|
|
Network Configuration Synthesis and Verification
Černeková, Alžbeta ; Veselý, Vladimír (referee) ; Ryšavý, Ondřej (advisor)
The subject of this master's thesis is to address the topic of network devices configuring. It resolves the problems related to simplifying certain parts of configuration while eliminating frequent errors or issues. It introduces a solution to setting of IP addresses on router's interfaces. Furthermore it presents the generation of configuration for particular dynamic routing scenarios and its application and methods for its verification on network devices. It also demonstrates the preparation of configuration of VPN tunnel between two devices. The conclusion of this thesis contains possibilities for further extensions or improvements.
|
|
|
Preparation and characterization of poly-3-hydroxybutyrate copolymers
Kolomazník, Vít ; Kupka, Vojtěch (referee) ; Porubský, Tomáš (advisor)
This thesis evaluates the synthesis of copolymers based on poly-3-hydroxybutyrate (PHB). The goal is to create a material with the highest possible concetration of PHB with the smallest possible volume of crystal phase. PHB with lower molecular weight and hydroxyl end groups used for polyurethane synthesis was prepared by alcoholysis of PHB polymer with 1,4 butanediol. Polyethylene glycole (PEG) of various molar mass and ratio values was chosen in this thesis as a second reacting substance. Another substance used for copolymeration with PHB was the poly(butylene adipate-co-terephthalate) PBAT. Both variants used hexamethylenediisocyanate (HDI) as a non-toxic bonding agent. From these substances, a block copolymers comprised of soft and hard segments were formed. Hard segments are a result of PHB and it‘s crystalic structure. Soft segmets are comprised of PEG or PBAT macromolecules. The influence of soft segments of various length and molar ratio of reactants on overal polyurethane properties was evaluated. Prepared materials were charactrerized by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and infrared spectroscopy (FTIR). Molecular weight was measured by gel permeation chromatography (GPC).
|
|
|
Synthesis of core/shell quantum dots for diagnostics
Mihajlović, Ana ; Vaculovičová, Markéta (referee) ; Pekárková, Jana (advisor)
This thesis deals with biosensors based on modified semiconductor core/shell quantum dots (QDs) for diagnosis. The work is divided into four main parts. The first one discusses the theory required for the use of QDs in bioaplications, there are described methods of synthesis, modification, application and bioconjugation of QDs. In the experimental part, CdTe/ZnS QDs with core/shell structure were prepared, in which the core was modified by MPA, GSH and TGA. In the next step, these QDs were further modified using CDI, EDC and NHS as mediators in order to increase affinity to BSA (bovine serum albumine) and IgG (imunoglobuline G). Prepared conjugates were characterized by fluorescence spectroscopy (Infinite M200Pro, Tecan) and capillary electrophoresis (Agilent 7100).
|
|
|
Synthesis of Lanthanidocene Based Compounds
Pospíšek, Marek ; Zmrzlý, Martin (referee) ; Richtera, Lukáš (advisor)
The aim of this bachelor thesis is to summarize the issues of the polymerization catalytic systems based on lanthanidocene complexes. These complexes are subsequently divided by the structure into four basic groups. One part of this work deals with an overview of the most interesting results of the catalytic systems, which are then analyzed and assessed either in its entirety or point of view of catalytic activity, living mechanism of polymerisation and stereo or regioselectivity. The focus is also placed on type of monomers or the conditions of polymerization. In this part of thesis are also described general methods for their synthesis. Found analogies and generalization are commented from the point of view of the design of the catalytic systems for the purpose of choosing the stereo or regioselectivity, molar mass and its distribution. This gives significance to these complexes as catalytic systems for obtaining the required polymer properties. The acquired knowledge is used for the theoretical design of the catalytic system for controlled polymerization.
|
|
|
Remote Nature
Richtr, Pavel ; Suchánek, Jiří (referee) ; Krekovič, Slavomír (advisor)
In my thesis I deal with the interactivity between the weather and the virtual model, whose main output is sound. I'm trying to create generative installation where reacts virtua oraganism with real environment and generates signals that can be interpreted in a sound to explore the aesthetic relations of that connection.
|
|
|
Musical Signal Synthesis on Android
Mikulík, Jan ; Glembek, Ondřej (referee) ; Černocký, Jan (advisor)
The main task of this thesis is to design and implement new synthesizer on mobile platform under Android. The synthesizer generates three types of signals - sine, sawtooth and square. Two types of filters can be applied, low pass and high pass, and their cut-off frequency can be controlled. For the sound interpretation, an AudioTrack API was used. The synthesizer is controlled by zones, where one zone equals one tone. Zones can be selected by the user. For this synthesizer, a simple user interface was created.
|
|
|
Modification of polyurethane by biodegradable poly(hydroxybutyrate)
Kupka, Vojtěch ; Žídek, Jan (referee) ; Vojtová, Lucy (advisor)
Cílem předložené bakalářské práce byla syntéza elastomerního polyuretanu plněného biodegradabilním polyhydroxybutyrátem. Vzorky byly podrobeny analýze morfologie pomocí rastrovací elektronové mikroskopie, mechanické vlastnosti byly testovány jednoosou tahovou zkouškou. Práce se taktéž zabývá předpovědí mechanických vlastností na základě teorií kaučukové elasticity. Bylo zjištěno, že výsledný materiál je částicový kompozit, kde se vzrůstajícím hmotnostním obsahem plniva v materiálu vzrůstá modul pružnosti. Predikce tahových křivek pomocí softwaru SEC.exe ukazovala pro reálný průběh křivky nereálné hodnoty hustot polymerních řetězců. U modelů, které vykazovaly reálné hodnoty hustot, byly naopak hodnoty napětí vyšší, než ve skutečnosti naměřené.
|
|
|
Modification of thermosensitive copolymer with bioactive substances for medical applications
Debnárová, Simona ; Vojtová, Lucy (referee) ; Michlovská, Lenka (advisor)
Biodegradabilné syntetické polyméry nesú vlastnosti, ktoré ich zvýhodňujú oproti iným materiálom používaným na poli regeneratívnej medicíny a tkanivového inžinierstva. Najdôležitejšie výhody zahŕňajú schopnosť prispôsobovať mechanické a chemické vlastnosti aj kinetiku degradácie. Obzvlášť polyestery sú zaujímavé z pohľadu na ich biodegradáciu. Podliehajú hydrolýze, počas ktorej dochádza k štiepeniu esterových väzieb a degradačné produkty sú metabolizované bez akýchkoľvek škodlivých účinkov. Diplomová práca je zameraná na syntetické biodegradabilné triblokové kopolyméry PLGA-PEG-PLGA s obsahom kyseliny polymliečnej (PLA), kyseliny polyglykolovej (PGA) a polyetylénglykolu (PEG), ktoré patria do skupiny biodegradabilných polyesterov. Obsah hydrofilnej a hydrofóbnej zložky polymérneho reťazca spôsobuje amfifilný charakter kopolyméru. Pripravené triblokové kopolyméry sú schopné tvoriť hydrogél pomocou fyzikálneho sieťovania v dôsledku ich amfifilného charakteru. Tieto materiály zaznamenali významný záujem vo vedeckej oblasti. Teoretická časť diplomovej práce všeobecne popisuje hydrogély, bližšie sa venuje fyzikálnemu sieťovaniu amfifilných blokových kopolymérov a mechanizmom degradácie. Podrobný popis triblokového kopolyméru PLGA-PEG-PLGA je rozdelený na PLGA kopolyméry, PEG a ich fyzikálno-chemické vlastnosti. Zahrnuté sú aj poznatky o chemickej funkcionalizácii anhydridom kyseliny jantárovej, anhydridom kyseliny itakonovej a kyselinou listovou. Dopamín je prezentovaný ako spájací faktor a spomenuté sú taktiež najdôležitejšie bioaktívne látky. Experimentálna časť sa zaoberá konkrétnymi metódami syntézy, ktoré viedli k funkcionalizácii a modifikácii triblokových kopolymérov PLGA-PEG-PLGA. Funkcionalizáciou anhydridom kyseliny itakonovej bol získaný kopolymér s oboma koncami obohatenými o reaktívne dvojité väzby a karboxylové funkčné skupiny. Dvojité väzby umožňujú chemické sieťovanie a koncové karboxylové skupiny ponúkajú možnosť modifikácie kopolyméru biologicky aktívnymi látkami. Modifikácia bioaktívnymi látkami L-lyzínom a butylamínom obohacuje polymérnu sieť a dopamín v roli spojovacieho faktoru poskytuje univerzálnosť v naväzovaní bioaktívnych látok, stabilizuje ich a zabezpečuje zachovanie biologickej aktivity naviazaných bioaktívnych látok predĺžením reťazca. Výsledné produkty boli charakterizované pomocou 1H NMR, FTIR a DRA analýz. Funkcionalizácia anhydridom kyseliny itakonovej bola prevádzaná v tavenine. Podarilo sa dosiahnuť vyššieho množstva naviazanej kyseliny itakovovej s hodnotou 79,4 mol % a následné modifikácie boli prevádzané vo vodnom roztoku, organickom roztoku a taktiež v tavenine. Bolo zistené, že najefektívnejšia metóda modifikácie bola syntéza v organickom roztoku s rozpúšťadlom N,N-dimetylformamidom a aktivačným systémom dicyklohexylkarbodiimid/4-(dimetylamino)pyridínom. Najvyššie množstvo naviazaného dopamínu bolo 18,6 mol %, najvyššie množstvo naviazaného butylamínu bolo 7,8 mol % a L-lyzín sa naviazať nepodarilo.
|
|
|
Simple synthesizer with eight-bit controller
Kuczman, Petr ; Frýza, Tomáš (referee) ; Fedra, Zbyněk (advisor)
This work contains information about physical properties of sound and briefly defines basic types of synthesis of audio signals. The more detailed view was putted on pulse weight modulation that has been used. Furthermore, it deals with possibilities provided by connected peripheries. There was created a list of controlling components that summarizes their properties and the real chance of implementation with eight-bit microprocessor. Second part of the work contains description of methods and structure of program that simulates synthesizer itself as well as methods for uploading values in to registers.
|
|
|
Evolutionary Resynthesis of Combinational Circuits
Kocnová, Jitka ; Sekanina, Lukáš (referee) ; Vašíček, Zdeněk (advisor)
This master thesis is concerned about the resynthesis of combinational circuits with the help of evolutional principles. The first part of this text describes logic synthesis and its weak spots, evolutional synthesis and its advantages, and also some of the existing synthesis programs. The second part shows usage of graph algorithms in logic synthesis and their possible usage in an extension for the chosen synthesis program. Suggested design and practical implementation of the extension is also described in this part. In the third part extension testing is mentioned. The fourth part is the last one and concludes gained knowledge and results.
|
guest ::
