|
|
On the analyses of cutiing tools coated with PVD coatings
Malý, Martin ; Osička, Karel (referee) ; Píška, Miroslav (advisor)
In this diploma thesis, literary research about drilling and coating technology focused on PVD coatings was performed. Furthermore, there is an overview of cutting materials. In the experimental part of the work, the attention is dedicated to tests of twist drills from cemented carbide and high-speed steel materials. For these drills, the feed force Ff and the cutting moment Mc were measured when drilling into austenitic stainless steel. At the end of this work, the technical and economic evaluation of the practical part is presented.
|
|
|
Machining of hard-to-machine materials by turning
Švorc, Josef ; Fiala, Zdeněk (referee) ; Píška, Miroslav (advisor)
The thesis is focused on machining of hard-to-machine materials. In the theoretical part hard-to-machine materials are divided and characterized. Furthermore, the thesis specifies hardened steels and their heat treatment, machinability and mechanism of wear and chip formation. There are tool materials and their classes suitable for machining hardened steels. The practical part deals with the influence of the cutting conditions on the roughness of the machined surface when turning hardened steel.
|
|
|
Cutting ceramics and its effective use
Heča, Jan ; Sámelová, Vendula (referee) ; Humár, Anton (advisor)
Thesis dealing with cutting ceramics and its efficient use. Introduction describes the general characteristics of the cutting of ceramics, its history and development and production of various kinds. This section describes the mechanical and physical properties with potential application in machining. The se-cond part is an overview of cutting-frame in the range of selected world leaders. Ano-ther section focuses on general assessment of the power of cutting tools and other ma-terials comparison. The fourth part, is comparing the working conditions of producers and tools intended for cutting.
|
|
| |
|
|
Technological aspects of tools for wood machining
Brlica, Vlastimil ; Humár, Anton (referee) ; Prokop, Jaroslav (advisor)
The fully fashioned master’s thesis within the frame of the master’s study at the Fakulty of mechanical engineering deals with subject woodworking tools. There are characteristics of wood and tool materials used for woodworking. There is an emphasis on milling cutter in each case of construction of selected woodworking tools. Whereas there is concrete proposal of milling cutter used for production of half round profile – half round concave cutter – at the end of the thesis.
|
|
|
Cutting ceramics and its effective use
Heča, Jan ; Prokop, Jaroslav (referee) ; Humár, Anton (advisor)
Thesis dealing with cutting ceramics and its efficient use. Introduction describes the general characteristics of the cutting of ceramics, its history and development and production of various kinds. This section describes the mechanical and physical properties with potential application in machining. The se-cond part is an overview of cutting-frame in the range of selected world leaders. Ano-ther section focuses on general assessment of the power of cutting tools and other ma-terials comparison. The fourth part, is comparing the working conditions of producers and tools intended for cutting.
|
|
|
Cutting ceramics and its effective use
Kavalír, Vít ; Sedlák, Josef (referee) ; Humár, Anton (advisor)
Master’s thesis are concerned with the cutting ceramic materials and its ef-fective usage. The first part of the thesis is focused on the general properties of the cutting ceramics, its history, development, production and description of the various types. This part includes as well a description of the mechanic-physical properties and the potential of the usage for machining. The second part of the work solves the general evaluation of the cutting power. The main issue in the next part is the identification of cutting ceramics range and the selection accor-ding to main world producers. The fourth part deals with the assessments and the comparison of the working conditions for different types of the machined ma-terials. The technical economic assessment shows the potentials in the total pro-duction costs reduction.
|
|
|
Cutting ceramics and its effective use
Fialová, Kateřina ; Prokop, Jaroslav (referee) ; Humár, Anton (advisor)
The diploma work is focused on the ceramic tool materials and its effective use. The introductory part of the work contains the detail characteristic of the ceramic tool materials from the point of view of their dividing, physic-mechanical propertis, production methods and marking. The main part of the work is focused to judging of the ceramic portion at the production assortment of the top World producers of tool materials and to evaluation of cutting ability of the particular materials of these producers. The detail analysis of recommended cutting conditions, which is aimed to an effective use of the ceramic materials, had been worked up for this purpose. The technical economic analysis confirms, that the present effective aplications of ceramic are limited only for specific cases of machining cast irons, steels and alloys.
|
|
|
Cutting ceramics
Kasalová, Aneta ; Kalivoda, Milan (referee) ; Humár, Anton (advisor)
This bachelor´s thesis deals with cutting ceramics. The first part generally describes the materias intended for production of cutting tools and their charasteristics. Second part of this thesis is focused on the cutting ceramics, it´s history, distribution, production, structure and properties. In the last part the assortment of the companies CeramTec, Kennametal and Sandvik Coromant is described.
|
|
| |
guest ::
