|
|
Process pipeline design
Motyka, Ondřej ; Babička Fialová, Dominika (referee) ; Jegla, Zdeněk (advisor)
This bachelor thesis deals with the description of each areas and activities in designing pipeline routes for process equipment, that the designer or constructor has to propose properly and appropriately. First part of this bachelor thesis is focused on the theoretical knowledge and necessary knowledge for the design of a functional route for process equipment. Also, more detailed description of the designing the pipeline can be seen in the first part, such as pipe gripping, thermal expansion, corrosion and pipe insulation. The practical part will deal with the individual steps in creating a project according to the task from engineering organization and creating drawing documentation using the available software. The aim is to describe the procedure for working with this software and the subsequent introduction of this knowledge into the practical design of pipeline routes.
|
|
|
Project documentation of wiring for the revitalization of residential house
Štangl, Jan ; Tesař, Radek (referee) ; Bátora, Branislav (advisor)
This thesis deals with the issue of the revitalization of the outdated electrical wiring in houses with regard to the valid standards. In the introduction to the theoretical part of the thesis the current connection conditions of the E.on distribution network are summarized, then there is a subchapter dedicated to the ways of conductors storing. The following section is devoted to the common spaces as far as lighting and socket circuits are concerned. The thesis continues with a part which contains an analysis of the existing conditions of the building, including the calculation of the risks of unprotected and protected building. The work is then directed on practical technical documentation heavy-current (main lead, lead to the distribution boxes, lightning conductor and grounding) and light-current (common TV antenna, house phone) wiring in the building. The mentioned section contains calculations necessary for determination of the correct wire cross section based on the way of storing, ambient temperature and output power. In the same section there are processed also lighting designs in all the common areas (for example, the intensity of the illumination determined by the ČSN standards emitted by the Czech Office for Standards, Metrology and Testing). In chapter no. 4.9 the lightning conductor including the earthing of the building is drawn up.
|
|
|
Projekt řešení lokality Radošov v k.ú. Veselí nad Moravou
Vlčková, Kateřina
This diploma thesis deals with the solution of the locality Radošov in the cadastral area Veseli nad Moravou. The thesis is divided into two parts, theoretical and practical. The theoretical part describes the bases of the work, dealing mainly with the issue of realization of landscape elements of woody vegetation and also with the issue of recreation in the landscape. The theoretical part also describes the methodology of field survey and data processing. Based on the bases of the work and the processed data, three alternative solutions of the locality are defined according to the different rate of support of recreation in the territory at the expense of biodiversity (1st recreational option, 2nd intermediate intervention and recreation rate and 3rd biodiversity conservation) and the process of selecting the optimal variant is also described. The practical part is the implementation project of the optimal variant of the site, prepared in the form of modified project documentation for zoning proceedings.
|
|
|
Comparison of free available software for the calculation of electric network parameters
Dvořák, Radim ; Janík, Daniel (referee) ; Ptáček, Michal (advisor)
The aim of this bachelor thesis is to compare freely available software for calculating the parameters of electrical networks. The first part is used to give an idea how to operate in the programs Sichr, DOC, Spider (xSpider) and ~ SIMARIS design and their evaluation in terms of usability, requirements, graphical interface and controllability. Furthermore, a technical analysis of specific topologies of specified distribution networks is performed in the work. In the second part, the calculation of network parameters was performed using the SW above. Finally, the realized calculations of voltage drops and short-circuit currents using individual programs were compared with each one another.
|
|
| |
|
|
Selected designing works on the acid water stripping process
Motyka, Ondřej ; Kilkovský, Bohuslav (referee) ; Jegla, Zdeněk (advisor)
The diploma thesis is focused on selected designing works related to the design of a specific process of acid water stripping. The main purpose of the work is to describe the procedure and the obtained results for these performed design work based on the relevant assignment and the process requirements. In the introductory two chapters, the work focuses on process introduction and description of main process equipment. The following chapters are devoted to the description of the designing works, specifically simulation of the process in CHEMCAD, design calculation of the spiral plate heat exchanger for feed preheating, creation of 3D model and drawing documentation using AutoCAD Plant 3D and lastly strength analysis of the selected pipeline. The main outputs of this work are mainly generated result reports from the process and equipment simulation and strength analysis of the solved pipeline route, 3D model of the process and selected technical and drawing documentation. At the end of the diploma thesis, the performed activities and their outputs are summarized and evaluated.
|
|
|
Design of system wiring of hostel complex, student dormitory and bar
Sladký, Tomáš ; Mastný, Petr (referee) ; Janík, Daniel (advisor)
This diploma thesis focuses on the designing of the systematic wiring in hostel complex, including student dormitory and bar. The work is divided into two parts. The theoretical part involves an overview of current most used intelligent systems. Furthermore, there is a description of the TECO Foxtrot system, which is used to control the complex. The theoretical part summarizes the basic definitions for creating project documentation. Finally, the chapter closes with an outline of a general artificial and escape route emergency lighting design generated using WILS 7.0 software. In the practical part of the diploma thesis, there is a complete project documentation consisting of all requisites needed in the given level of documentation for the construction of a complex of hostel, dormitory and bar using the TECO Foxtrot system. The project documentation contains floor plans of the whole complex, in which the power and data distribution are drawn. It also contains a diagram of wiring of power and system switchboards, topological diagram of power and system distribution, budget and technical report.
|
|
|
Modern approaches to designing electrical equipment with a focus on railway construction
Forejtník, Jan ; Pěcha, Jiří (referee) ; Bátora, Branislav (advisor)
The topic Modern Approaches to Designing Electrical Equipment with a Focus on Railway Construction responds to the decision of the Government of the Czech Republic to introduce the BIM method for government over-the-counter contracts from 1 January 2022. The government evaluated the BIM method as an effective tool for digitizing the construction industry. The diploma thesis deals with the method of designing high-current equipment, technologies and distribution on railways according to this new method. The work summarizes information about the present method of design, used high-current electrical equipment on the railway, the near and distant future of railway operation, the organization of administration and maintenance of equipment. It discusses the principle of the BIM method and basic software solutions supporting design activities according to this new method. The Promis.e software published by Bentley is also described in detail, which supports the design of electrical equipment for linear structures according to this method. The BIM method is a means of fulfilling the essence of Construction 4.0. It uses uniform data formats, a common data environment, working with non-graphic information. In the second part of the diploma thesis, the drawing documentation for the sample project of high-current distribution of the railway station was prepared. It was first created using AutoCAD software. After that, the sample project demonstrates the basic principles of the BIM method using Promis.e software. Furthermore, this project is evaluated, both methods of design are compared. The procedure of introducing the BIM method for the design of electrical equipment in a specific design company is proposed and other possible steps in working with the Promis.e software are discussed. The way of creating a and adding element libraries is described. At the end of the diploma thesis it is stated that to successfully master the design work according to the BIM method, it is necessary to have experience with design work in the field, know the principles of the BIM method, choose a suitable software solution, continuously and thoroughly manage these tools and train staff. Under these conditions, it will be possible to make full use of the potential of the BIM method.
|
|
|
Teaching software for designing an intrusion alarm system
Malík, Ondrej ; Zeman, Václav (referee) ; Burda, Karel (advisor)
In this thesis, we propose a web application for creating basis of documentation for intrusion alarm systems. The application will serve students of the course Security systems for their project work. In the first part of the thesis, we describe general principles of intrusion alarm systems operation that are important for a correct design of a functional and secure alarm system. The proposed application builds on these principles and its functioning is described in the second part of the thesis.
|
|
|
Process pipeline design
Motyka, Ondřej ; Babička Fialová, Dominika (referee) ; Jegla, Zdeněk (advisor)
This bachelor thesis deals with the description of each areas and activities in designing pipeline routes for process equipment, that the designer or constructor has to propose properly and appropriately. First part of this bachelor thesis is focused on the theoretical knowledge and necessary knowledge for the design of a functional route for process equipment. Also, more detailed description of the designing the pipeline can be seen in the first part, such as pipe gripping, thermal expansion, corrosion and pipe insulation. The practical part will deal with the individual steps in creating a project according to the task from engineering organization and creating drawing documentation using the available software. The aim is to describe the procedure for working with this software and the subsequent introduction of this knowledge into the practical design of pipeline routes.
|
guest ::
