|
|
Proposal for the use of the Z 143 Lsi aircraft for aerobatic operation
Hub, Pavel ; Juračka, Jaroslav (referee) ; Píštěk, Antonín (advisor)
This master thesis deals with the impact of given construction changes on the Zlín Aircraft Z 143 Lsi aircraft, the purpose of which is to enable the aircraft to operate in the aerobatic category in accordance with FAR-23 certification guidelines. An important part of the thesis is the definition of permitted flight configurations with respect to the aircrafts´ structural strength limits and flight performance. Furthermore, impact of these changes on flight within the normal and utility categories is investigated. An overview of neccessary certification procedures is provided as well. The goal of the thesis is to supply the company with relevant technical documentation to decide on adequacy of the concept.
|
|
|
Aspect of reliability in compatibility evaluation of products
Šenkýř, Michal ; Kovář, Miroslav (referee) ; Koška, Petr (advisor)
The diploma thesis deals with stating the aspects of reliability in product compatibility evaluation, namely with stating result uncertainty in product parameters testing and diagnosis which are imperative for introduction of the product to the market. The practical part of the thesis focuses on stating selected uncertainty in warm-water boilers testing, especially in gas fueled boilers with rated thermal input of max. 70 kW.
|
|
|
Certification of flight simulator training devices according to EASA requirements
Dittel, Daniel ; Šplíchal, Miroslav (referee) ; Sklenář, Filip (advisor)
The aim of this bachelor thesis is to compile a flight simulator certification procedure according to EASA requirements. The thesis contains a basic division of simulators according to the requirements for simulation fidelity and deals with the certification process of a specific Boeing 737 MAX simulator, where the aim is to certify the simulator to the FNPT II/MCC level. The thesis analyzes the certification from a general point of view, as well as from the point of view of the requirements for the visual system and the sound system and also contains the requirements for the extension from the FNPT II level to the FNPT II/MCC level. The thesis also contains an overview of regulations according to which the certification of flight simulators is done. The thesis also contains a chapter where the possibilities of using the Boeing 737 MAX simulator of the FNPT II/MCC level are described.
|
|
|
CMMI Certification for Software Development in Agile Environment
Gajdušek, Radek ; Rychlý, Marek (referee) ; Kreslíková, Jitka (advisor)
The goal of master thesis "CMMI Certification for Software Development in Agile Environment" is CMMI quality model research with focus on software development in agile environment in the Siemens company. In the beginning CMMI model and Scrum methodics are introduced. The core of this thesis is focused on the current state analysis. Output of the analysis is a list of potential areas that are currently not compatible with quality model requirements. These areas are to be improved for the company to achieve the desired CMMI certification level. Possible improvements are introduced to the consultant. During the implementation part a web application is realized helping to remove most of the identified imperfections. Application benefit is objectively evaluated by an internal audit. The work includes discussion of possible further application development and quality model standard evolution in this company.
|
|
| |
|
|
Remotorization of the L60 aircraft
Sahrai, Daniel ; Bartoněk, Jaroslav (referee) ; Imriš, Pavel (advisor)
The subject of the diploma thesis is the replacement of the power unit to the Aero L-60 "Brigadýr" aircraft. The reason for such a conversion is the ending life of the original power unit, accumulating technical problems and the effort to achieve higher aircraft performance during normal operation. In the introduction, the aircraft is introduced and there are mentioned the results achieved in the selection of a suitable power unit during the previous work. Furthermore, the work briefly deals with the issue of certification and selection of a suitable method that will lead to the approval of the change and to maintain the airworthiness of the aircraft. The work also addresses the effects of reconstruction on the center of gravity of the aircraft, which are minimized by the appropriate design of the engine mount. The model of such a engine mount was created in the computer software CATIA V5 and subsequently a strength analysis of nine loading cases was performed on it. Furthermore, an analytical inspection of the engine bed tubes on the struts and a check of the strength of the bolts connecting the engine mount to the aircraft airframe were performed. At the end of this work is described the practical installation of the engine and engine mount, including other engine systems.
|
|
|
Test methodology for certification process of face product made from modified wood plastic composite (WPC)
Pokorná, Sofie ; Pospíšil,, Ladislav (referee) ; Vaněrek, Jan (advisor)
The bachelor’s thesis is focused on the description of testing methodology of facade gladding tile made from WPC modified by the fly ash addition. In the first part of the thesis, the properties and standard utilization of commercially produced WPC are specified, together with the material composition and their processing technology to final product. Withal, the basic information of the modifying admixture, that should improve the physical and mechanical characteristics of the designed gladding element, are provided. Following, the criteria, procedures and conditions are described for this component, that are required for granting the certificate of conformity, which allows the partial market. In the final section of the thesis, simple and clear table is developed, as an example of the default type tests.
|
|
|
Process performance improvement
Večeřa, Michal ; Musil, Martin (referee) ; Fiala, Alois (advisor)
This diploma thesis deals with preparation of quality management system for certification according to the standard ISO/TS 16949:2009. In the theoretical part of the thesis a various concepts of quality management system are described as well as certification process of ISO/TS 16949:2009. The last theoretical chapter is dedicated to the auditing of quality management system. The practical part is focused to the analyse of the current quality management system as well as performing of internal audits of quality management system. The last chapter is focused on evaluation of effectiveness of internal audits and realization of the first phase of certification audit according to the ISO/TS 16949:2009.
|
|
| |
|
|
Certifikation of Metrology Laboratory
Krbušková, Julie ; Fiedler, Petr (referee) ; Havlíková, Marie (advisor)
This bachelor’s thesis considers certification problems of Metrologic laboratory. Individual ISO standards (9000, 9001, 9004, 19011) needed for certification of companies are analysed in it. Also in this thesis there is elaborated manual of quality for Metrological laboratory of company Alfa. Further on I elaborate here schedule for calibration of devices in Excel with automatic monitoring of state and at last I check up management of Metrologic laboratory from the view of external auditor.
|
guest ::
