|
|
Low-frequency Power Amplifiers
Matějka, Vojtěch ; Vorel, Pavel (referee) ; Patočka, Miroslav (advisor)
The aim of my bachelor thesis was to design a low-frequency amplifier with some specific parameters. The thesis includes several different connections of known and used amplifiers which are somehow unique or revolutionary. Also it contains the description of classes, the distortion and the structure of amplifiers. The low-frequency amplifier was designed with emphasis on resulting parameters. A design of a printed circuit and the prototype of the board were made. Then the resultant amplifier was modified and adjusted and finally its parameters were measured.
|
|
|
Class H audio power amplifier design
Spáčil, Tomáš ; Šebesta, Jiří (referee) ; Dušek, Martin (advisor)
This bachelor´s thesis is dealing with a plan of a low frequency ending amplifier of class H that is made of discreet parts. Content of this work is an explanation of basic terms and classes of ending levels low frequency amplifiers. The ending level in class H is written in detail including its possible kinds of solution. The own solution of amplifier in class H is completed by simulation and areal connectors to individual parts. The aim of this work is a prototype of a final look of a device with record about measurement of its basic qualities and their evaluation.
|
|
|
Class D audio amplifier for active loudspeakers
Cupák, Jan ; Punčochář, Josef (referee) ; Kratochvíl, Tomáš (advisor)
This master's thesis deals with design of D class audio final amplifier, which was output power 400 W for 4 ? load impedance. Designed audio amplifier is specifical for active speaker, which consists of satelite speakers and subwoofer. Further more it deals also with other functional blocks, e.g. balanced input preamplifier, active crossover and protection for safety running. Outcome of this work are schemes of each functional blocks of D class audio amplifier, whose functionality was verified by simulation. Thesis also contains full reference material including mechanical arrangement of functional blocks on printed connection board. The conclusion contains the measured parameters of function blocks of produced prototype and complete photographic documentation.
|
|
|
System of controlled generators of rectangular pulses
Holeksa, David ; Mišurec, Jiří (referee) ; Hanák, Pavel (advisor)
This bachelor thesis deals with the design system of controlled generators of rectangular pulses, which are burdened with toroidal coils. The objective is realization of the equipment to be controlled by a microcontroller, which will bring rectangular pulses to each coil according to pre-specified parameters. The resultant generator is capable of generating current pulses having an amplitude of 0.1 to 1 A and a pulse time of 1-10 ms.
|
|
|
Low-frequency Amplifiers
Doležel, Tomáš ; Vorel, Pavel (referee) ; Patočka, Miroslav (advisor)
The bachelor thesis deals with the involvement of the audio amplifier, design printed circuit boards, implementation and verification of measuring amplifiers. The proposed amplifier has an output of 100 W at nominal load 4 at a supply voltage of ± 30 V. The bandwidth of the amplifier is 550 kHz.
|
|
|
HF and IF circuits of shortwave radiostation
Šnajdr, Václav ; Vágner, Petr (referee) ; Lukeš, Zbyněk (advisor)
The study, description, design and implementation of selected blocks of multiband shortwave radio station are dealt with in the thesis. Focus is placed on the concept of multiband shortwave radio stations, with an emphasis on high frequency and intermediate frequency circuits. The first chapter is devoted to description of the transceiver block diagram which is designed as superheterodyne. The design of bandpass input filters, intermediate frequency crystal filters and output filters is described. Simulation results and the measured characteristics of the implemented functional blocks are presented. Furthermore, the amplifier circuits which maintain impedance matching of individual blocks are discussed. SSB signal generation in the transmitter part of radio station and final stage power amplification are depicted.
|
|
|
Audio amplifier working in class AB with 400W output power
Kopic, Jan ; Šotner, Roman (referee) ; Petržela, Jiří (advisor)
The content of the thesis is the theory related to low-frequency audio amplifiers that is summarized in a separate chapter. This section describes the division of these amplifiers according to various criteria, as well as their working classes and parameters that determine their behavior. In addition, this thesis contains a description of the principle of the function of the selected class AB amplifier, which is divided into individual functional blocks and completed by the addition of speaker protection circuit. Criteria of selection for important chosen components are mentioned in appropriate chapters and supplemented with data from components datasheets. The output results of the simulations are always commented and compared with the calculated values at the end of the relevant chapter. The attachment of the thesis contains PCB design for the device realization. The correct operation of build device has been verified and measured.
|
|
|
Design and construction of audio amplifier with advanced functions
Polkorab, Jaroslav ; Šotner, Roman (referee) ; Brančík, Lubomír (advisor)
This bachelor's thesis focuses on the design of a low frequency class-D amplifier with the minimum output power of 2x50 W. This amplifier will be used for personal use as a HiFi system with advanced features. The design focuses on an encoder controlled preamplifier with an IR remote control, a power amplifier and a switching mode power supply. The PSpice program was selected for the circuit simulation. The schematic designs are created in Easyeda, KiCad and PSpice.
|
|
| |
|
|
Audio amplifier working in class AB with 400W output power
Kopic, Jan ; Šotner, Roman (referee) ; Petržela, Jiří (advisor)
The content of the thesis is the theory related to low-frequency audio amplifiers that is summarized in a separate chapter. This section describes the division of these amplifiers according to various criteria, as well as their working classes and parameters that determine their behavior. In addition, this thesis contains a description of the principle of the function of the selected class AB amplifier, which is divided into individual functional blocks and completed by the addition of speaker protection circuit. Criteria of selection for important chosen components are mentioned in appropriate chapters and supplemented with data from components datasheets. The output results of the simulations are always commented and compared with the calculated values at the end of the relevant chapter. The attachment of the thesis contains PCB design for the device realization. The correct operation of build device has been verified and measured.
|
guest ::
