|
|
CREATION OF NANOSTRUCTURES ON SURFACES OF SOLID MATTER USING HYBRID METHODS
Rudolfová, Zdena ; Mikulík, Petr (referee) ; Horová, Ivana (referee) ; Kolíbal, Miroslav (advisor)
This thesis deals with the study of GaAs surface properties and with methodology of metal (mainly gold) nanoparticles deposition on GaAs substrate. GaAs has complicated surface oxides structure, which are very reactive when exposed to various chemicals (both acids and alkalines) and therefore they change GaAs surface properties. That is why the study of this properties is crucial for understanding of GaAs surface reactions on metal particles colloidal solution, from which the nanoparticles are deposited on the surface. The possibilites of GaAs surface etching and passivation are discussed. These should lead to surface stability enhancement during colloidal nanoparticles deposition. There was also studied the influence of adhesive polymer monolayer grown on GaAs substrate to the amount of nanoparticles deposited to the surface after substrate immersion into colloidal solution. This thesis concentrates on analyzing of methods, how the gold colloidal nanoparticles can be deposited selectivelly, only to defined areas. The areas were defined using charged particle beam.
|
|
|
Local electrical conductivity measurements in AFM tapping mode
Dao, Radek ; Konečný, Martin (referee) ; Pavera, Michal (advisor)
This bachelor thesis is concerned about the development of a probe for local electrical conductivity measurements in tapping mode Atomic Force Microscopy. The teoretical part gives a short overview of Scanning Probe Microscopy techniques, with the focus being on Conductivity Atomic Force Microscopy. Furthermore, the measuring regime in which the probe operates is described here, as well as the basic component of the probe, the quartz tuning fork. The experimental part follows the iterative development process, and contains a chapter dedicated to making of very sharp tips. The final chapters describe the preparation of test samples, which were used to prove the functionality of the probe and the measurement of local electrical conductivity itself.
|
|
| |
|
|
Advanced techniques of micromachining
Šalomoun, Vojtěch ; Prášek, Jan (referee) ; Pekárek, Jan (advisor)
Fabrication of micro-electro-mechanical systems (MEMS) requires advanced level of miniaturization, which is not achievable by technology used in microeletronics. Socalled micromachining covers many unique techniques of material processing to get microstructures with possible dimensions below 1 m. This bachelor’s thesis gives a general introduce to micromachining of MEMS. Its focus is on bulk and surface micromachining by wet and dry etching. The practical part contains design of microstructures, their manufacturing process and creation of computer models in CoventorWare suite.
|
|
|
Optimization of PCB Process Developing and Etching
Nerušil, Petr ; Zatloukal, Miroslav (referee) ; Starý, Jiří (advisor)
Bachelor´s thesis deals with photoresist developing and copper etching – these ones are the key operations in the double layer PCB production realised with pattern plating subtractive technique. Test pattern and a schematic diagram of the technological process for quality control in the practical part. Main part of this thesis is focused to operations of photoresist developing and to inspection and evaluation of photoresist width changes on test pattern during developing and etching including copper etch factor.
|
|
|
Low power MEMS heating membrane
Svatoš, Vojtěch ; Pekárek, Jan (referee) ; Hubálek, Jaromír (advisor)
The aim of this thesis is to create the MEMS heating membrane with low power consumption. This work includes the main of design and fabrication processes of these heating elements. It was decided that the final sample will be created as suspended membrane type of the structure. It the end of the thesis there is detailed overview of the whole fabrication processes used for fabrication of final samples and the experiment to prove the resistance due to thermal stress.
|
|
|
Nanoelectrodes for biophysical measurements
Márik, Marian ; Hrdý, Radim (referee) ; Hubálek, Jaromír (advisor)
The aim of the project is formation of nanoelectrodes on the silicon wafer surface by thin-film techniques combined with lithography and nanotechniques developed in LabSensNano. Project is engaged in lithography and in preparation of silicon wafers. Furthermore is proposed a brief proposal of electrodes, proposal of realization and current state of the experiment.
|
|
|
Properties of electrode materials for alcaline accumulators
Fusek, Petr ; Vrbický, Jiří (referee) ; Sedlaříková, Marie (advisor)
The Bachelor´s Thesis is aimed at the problematic of the binders, that effects the features of the positive electrode of alcalic accumulators. The additive used on nickel´s electrode was cobalt. In the practical part of this thesis there is described a process for etching the nickel electrode and the following electrodepositions applied on these electrodes. Measurements of different concentrations of nickel and cobalt were examined and analysed in the graphs which are part of this thesis. There have been made comments of these graphs and the conclusions and observations as well.
|
|
|
New electrode structures for alkaline accumulators
Fusek, Petr ; Novák, Vítězslav (referee) ; Vrbický, Jiří (advisor)
Master´s thesis is focused on development of electrodes used in alcaline accumulators, by using new kinds of materials and compounds. Basic possitive eletrode was made of nickel, on this electrode were applied new layers of Ni(OH)2 by using the method called electrodeposition. For electrodeposition was used solution with Ni(NO3)2 in diverse concentrations. Later on, this material was enriched with aluminium admixtures to increase stability of alfa modification in Ni(OH)2. These concentrations were measured and analysed in diagrams. For measurement was used device Biologic. The diagrams were commented with recommendations for production use in accumulators.
|
|
| |
guest ::
