|
|
The utilization of atomic force microscopy for study on hydrogels
Lišková, Kateřina ; Kalina, Michal (referee) ; Smilek, Jiří (advisor)
The presented bachelor thesis deals with the study of atomic force microscopy (AFM), especially the optimization of the measuring procedure for imaging the surface of variously crosslinked hydrogels in the hydrated state. The most attention was given to the physically crosslinked polysaccharide hydrogel (termoreversible agarose) in hydrated state, where the surface of the samples with mass concentration of 4, 2, 1, 0,75 and 0,5 % was measured. Subsequently, the surface of the ionically crosslinked 2 % alginate gel with calcium ions was measured. Based on a literature research, measurements were performed in water using the method of quantitative imaging (QITM Advanced Imaging), which is especially suitable for soft samples with uneven surfaces. Multiple cantilever were tested for measurement, finally the SNL-10 cantilever was selected, which showed versatility for imaging samples in any measuring environment, especially aqueous. The pore sizes of the agarose hydrogels were monitored by image analysis ImageJ. For the measurement of hydrogels in the swollen state, the procedure of measuring their surface using atomic force microscopy has been optimized, but for different types of hydrogels, individual optimization of both preparation and instrument setup will be required.
|
|
|
Transport processes in hydrogels
Sárová, Michaela ; Kalina, Michal (referee) ; Klučáková, Martina (advisor)
This master's thesis is focused on study of transport processes in hydrogels based on humic acids. For this purpose is used methods unsteady diffusion in cuvettes, which was studied the transport of organic dyes, specifically methylene blue and rhodamine 6G, in agarose hydrogel without the addition and with the addition of individual standards humic acids (Leonardite, Elliott Soil, Suwannee River II and Pahokee Peat). This method is based on spectrophotometric monitoring of concentration changes of dyes depending on space of the cuvette and on time. The aim of this thesis was to investigate the effects of interactions between diffusing dye and the particular type of gel to the resultant effective diffusion coefficient of dye. The experiments indicate that the presence of humic acid in the hydrogel greatly affects the transport of selected dyes.
|
|
|
Preparation, characterization and evaluation of application potential of semiIPN hydrogels
Papežíková, Hana ; Pekař, Miloslav (referee) ; Sedláček, Petr (advisor)
Aim of this thesis os to optimize set up of hydrogel based on semi-interpenetrated polymer networks. Polyhydroxyethylmethyl acrylate was chosen as an model example of hydrogel due to its common use in biomedicine. At first, thermoiniciation was used for preparation and changed to photoiniciation afterwards. Following the optimisation of the hydrogel set up with proper qualities, the polyelectrolyte sodium polystyrene sulfonate was implanted. Object of research was its impact on structure, flowing and transport features of hydrogels. All qualities were tested by drying, rheology, and fluorescence correlation spectroscopy. Results clearly validate influence of hydrogel features by polyelectrolytes.
|
|
|
Optimalization of techniques of microrheology for characterization of biopolymer hydrogels
Dušenková, Alica ; Smilek, Jiří (referee) ; Sedláček, Petr (advisor)
The main aim of the bachelor thesis is optimalization of microrheological techniques for characterization of biopolymer hydrogels. Hydrogels, based on thermoreversible biopolymer agarose, were selected for these experiments. The influence of incorporated poly(sodium 4-styrenesulfonate) on structure and viscoelastic properties of agarose hydrogels was investigated through diffusion coefficient and MSD curves. Microrheological properties were studied by fluorescence correlation spectroscopy, by using fluorescent beads, which were embedded in hydrogel systems.
|
|
|
Preparation of humic hydrogels for appliaction in cosmetics
Pavlicová, Renata ; Mravec, Filip (referee) ; Sedláček, Petr (advisor)
This bachelor´s thesis is focused on the preparation and characterization of hydrogels containing humic substances and assessment of their potential usefulness in cosmetic practice. Main objective of the work was to develop a literature review focusing on the potential use of humic substances in the cosmetics and pharmaceutical industries. Furthermore, the aim was to prepare model hydrogels addition of soluble humic substances in traditional cosmetic compositions and their characterization by basic methods of analysis parameters. The main investigated parameters were consistency resulting gels (assessed subjectively and subsequently by rheology), their internal pH and dry matter. The experimental results showed that incorporation of humic substances into hydrogels resulting gels acceptable characteristics for further use in cosmetic applications.
|
|
|
Study of degradation of biocompatible copolymers
Oborná, Jana ; Čáslavský, Josef (referee) ; Vávrová, Milada (advisor)
This diploma thesis is focused on biocompatible polymers degradation study. Copolymers were studied based on poly(lactic-co-glycolic) acid and poly(ethylene glycol) PLGA-PEG-PLGA and further these copolymers modified with itaconic acid ITA-PLGA-PEG-PLGA-ITA. This paper investigated the influence of pH phosphate solution on the degradation of polymers. Degradation of polymers occurred at 37 °C in phosphate solution with pH 4.2, 7.4 and 9.2. High performance liquid chromatography with UV-VIS detection of diode-array type was used for quantitative determination of lactic acid and glycolic acid as the final degradation products. For qualitative identification of additional degradation products were used tandem connection liquid chromatography and mass spectrometry. Gel permeation chromatography with refractive index detector was used to determine the molecular weight decrease polymer chain after the degradation.
|
|
|
Study on Sol-gel Process of Agarose by Classical Rheology and Dynamic Light Scattering
Krňávková, Šárka ; Hnyluchová, Zuzana (referee) ; Smilek, Jiří (advisor)
The main aim of the bachelor thesis was characterization of hydrogels from rheological point of view and by dynamic light scattering. Rheological part of research relates with the determination of the influence of temperature on mechanical properties, gelation temperature and temperature of solidification as well as the effect of aging on mechanical properties of hydrogel. The influence of the particle size on diffusion coefficient was investigated by scattering techniques. The positive correlation between the data obtained by both types of measurement and the potencial usage of dynamic light scattering method for the characterization of hydrogels was discussed as well.
|
|
|
Viscoelastic properties of hydrogels depending on relative humidity
Kouřilová, Ludmila ; Heger, Richard (referee) ; Smilek, Jiří (advisor)
This bachelor thesis is mainly aimed on the determination of the dependence of the viscoelastic properties of physically crosslinked hydrogels on the relative humidity controlled by humidity cell (as an accessory to a rotary rheometer), or the desiccator with the drying medium. The main objective was to optimise the methodology of the humidity cell for the rheological determination of the viscoelastic properties of hydrogel materials as a function of relative humidity and to verify experimental setup on the agarose hydrogel. The results showed that the agarose hydrogel gradually loses its dispersion medium after exposure to chosen relative humidity, resulting in a loss of contact between the upper rheometer sensor and the sample when measured with the standard measurement gap control setting, which is constant during the measurement. The setting of the control of normal force proved to be an appropriate solution, which has led to a gradual reduction in the height of the upper rheometer sensor in an attempt to keep the normal force at the desired level during the drying of the hydrogel. A humidity cell proves to be an appropriate method for determining the dependence of the viscoelastic properties of hydrogels on relative humidity. Unlike the use of a desiccator with drying medium, the drying of the hydrogel sample does not result in such rapid drying that it breaks the texture on its surface. Another advantage of a humidity cell is the ability to maintain the desired relative humidity value even if the gel begins to release dispersion medium into its surroundings, which was not possible with a desiccator with drying medium.
|
|
|
Study on Interconnection between Structure and Rheological Properties of Hydrogels on Macro and Microscopic Level
Lepíková, Jana ; Klučáková, Martina (referee) ; Kalina, Michal (advisor)
Diploma thesis main goal is to obtain new pieces of knowledge about relationship between hydrogel structures and its flow and transport properties. Thesis is mainly focusing on combining pertinent biopolymers into model hydrogels based on agarose. Then perform correlation of results obtained by diffusion methods, and by rheologic measurements on macroscopic and microscopic level. Properties of hydrogels were measured by selected rheologic measurements, dynamic light scattering method, and correlative fluorescence spectroscopy. From these methods various parameters (MSD modules, values of complex viscosity) were obtained. Afterwards transport properties of prepared hydrogels were studied by observing Rhodamine 6G diffusion. Here two different approaches were used. From macroscopic perspective, simple principles of mass diffusion from dye solution to cuvettes filled with hydrogels containing individual biopolymers were used. From microscopic perspective, dye was added during the sample preparation and then the mass diffusion was investigated using FCS. Based on evaluated results it was discovered that added biopolymers don’t influence properties of carrier medium, in this case agarose hydrogels. During the study of prepared hydrogels’ reactivity and barrier properties some differences were observed. Charge of biopolymer and its charge density were discovered as main factors influencing transport of charged solutes into prepared hydrogels.
|
|
|
Phase separation in the system of aminoclay-biopolymer
Plotěná, Michaela ; Pekař, Miloslav (referee) ; Mravec, Filip (advisor)
The aim of this diploma thesis was to study the structure and to evaluate the properties of the hydrogel prepared by the interaction of the aminolclay with the biopolymer. Representatives of the biopolymers were selected from low to medium molecular weight sodium hyaluronate and sodium polystyrenesulfonate. On the basis of the experiments carried out, it was found that phase separation takes place only when the aminolclay interacts with medium molecular weight hyaluronan (MMW). In the experimental part, analyzes of this sample were carried out in order to determine the formation of phase-separated hydrogel by influencing the solution by ionic strength, investigation of hydrogel extinction in various organic solvents, stability of hydrogel under extreme temperature conditions, the effect of storage on its degradation, etc. Viscoelastic properties were experimentally proven by rheology and thermal analysis detected binding water. Inhibition of microorganisms was confirmed by antibacterial diffusion assays. All experiments were carried out for the use of the Aj-HyA hydrogel (MMW) in the field of medical applications, specifically for the modern method of wet wound healing of the skin.
|
guest ::
