|
|
Switched power supply testbench
Zatloukal, Tomáš ; Bohrn, Marek (referee) ; Pavlík, Michal (advisor)
The following work deals with a design of power supply testbench with design of their replaceable modules and circuits for their measurement. The final product should be used for faster design and tuning of switching power supplies. In this essay, there is detailed description of switching power supplies, analysis of support circuits and calculations for design. Based on theoretical background and selected parameters, a connection concept will be created. This concept will be validated by a device that will consist of main board, changeable modules and measurement circuits.
|
|
|
Utilization of local systems for power system regulation
Kostov, Jiří ; Geschwinder, Lukáš (referee) ; Bartošík, Tomáš (advisor)
Bachelor’s Thesis deals general information about methods of regulation of elektrification systems, including basic principles of regulation of frequency, regulation of voltage and regulation of reactive and active power. Work includes information about aggregate remote control system, power plants that participate on regulation and self device for regulation and controlling of reactive power. Work engages on new options in section of regulation and his requirements for distribution sites. Part of work deals information about renewable natural energy sources and his requirements for distribution sites.
|
|
|
Intelligent BMS for lithium batteries
Vašíček, Jakub ; Kazda, Tomáš (referee) ; Vyroubal, Petr (advisor)
This thesis is focused on design of electronic system called BMS, which is necessary for lithium batteries safety operation. The first part contains a brief description of lithium battery design. The following is an overview of the main parameters of this type of batteries. The next part describing various methods of state of charge (SoC) estimation and the ways to ensure uniform charge of each cell. Based on the theoretic analysis, the block diagrams for individual parts of BMS were designed. The following describing device assembly and design of control algorithm. The last part is devoted to measurement of achieved attributes. In conclusion, results of the work are discussed and possibilities of future improvements are suggested.
|
|
|
Analysis of methods of measurement of fully-differential frequency filters
Kučera, Tomáš ; Kubánek, David (referee) ; Jeřábek, Jan (advisor)
This bachelor thesis is analysing methods of measuring of differential frequency-selection filters with usage of active elements especially in current mode. Firstly it describes techniques of scheme of differential frequency-selection filters in current mode and conversions of linkage from voltage to current mode. Next the thesis aims at methods of measuring of particular voltage converters to differential current and back from differential current to voltage, which are an integral part for measurements of differential frequency-selection filters in current mode. For verification of characteristics of solutions designed separately as well as in cascade with particular solvent of frequency-selection filter there were used simulation instruments SNAP and OrCAD there, chosen resolutions were constructed and its characteristics were checked during laboratory test.
|
|
|
Simulation of Effects of Short-circuit Currents in HV Switching Stations
Tománek, Miloslav ; Buriánek, Jiří (referee) ; Toman, Petr (advisor)
This thesis is engaged in a theoretical calculation of short-circuit currents in electric power system in compliance with the norm ČSN 60909-0 and first of all with calculation of dynamical and thermal effects of short-circuit currents in HV switching stations in accordance with the norm ČSN 60865-1. Next the thesis is engaged in a production of programs for simulation of mechanical effects of short-circuit currents with respect to a dimensioning of constructional elements of switching station and afterwards in a practical simulation of selected parts of the real switching station type „H“ in Slavkov u Brna.
|
|
|
Characteristic of photovoltaic system
Pokorný, Marek ; Dolenský, Jan (referee) ; Vaněk, Jiří (advisor)
The aim of this work is informed first about photovoltaics universally, works to inform the photovoltaic panels and complete plants. The work also includes instructions on how to implement PVP in accordance with law. Another part is the rough draft of the photovoltaic power 30 kWp, which can be placed on the house, computation and calculation of investment and them profitable investments to time. Design is made in two separate forms of the Fronius Solar and Sunny Design, their outputs are compared. The practical part of this work cooperates with the company SOLARTEC Ltd. for experimental measurements of the photovoltaic system and develop a methodology for setting the properties of real solar systems in operation from the measured data then stored in a database. These data further evaluate and compare the similar operating conditions. This data will show as the course of production of electricity during the typical day in percentage terms, depending on the incident irradiance, cell temperature, angle of incident radiation, etc. We can compare what it looks like an ideal day in terms of production of photovoltaic power, with the other days. Further are in work mentioned histograms achievement panel behind classical day and behind all - time investigation.
|
|
|
Magnetic fields for biomedical experiments
Otýpka, Jan ; Cipín, Radoslav (referee) ; Patočka, Miroslav (advisor)
In this work deals with magnetic fields for use in biomedicine. This solution involves the choice of the correct geometric arrangement of coils for generating magnetic field with a homogeneous distribution of magnetic induction of the widest possible area. The paper compares thre traditional types of coils, solenoid, toroid and Helmholtz coil. For Helmholtz and solenoid coil and is then carried out an analysis of the magnetic flux density in the inner space. Next part is devoted to electrical resonance in the LC circuit. This is then utilized for the development of pulsed magnetic field in the Helmholtz coil. It summarizes the theoretical and practical knowledge to design and construction of resonant converters. The end is devoted to the measurement of circuit parameters and verification of theoretical knowledge.
|
|
|
Low power current transformers
Zolich, Ladislav ; Hrabčík,, Miroslav (referee) ; Dostál, Lukáš (advisor)
Master‘s thesis is focused on current instrument transformers, current sensors and low power current transformers. Discussion is made on advantages and disadvantages of each measuring principle. Low power current transformers is then designed and manufactured. Manufactured LPCT is then measured for accuracy class. Results are then compared.
|
|
|
Laboratory power source
Havlíček, Lukáš ; Drexler, Petr (referee) ; Szabó, Zoltán (advisor)
he goal of this semestral work is to design a switch-mode power supply with the following requirements. The input voltage is determined as constant 230 V AC, whereas output voltage should be infinitely adjustable in range of 0 V – 30 V DC. The maximum output current loading is 3 A. The output voltage and output current are controlled by means of a microprocessor.
|
|
|
Chytrá zásuvka s podporou měření proudů
Janča, Jan
This work is aimed at creating a prototype of a smart socket that is able to measure the current power consumption and remotely switch on an individual socket. The prototype itself is built on an Arduino microcontroller and Arduino compatible components. Subsequently, all components are placed in a 3D printed box. The box is made of self-extinguishing material. A web interface is created for controlling the box, in which the current electricity consumption is found. This data is also stored on an SD card in a text file for future reference. The program for the Arduino is written in C++ and for the web interface using HTML.
|
guest ::
