|
|
Crane Runway of Container Transshipment in Moravský Krumlov
Robotka, David ; Barnat, Jan (referee) ; Pilgr, Milan (advisor)
The aim of this paper is focuses on the design and to check of a supporting steel structure of an outdoor crane runway for an overhead crane for container manipulation. The structure is located in Moravský Krumlov. The crane with carrying capacity 50/12,5 t, hoisting class of appliance HC3 and claffication of fatigue actious s5 moves on a track. Total length of the runway is 50 m with span of the crane bridge 28,5 m of a total height 13 m above the terrain level. Crane runway beam of the main crane track consists of a welded single symmetric I profile, and is accompanied by trussed surge girder of crane runway beam. Spatial rigidity of the structure is provided by columns in a lateral direction, and by braking bracing in the longitudal direction. The columns are designed as a plate column, in the shape of double symmetric I profile. The load-carrying structures are made from a S355 steel grade, while the columns are made from a S235 steel grade.
|
|
|
Hall for Engineering Production
Slezák, Jaroslav ; Pilgr, Milan (referee) ; Karmazínová, Marcela (advisor)
The aim of the bachelor thesis was to design and assess a steel two-nave hall for engineering production in Rajhrad. The hall has a rectangular plan with a width of 32 m (20 m and 12 m) and a length of 63 m. The total height of the main nave is 13.5 m. One bridge crane with a capacity of 5 t and a span of 19 m runs in the hall. The building is be covered with a gable roof with a pitch of 5 %. The modular spacing of the main trusses is 6 m. The superstructure consists of truss girders, full-wall columns, bracings and full-wall purlins. The RFEM program was used to determine the internal forces on the individual structural elements.
|
|
|
Design of a technological structure with use of BIM methodology
Brodecká, Denisa ; Bukovská, Pavla (referee) ; Vild, Martin (advisor)
Diploma thesis deals with the design of load-bearing steel structure for hot vapor air cooler. Part of this diploma thesis is also modal analysis of the construction and subsequent inspection of eigenmodes for eigen frequencies close to frequencies of the ventilator, to assess the resonance. The thesis contains of the design and check of structure elements in the computational software, including hand-done static calculation of chosen elements. Five joints are solved using Idea Statica and five hand-done checks of sub-connections, including design and solution of foundation pad. Next part of the outcome of this thesis is creation of digital construction model, including drawings. The Tekla Structures software was used to create DiMS.
|
|
|
Industrial hall
Forman, Radek ; Buchta, Stanislav (referee) ; Bajer, Miroslav (advisor)
Two-bay hall for warehouse and manufacturing purposes with supporting steel structure and thermally insulating sheating with width of 36 metres and lenght of 72 metres. The hall incorporates two overhead cranes with maximum load of 32 and 40 tonnes. The main supporting structure is a system of plate girders and beams. The beams are connected with hinges and are placed with intervals of 6 metres. The hall design is intended for 1st snowing area
|
|
|
Adaptation and modification of the industry hall
Benda, Lukáš ; Hejl, Jaroslav (referee) ; Klusáček, Ladislav (advisor)
The master’s thesis is focused on a design of reinforced concrete refabricated skeleton of the industrial hall. Object of the design are two internal traverse frames of the hall which consists of reinforced concrete truss, columns, girder and concrete flat foundation. Thesis includes working-out of static calculation, elaboration drawings of shape, reinforcement of solved elements and evolvement of assembly drawings. The rest of the project parts are not analyzed.
|
|
|
Multibay industrial hall
Hrabovská, Kristýna ; Pešek, Ondřej (referee) ; Horáček, Martin (advisor)
The principal aim of this thesis is to design two possible options for the steel structure of a new multibay industrial hall located in Slavkov u Brna. An overhead crane with load capacity of 12.5 metric tons will by situated in one of the bays. The hall has a rectangular shape with dimensions of 63x48 meters, each of the two bays has dimensions of 63x24 meters, a height of 11.5 meters and a saddle roof with an angle of slope 10°. Both of the options have the same layout design, the only difference is that option 1 has columns with truss girders while option 2 has a transversal frame with a haunch. The first option was selected because it is more economical due to material savings and is design developed in a greater detail. The permanent load on the building is considered and includes the weight of the steel structure, panels and the weight of crane runway. The variable load is also considered due to the live load, snow load, wind load, the crane, and their combination. Steel S235 is used as the construction material.
|
|
|
Prefabricated reinforced concrete hall
Jakubcová, Hana ; Hrubý, Tomáš (referee) ; Požár, Michal (advisor)
The main work of the diploma thesis is a draft and a static judgement of chosen horizontal and vertical parts of prefab hall with a crane runway. The chosen parts are the girder, the column, the bracing, the foundation beam, and the foundation pad. The model for gathering of intern forces is made by the program SCIA Engineer 18.1 with the use of a bar 3D model of the whole project. The parts were judged on the ultimate limit state. The prestressed girder was judged on the ultimate limit state and the serviceability limit state.
|
|
|
Steel production hall
Vystavěl, Vojtěch ; Balázs, Ivan (referee) ; Pešek, Ondřej (advisor)
This thesis deals with a design of steel construction of two-aisle industrial hall. The construction will be situated in Brodek u Prostějova, near exit from D46 highway. Horizontal dimensions will be circa 36 to 36 metres, clear height from floor to overhead crane about 9.5 metres.
|
|
|
Structural design of the testing centre
Růžička, Martin ; Pinkas, Karel (referee) ; Klusáček, Ladislav (advisor)
The master´s thesis concerns with the design of the construction of the testing centre. The hall is divided in two parts, in one of those parts the office rooms are located. The precast concrete frame of the hall is composed by foundation pads, columns, secondary beams and crane beams, precast slabs, and prestressed girders. The thesis contains report, structural design, drawings of floor plans and sections, drawings of formwork and reinforcement, visualization and steps of construction.
|
|
|
Steel industrial hall with crane rail
Holec, Tomáš ; Melcher, Jindřich (referee) ; Karmazínová, Marcela (advisor)
The bachelor thesis contains a design of one-aisle industrial steel hall with span 30 m, length 82 m and height of the holder of a crane track girder 7,5 m. In the hall there is an overhead crane with load capacity of 20 tons. The main structural material is steel S 355. It is processed several versions and one is processed in details. Drawings contain the platform and section of the hall and manufacturing drawings of the truss.
|
guest ::
