|
|
Bulk forming technology of piston of disk brake
Toman, Svatopluk ; Samek, Radko (referee) ; Forejt, Milan (advisor)
The project of Master’s thesis elaborated within engineering studies of branch 23-03-T002 proposes a technology of production of disk brake piston made of low-carbon steel EN C10E. Supposed production amount is 300 000 pieces per year. With knowledge of literary study on the theme of cold steel bulk forming, three variants of production technique were proposed. The chosen one, for which the technological and energy computations were accomplished, consists of two basic forming operations. For manufacture realization was selected three-stage automatic forming machine TPD 630 (manufacturer Šmeral Brno) with nominal forming output of 6 300 kN. As a material of extruding punch, tool-steel EN X100CrMoV5-1was chosen. For extruding dies was selected high speed steel HS 6-5-2 and its shrink ring is made of high quality steel 60WCrV8. Optimalization of tool properties was performed with specialized PC software.
|
|
|
Piston for 77kW 4-stroke CI-engine
Štol, Michal ; Svída, David (referee) ; Dundálek, Radim (advisor)
Annotation Michal Štol Piston of 4-stroke supercharged diesel engine for passenger car ÚADI, 2008, 39 pages., 18 images. In this bachelor works we will focus on description of piston’s group mostly, with characteristic properties and sorts of production. Further, we will make basic design of piston with strenght control of critical piston intersections. Then we can make drawings of individual part of piston.
|
|
|
Crank mechanism of in-line three-cylinder diesel engine
Cetkovský, Martin ; Rauscher, Jaroslav (referee) ; Píštěk, Václav (advisor)
Objective bachelor’s thesis, which will be achived is, for scheduled elementary geometric, thermodynamic and operation parameters cylindrical unit of in-line three-cylinder diesel engine, perform calculation of thermodynamic cycle, design elementary dimensions of piston group and for schedule operation modes perform strength check of connecting-rod eye. Consequently rating value compare with value of real true diesel engine. In introduction is explained basic principle of diesel engine and their design concept. The bachelor’s thesis is consisted of description of calculation and supplement, where the calculation is done. The calculation is accomplished in three parts. Thermodynamic cycle is solved in the first part. Forces acting on piston group are solved in the second part and strength calculation and check of connecting-rod eye is solved in the third part. The end is focused on evaluation of calculation and recent solution of diesel engine.
|
|
|
Cylinder unit of motocycle two-stroke engine
Stejskal, Miroslav ; Novotný, Pavel (referee) ; Píštěk, Václav (advisor)
Miroslav STEJSKAL Cylinder unit of motorcycle two-stroke engine In the beginning is briefly described two-stroke engine features. Furthermore, according to the set of basic geometric and thermodynamic parameters, the maximum pressure in the cylinder during one engine cycle. For the selected operating modes are carried out strength tests of the upper piston and connecting rod eye. In conclusion, the results are evaluated.
|
|
|
Piston Modification for Suzuki Swift 1,3 GTi 4-stroke SI-engine
Bastl, Ondřej ; Blaťák, Ondřej (referee) ; Svída, David (advisor)
This bachelor’s thesis is engaged in a piston modification of engine type G13B of vehicle Suzuki Swift 1.3 GTi. The aim of my work is to perform changes of some dimensions of the piston, while complying with some of the main dimension, to increase its stress resistance and the engine’s power. Strength calculation for the piston to last during the whole service life of the engine is an indispensable part of this work.
|
|
|
Powertrain of experimental single-cylinder spark ignition engine
Číp, Tomáš ; Rauscher, Jaroslav (referee) ; Píštěk, Václav (advisor)
Objective of bachelor’s thesis is, for noted geometric, thermodynamic and operation parameters cylindrical unit of experimental single-cylinder spark ignition engine, perform calculation of thermodynamic cycle, project basic proportion of piston group and for noted operation modes perform strength check of connecting-rod eye. In preamble is stated basic use of spark -ignition engines, their operation principle and basic fisson. The bachelor’s thesis is consists from of calculation, which is continuously described.The calculation is consists from four parts. The first part is calculation of thermodynamic cycle, in the second part are calculated concept piston group, in next part are calculated forces reacting to piston group and fourth part is strength calculation and check of connecting-rod eye. In the last part is results evaluation of calculation.
|
|
|
General Solution of Cranktrain Mechanical Losses
Honc, Robert ; Píštěk, Václav (referee) ; Novotný, Pavel (advisor)
Master’s thesis deals with the description of cranktrain friction and presents and describes experimental cranktrain friction loss evaluations and computational cranktrain friction loss evaluations. The main problem is the creating software solution of selected computational friction loss evaluations that leads to calculation of cranktrain friction losses. Master’s thesis describes chosen computational friction loss methods and the subsequent creation of the software solution. After application on chosen internal combustion engine, it evaluates the results and draws conclusions about functionality of the software solution.
|
|
|
Characteristic Piston Ring Failures and Their Corrective Methods
Orság, Josef ; Knotek, Jiří (referee) ; Raffai, Peter (advisor)
This Bachelor's thesis concerns the most common failures of piston rings. The first part of this thesis focuses on the design of a piston ring and on the load affecting it. The second part describes various kinds of lubrication. This section also shows, which lubrication states occur during operation of internal combustion engines. And final part is devoted to the most common failures of the piston rings and how to prevent them.
|
|
|
Piston for 108kW 4-stroke SI-engine
Burýšek, Karel ; Dundálek, Radim (referee) ; Svída, David (advisor)
This Bachelor work is engaged in computing and constructional concept of a piston, intended for the four-stroke spark-ignition engine for private cars whith a view to main dimensions of a piston so that it should be able to work in conditions, which are determinated to, for all the period of it’s lifetime. We need to set strength calculations, which are inseparable part of the project procedure.
|
|
| |
guest ::
