|
Heating of flat house
Jára, Marek ; Vendlová, Lucie (referee) ; Topič, Jan (advisor)
The theme of this diploma thesis is to design heating of the flat house. The theoretical part of this diploma thesis is about exhaust gases paths. The calculation part of this diploma thesis contains the design of the heating system by panel heaters, floor convectors and underfloor heating system. The heat source is the system of cascade-connected gas condensing boilers. The rest of this part are the calculations of the preparation of hot water, design of hot water storage tank and another necessary equipment of the system. The part Project is about technical report and simulation of behaviour of underfloor heating system in various marginal conditions.
|
|
Design of a heating system for a new apartment building
Číková, Veronika ; Počinková, Marcela (referee) ; Vyhlídalová, Karolína (advisor)
The bachelor thesis deals with the design of a heating system of a new apartment building. The theoretical part deals with energy and heat sources. The calculation part includes a proposal for heating the new apartment building. It is a three-storey building with a basement and 17 apartments for a total of 46 people. Two condensing boilers are designed as a heat source and a storage heater for hot water preparation. Heating is provided by panel radiators.
|
|
Heating system of polyfunctional house
Hladík, Juraj ; Adam, Pavel (referee) ; Počinková, Marcela (advisor)
The aim of this bachelor thesis is the theoretical part of circulatory pumps. Computational part solves the design of heating and hot water heating in the polyfunctional house in Moste in Bratislava. Three-storey multifunctional house is situated on the outskirts of the city. It contains a total of 4 apartments and 8 office spaces for 64 people. The source of heat for the object is gas condensing boilers. The heating surfaces are plate radiators, tubular heating of the body.
|
|
Fittings of heating systems
Klus, Lukáš ; Adam, Pavel (referee) ; Počinková, Marcela (advisor)
The theme of this diploma thesis is fittings of heating systems and it is divided into three parts. The first part deals with this topic on theoretical level. In the second part, there is a calculations and drawings that deals with heating and water heating of the apartment building in Uherské Hradiště. This part is solved in two variants concerning hydraulic balancing and regulation of the heating system. The last part of the thesis is an experimental solution and processing of pressure loss results of selected valves. These results are compared with the values reported by the manufactures of the valve.
|
|
Environmentally advanced building of the municipal office in the city of Bojkovice
Šenkyřík, Adam ; Blasinski, Petr (referee) ; Rubinová, Olga (advisor)
The aim of the master thesis is to design nearly zero-energy building of the municipal office in the city of Bojkovice. In the first part an architectural and constructional solution was designed. The building has three above-ground floors. It has a flat green roof with skylights and photovoltaics. First floor includes reception, break room, archives, offices, meeting room, kitchenette, sanitary facilities and boiler room. Second floor consists of break room, archives, storerooms, offices and sanitary facilities. External load-bearing walls, internal load-bearing walls and partitions are made of ceramic blocks. Columns, girders, floor slabs and roof slabs are made of monolithic reinforced concrete. Cladding is insulated with ETICS. In the second part HVAC was designed. Heating is provided by gas condensing boiler. The building is mechanical ventilated by AC units situated in technical room in the third above-ground floor. Cooling is air-conditioned by fan-coil units designed in offices and conference hall, chillers are situated on the roof. The third part of the master thesis focused on design and comparison of various AC units. Drawings are processed in SW AutoCAD, calculations were made in Excel, the design of air-conditioning system and unit was made in SW Atrea DUPLEX 9.10, Aerocad and CLIMACAL.
|
|
Heating of the Polyfunctional Object
Slovák, Zdeněk ; Topič, Jan (referee) ; Vendlová, Lucie (advisor)
This thesis deals with the design of the heating system in a Polyfunctional building. The design is solving heating of a Polyfunctional Object in Kostelec nad Ohří. The building has basement and two floors. The building is heated by means of panel, tubular and floor convector heaters. The source of the heat is located in the boiler room in the basement.
|
|
Design of heating of primary school
Pánková, Pavlína ; Vyhlídalová, Karolína (referee) ; Horká, Lucie (advisor)
The goal of this master's thesis is to design the heating system for the existing building of an elementary School. The thesis is divided into three parts. In the first theoretical part, I discusses heat transfer methods, the influence of covers on heating elements, and the determination of radiant and convective power components. The second part solves the heating system's design in three heat source variants. The first option comprises six heat pumps. The second option includes a combination of direct evaporation for air handling units and heating using heat pumps. The third option involves the installation of gas condensing boilers. At the end of the second part, a technical report is written and drawing documentation is attached. The last third part is dedicated to the experimental measurement, in which the effect of the front plate on the performance of the heating element was ensured.
|
|
Heating of the Training Center
Matoulková, Jana ; Topič, Jan (referee) ; Vendlová, Lucie (advisor)
The aim of this thesis was to design heating a training center in the Velke Mezirici. The heat source was designed gas condensing boiler, which covers the requirements for the heating system and heater air handling unit with heat recovery. The heat source is located in the utility room on the first floor. The building was designed by panel radiators and convectors bench.
|
|
Heating of the Object with Different Fuels
Ladomérská, Jana ; Vendlová, Lucie (referee) ; Topič, Jan (advisor)
In my final thesis I am processing a proposal for heating and preparing hot water for a restaurant with accommodation. This is a three-storey brick house. It is situated on the territory of the Ústí region. The aim of my work is to propose and to assess the appropriate heat source for this object. In the object I chose heating radiators. The proposal is processed in two variants. In the first variant, I suggest a cascade of condensing boilers using as a source of heat. In the second variant, I suggest a cascade of electrical boilers. Hot water will be prepared in reservoir of warm water. The source of hot water will be the same as the source for heating.
|
|
Heating of Residential Building
Plšek, Michal ; Topič, Jan (referee) ; Počinková, Marcela (advisor)
The bachelor thesis deals with the design of heating and hot water heating in a new row house. The apartment building consists of four floors and a basement. The building is brick with a flat roof and is insulated. The bachelor thesis is divided into three parts. The first part focuses on solving the theoretical topic of heat distribution and measurement of heat in apartment buildings. The second calculation part solves the design of the heating system together with the design of hot water. The heating system is designed as a two-pipe hot-water system with two condensing boilers as the main heat source. The last project part contains the technical report and the corresponding drawing documentation.
|