|
|
Utilisation of waste heat potential in the flue gas
Palyza, Vojtěch ; Tomáš,, Zdeněk (referee) ; Baláš, Marek (advisor)
The purpose of this thesis is to propose a conceptual design of flue gas condenser and its application into a heating plant. The theoretical part contains of necessary knowledge important for understanding the issues raised in the thesis. The conclusion of this thesis is comparison of different types of flue gas condensers, low temperature economizer and absorption heat pump followed by economic evaluation using this technology in the heating plant.
|
|
|
Smart District Špitalka
Pelčák, Vlastimil ; Hybská, Bohumila (referee) ; Sedláček, Michal (advisor)
This thesis deals with an architectural case study of the urban block in the Svitava industrial zone bordered by the Svitava River in the east, Ring Road in the west, Milady Horákové Street in the north and Zvonařka Street in the south. Špitálka Smart City has been designed to be in this area. The thesis is modelled on the Špitálka Smart City urban study, that was the outcome of the pre-thesis seminar in the winter term 2020/21. The urban study objective was the urban renewal of the Brno teplárny (heating plant) area and its surroundings as well as a design of a new urban boulevard. The thesis focuses on a design of a selected urban block in the Smart City Špitálka. This mixed-use development provides commercial, administrative and residential functions. The block is divided into two parts; either part consists of three sections. Two underground storeys providing parking space and space for building services are intended for the whole block. The case study further develops only the section that is labeled Coworking offering six floors for coworking spaces. On the ground floor there are spaces for a café, commerce and also the main entry to the co-working offices. A sky-office and a venue for rent are located on the seventh floor. The venue can be used for a wide range of events from smaller conferences, through corporate meetings & teambuildings to private parties. Both the sky-office and the venue have access to the rooftop terrace. The design creates a modern office building concept in the former industrial zone.
|
|
|
Smart District Špitalka
Juchelka, Tomáš ; Hybská, Bohumila (referee) ; Sedláček, Michal (advisor)
This thesis deals with an architectural case study of the city block in the Svitava industrial zone bordered by the Svitava river in the east, Ring road in the west, Milady Horákové street in the north and Zvonařka street in the south. Špitálka Smart City is located right in the centre of this area. The thesis is modeled on the Špitálka Smart City urban study, that was the outcome of the pre-thesis seminar in the winter term 2020/21. The urban study objective was the urban renewal of the Brno teplárny (heating plant) area and its surroundings as well as a design of a new urban boulevard. To effectively use the place a residential building with commercial spaces on the groundfloor has been designed. The building consists of four sections, which share two underground storeys providing parking space and space for building services. The case study further develops only the section that is labeled A in the study. Section A offers 23 housing units and a café. The design aims at high quality housing with a view of the city replacing the former industrial zone.
|
|
|
Operational and Economical Assessment of New Turbine Installation
Čech, Jan ; Hejda, Lukáš (referee) ; Luňáček, Jiří (advisor)
This diploma thesis deals with the operational and economic assessment of the installation of new TG3 turbines in the Přerov Heating Plant. The beginning of this thesis deals with a brief theoretical introduction of this investment and describes the classical economic evaluation methods and the Monte Carlo method. Subsequently, the investment project was analyzed and inputs for the economic model were created. The economic model was then evaluated using classical methods and Monte Carlo methods, the results are then compared with each other. Based on the results of the economic evaluation, the most efficient variant of the Přerov Heating Plant technology was chosen.
|
|
|
Type design and flowchart of a steam turbine for a specific location
Kalina, Leoš ; Pospíšil, Jiří (referee) ; Škorpík, Jiří (advisor)
This master's thesis is deals with type designing and implementing the steam turbine to the machine part of heat plant in reconstruction. The thesis consists of two parts. First part is theoretical explanation of the heating industry, steam turbines, thermal cycles and components of thermal power plants. Second part of the thesis describes the design and calculation of thermal diagrams based on turbine parameters, which were provided from Tenza, a.s. tender. There is a simplified calculation of technical-economic study in the conclusion of the thesis. The thesis output is recommendation of single final implementation solution for customer.
|
|
|
Source for heat production in the Czech Republic
Macek, Robin ; Kracík, Petr (referee) ; Baláš, Marek (advisor)
This bachelor’s thesis deals with sources for heat production in the Czech Republic. The first part is a research part and is about used heating technology in our country. The second part is again research part and describes individually in more detail parts of the heat sources, as boils, turbines, heat exchangers a heat distribution. The next chapter compares advantages and disadvantages of central heat supply and local source of heat, first theoretically and then practically. The last part balances production of the heat and electricity from the point of view of the fuel used and the amount of production over the past 15 years.
|
|
|
Increasing the energy efficiency of industrial heating plant
Spišák, Lukáš ; Lisý, Martin (referee) ; Kracík, Petr (advisor)
This bachelor thesis consists of two parts. The introductory chapters are devoted to the basic description of cogeneration and trigeneration technologies, focusing on the description of cogeneration units and cooling devices. The second part of the thesis compares two specific ways of using cogeneration units and gas boilers in the CHEMOSVIT ENERGOCHEM a.s. in the town Svit. Subsequently, both variants are evaluated energetically and economically.
|
|
|
Source for heat production in the Czech Republic
Bártová, Jana ; Kracík, Petr (referee) ; Baláš, Marek (advisor)
This bachelor thesis deals with thermal recources in the Czech Republic. The first part of the work is about the division and description of heating plants used for the production of thermal and electric energy. The second part of the thesis describes the advantages and disadvantages of district heating and individual heating. The last part of my work contains statistical processing of heat sources located in the Czech Republic.
|
|
|
Electric boiler connection in heat plant for providing ancillary services
Ditrych, Marek ; Příhoda, Martin (referee) ; Wasserbauer, Vojtěch (advisor)
The bachelor thesis deals with using the electric boiler for extension ancillary services in heating plant. The system and support services are described in the thesis, because the ancillary services regulate an energy deflection. The system and ancillary services are described in the thesis. Thanks to these services an energy deflection is regulated. The thesis describes different types of electric boilers and there functions. In the thesis is shown the possible solution of using an electric boiler in heating plant Opatovice. The cable conduction is designed for a power of electric boiler. For this reason, there is calculated the equivalent warming short-circuit current close to the electric boiler.
|
|
|
Contactless level measurement
Pribula, Wojciech ; Richter, Miloslav (referee) ; Petyovský, Petr (advisor)
The~thesis begins with an~analysis of~methods of~water level measurement in~high-pressure system. This~systems are placed in~heating plants and power plants and they work with the water whose temperature exceeds 300\,°C and whose pressure is above 10\,MPa. Thesis present method of~differential pressure with the~derivation of~the~correction element and also is~described capacitive method, especially Hydrastep system. This~work prepares theoretical foundation under creating algorithm for level detection using image recognition. Also it considers suitable hardware as~camera and light for illuminating and highlighting the~level. It~includes outline of~captured image editing and detection algorithm. The next part of thesis is dedicated algorithm itself. There are described classes and methods that are used for level detection or for debugging. Also, there are specified necessary modifications of watermark and requirements for watermarks surroundings thats are necessary for proper functioning of the algorithm.
|
guest ::
