|
|
Production of the electric motor cover
Havlíček, Lukáš ; Staněk, Vojtěch (referee) ; Podaný, Kamil (advisor)
The present thesis solves a design of electric motor cover; specifically it deals with manufacture of cover body. A drawing is of simple flange-free cylindrical shape made of deep-drawn 11 305 steel sheet. With respect to the given shape of the component, material and annual series of 25,000 pieces, the most suitable technology selected was the method of deep drawing without thinning the wall by means of conventional tools. The process of deep drawing will be performed using a single-acting deep drawing tool supplemented with technical documentation. This tool is designated for the hydraulic press ZH 40 with a total drawing force of 400 kN. In the technical-economic part, the price of one product (respecting the indirect costs) was calculated for 42 CZK.
|
|
|
Production single parts from sheet metal with usage technology deep drawing
Jurča, Jan ; Dvořák, Milan (referee) ; Žák, Ladislav (advisor)
JURČA Jan: The manufacturing of sheet metal part by deep draw technology. Thesis of Master´s Studies, the 5th Year of Study, the School-year 2008/2009, The Institute of Manufacturing Technology, Department of Machining, FSI VUT Brno.The thesis deals with the project of manufacturing the part of the car body – the fifth door by deep draw technology. The material is zinc-coated sheet metal HX220YD EN 10292. Mechanical properties and suitability of the material are evaluated by mechanical tests. The structure of the material is evaluated by metalography scratch pattern. The analysis of draw process and manufacturability of the part is made by calculations and AutoForm software. The production line, necessary machinery and construction solution of draw tool for the manufacturing the part are determined. Last section deals with economical evaluation of the production.
|
|
|
Manufacturing of oil filter
Prokop, Karel ; Humlíček, Jaroslav (referee) ; Podaný, Kamil (advisor)
This thesis deals with the proposal of an oil filter body manufacture. The oil filter body is a rotational part made of DC02 deep drawing steel. With respect to the material, geometry and the size of the production, a deep drawing technology which does not consider wall thinning, was chosen. It was decided about necessity of five drawing operations. Suitable presses for a notching line and the very drawing were selected. Next part of the thesis is given to the design of the rolling tool construction. A drawing die for the first operation is described in details, including the controls and drawings. The economic part compares variants with the requirements of monthly production of 50 000, 180 000 and 350 000 pieces respectively. Due to the economic study, the production of 180 000 pieces per month was chosen.
|
|
|
Technology of production cover by forming
Hansen, Petra ; Štroner, Marek (referee) ; Dvořák, Milan (advisor)
Master´s thesis project elaborated within the scope of Master´s degree submits a proposal of manufacture technologies for complicated components with the transition of an elliptical shell into a rectangular shape. Material: Aluminium EN: AW-3003, thickness 2 mm. Estimated annual production: 80 000 pieces. Drawing tool with blankholder was designed based on calculations and literature study of deep drawing. The drawing operation is performed by a hydraulic press ZH 50 with a rated power of 500 kN. The drawing tools are made from tool steel 1.2379 (19 573). Proposal of suitable technologies respectively drawing proces was verified by simulation program FormingSuite and PAM-STAMP.
|
|
|
Production single parts from sheet metal
Hrnčál, Zdeněk ; Dvořák, Milan (referee) ; Žák, Ladislav (advisor)
Project elaborate in terms of engineering studies branch 2303T002 submits proposal technology of production single parts from deep drawing press steel metal plate 11 305.21. On the basis literary study problems blanking, deep drawing and calculations was designed drawing in instrument with holder, to extrusion components serves lower ejector. Combination tool is set on hydraulic press CTH 250 with nominal tensile by force 250 kN. Drawable tools (drawing punch, drawing die) and shear pin tools (blanking punch, blanking die) are made from instrumental steels 19 436.3, heat treated condition to drawing documentation.
|
|
|
The Production of the oil pan
Šupa, Jan ; Žák, Ladislav (referee) ; Císařová, Michaela (advisor)
The dissertation deals with a suggestion of the production of an oil pan into the car with a deep drawing. The part will be produced out of a deep drawed steel plate – class 11 305 (DC04). On the basis of a calculation and the study of the corresponding literature about the deep drawing a reverse drawing in a convention tools with a blank holder has been suggested. The part of the machine will be also an upper ejector for the fall of a sticking of a drawn part in the die. As a semi-product a blank has been chosen, which is burned out from the piece of plate with the dimension of 2500 x 12500 mm and thickness 1 mm with the help of the laser. The production quantity is 30 000 per one year. As a forming machine a universal hydraulic presser CTH 250 from the Czech company Žďas a.s. with the nominal power 2500 kN has been chosen.
|
|
|
Tests metal sheet in the engineering practice
Ivančo, Radek ; Štroner, Marek (referee) ; Dvořák, Milan (advisor)
The thesis presents the theoretical summary of tests metal sheets, which are used in industrial practice. Based on the literature study of cold metal forming was performed Erichsen test which tested body sheets DC06 + ZE, CR340LA + GI / GA50-U, CR300LA + GI / GA50-U. From the test result showed that all sheets are suitable for forming, as indicated by the supplier. It was designed product for testing thin sheets.
|
|
|
The suggestion of technology of protection cover
Vágner, Vladislav ; Šlais, Miroslav (referee) ; Podaný, Kamil (advisor)
he project executed in frame of Bachelor study presents a suggestion of manufacturing technology of cover made of deep drawing sheet iron DC 04. The theses includes comparing of possible manufacturing technologies and elaboration of manufacturing procedure by deep drawing. Based on calculation was discovered that there are four drawing and one calibrating operations needed. The CTC 250 press was chosen and for it was the tool designed for a first draw. In the theses was included economical-technical evaluation which shows that set of 50 000 pieces a year is profitable.
|
|
|
Technology of production form - parts by forming
Bezděk, Jiří ; Císařová, Michaela (referee) ; Dvořák, Milan (advisor)
Graduation theses project elaborated within the scope of full-time study with specialization 23037002 submits the proposal of manufacture technologies for irrregularly formed component with flange by surface forming. Material is made from rust-resistant metal plate 17240 with 1mm thickness. Expected annual serie is 50.000pcs. Based on literary pilot project for deep hauling dilemma and its calculations was proposed hauling in instrument with blankholder. The hauling operation is done using hydraulic presser ZH 50 with rated power of 500kN. The drawing instruments are made from tool steel 19573 and heat treated according design doccumentation. The proposal of drawing versions was verified by simulation program Pam-Stamp.
|
|
|
Manufacturing of the part "shaker" by cold sheet metal forming
Pekař, Pavel ; Císařová, Michaela (referee) ; Jopek, Miroslav (advisor)
The project elaborated design of technology production of the extract from the stainless deep drawing sheet 0,3 mm steel 17 240. Pursuant to of the literary pursuit a problem of the sheering and deep drawing was designed sheering and drawing with blank holder in combined tool. The tool is solved like customary rack with guiding rods clamped on the hydraulic press for forming of sheet PO 100 with nominal forming force 1 000 kN. Shearing die, drawing die and drawing punch are produced from tool steel 19 436.9 heat-worked according to drawing documentation.
|
guest ::
