|
|
Manufacturing of the Wall Bracket
Fridrich, Ladislav ; Jopek, Miroslav (referee) ; Řiháček, Jan (advisor)
The bachelor's thesis deals with a suitable design of production technology for a wall bracket, which will serve as a speaker positioning system. The part is made of non-alloy structural steel S 235JR with a thickness of 3 mm. The production series is set at 200,000 pieces per year. After evaluating the production possibilities, the technology of bending and progressive cutting is chosen, which are combined in a combined tool. Subsequently, the most suitable arrangement of the part on the sheet metal strip is selected and the sheet metal coil is selected as a semi-finished product for production. Furthermore, technological calculations are performed and drawing documentation of the tool is made. Based on the calculated values, the production machine Mecanica Exacta model CC250 from the company Formetal s.r.o.
|
|
|
Manufacturing of clamp
Svoboda, Petr ; Lidmila, Zdeněk (referee) ; Podaný, Kamil (advisor)
The bachelor thesis presents the modernization of the technological process of clamp manufacturing in the company FERRUM s.r.o. The part is used to connect the protective elements with the exit ladder. The component is made of 3 mm thick sheet metal. S235JR steel with subsequent hot-dip galvanizing as an anti-corrosion treatment was chosen as the starting material. Regarding to the size of a series of 1300 pieces per week, the shearing and bending technology in the combined tool was chosen from the production possibilities, where the part will be produced in three steps. In the first, holes for the screws are punched and the part is cut from the blank, the second step is free and serves for shift. In the third the part will be bended. A forming force of 618 kN will be required for production, which will take place on an eccentric press LEN 63 C, located in the company's machine park.
|
|
|
Manufacturing of the part "shaker" by cold sheet metal forming
Pekař, Pavel ; Císařová, Michaela (referee) ; Jopek, Miroslav (advisor)
The project elaborated design of technology production of the extract from the stainless deep drawing sheet 0,3 mm steel 17 240. Pursuant to of the literary pursuit a problem of the sheering and deep drawing was designed sheering and drawing with blank holder in combined tool. The tool is solved like customary rack with guiding rods clamped on the hydraulic press for forming of sheet PO 100 with nominal forming force 1 000 kN. Shearing die, drawing die and drawing punch are produced from tool steel 19 436.9 heat-worked according to drawing documentation.
|
|
|
Improvement of drilling technology of flange for a submersible electric motor
Veselský, Radim ; Kalivoda, Milan (referee) ; Jaroš, Aleš (advisor)
The goal of this bachelor’s thesis is introduction of existing drilling technology, assessment of existing technologies and design combined step–drilling tool. The first part of the bachelor’s thesis describes existing drilling technology, drilling tools and drilling machines. The second part of the bachelor’s thesis describes workpiece and existing technological process of its production. The last part of bachelor’s thesis consists of design of new step–drilling combined tool and its implementation to new technological process.
|
|
|
Manufacturing of the Mobile Phone Holder
Hřebíček, Robert ; Žák, Ladislav (referee) ; Peterková, Eva (advisor)
The master´s thesis is focused on the manufacture of mobile phone holder. The semi-finished productis a 1.5 mm thick steel sheetroll of S235JRG1. The annual seriesis set at 200,000 units per year. For the production of the part, the method of shearing and bending in a combined tool was chosen. Both technologies were dissected in a literary study, and a production process was developed to design a tool. A suitable production line was purchased for the entire production and the suitability of production was economicallye valuated.
|
|
|
Manufacturing technology design of the automotive door hinge
Dvořáková, Jana ; Císařová, Michaela (referee) ; Dvořák, Milan (advisor)
The bachelor thesis presents a production proposal of an automotive door hinge from the sheet metal ČSN 11 321 and an economic evaluation of the chosen variant. The hinge is produced in a combined tool by shearing and bending operations. The tool is clamped to a ZH 2500-2000 NG mechanical press with a nominal force of 2500 kN. Because of the press parameters, alternative solutions are proposed that could lead to an increased capacity utilization. Part of the thesis is a literary research, the output of this research is an overview of cutting technologies with evaluation of their suitability for production of the given part, theory of bending and stamping technologies, a brief outline of the possibility of component production by a method of additive manufacturing and theoretical calculations. Technical variants of series production tools are compared as part of the technical and economic evaluation. Drawing documentation of a component and of a tool are listed in the attachment.
|
|
|
Production of parts for window fittings
Havliš, Lukáš ; Špaček, Jindřich (referee) ; Žák, Ladislav (advisor)
This project submits a proposal for manufacturing technology of casement and frame window hardware base, made of 11343.23 steel 2,5 mm in thickness and with 15000 pieces annual production volume. The components form an integral part of a window hardware arrest mechanism. From potential variants of manufacturing, the technology of stamping and bending, with the use of a combined tool, was chosen. A bibliographic search examining these technologies was made and the machine LE 250 with nominal forming force 2 500kN was selected. The project comprises structural and technological calculations, including the combined tool design. In the economical part of the project, the product prices were quoted and the break-even point was determined. The break-even point is broken as soon as 13 046 pieces are manufactured.
|
|
|
Technology of production combinated cutting tools
Rusz, Radek ; Kalivoda, Milan (referee) ; Osička, Karel (advisor)
In the thesis is solved manufacturing technology of step drill from material of cemented carbide. At first is made review of existing shank cutting tool types, after that follows an analysis of cemented carbide tool material. In the next part of thesis is manufacturing technology of this tool, including review of grinding wheels, designed. Output of this work is procedure of program designing for manufacturing this tool in software Numroto. Next output is techno-economic evaluation of step hole manufacture with combined tool and comparison to conventional type of manufacture.
|
|
|
Production of handrail holder
Ryšavý, Jan ; Varjan, Matúš (referee) ; Peterková, Eva (advisor)
Economic and technological analysis of possible methods of production real part. The basic theoretical knowledge of selected production methods and their application in practice. The division of production methods for various production series of part using economic evaluation.
|
guest ::
