|
|
Cast-in-place tank of sewage plant
Kustyánová, Orsolya ; Šiška, Radek (referee) ; Strnad, Jiří (advisor)
This thesis deals with the design and assessment of all supporting parts of a cast-in-place reinforced concrete tank of sewage plant in the village Vrbice. Tha main parts of the thesis are the technical report, static analysis, drawing documentations, construction process and visualisations. Calculation of internal forces was performed by the software Scia Engineer and verified by manual calculation. The drawing documentation constists of shape and reinforcement drawings of supporting parts.
|
|
|
Load bearing RC structure of the multiple dwelling
Janisch, Filip ; Perla, Jan (referee) ; Šimůnek, Petr (advisor)
The project deals with the lower part of the construction of a residential building. The parking spaces are situated in three underground floors. The five floors occur in the over-ground part of the building. The building is based on the secant walls of Milan around the perimeter. Internal walls and columns are supported with micropiles. In this project are designed base plate, external walls and stairs. Static system and the calculation of the internal forces was carried out in Scia Engineer 2012 Student version.
|
|
|
Multi-storey building
Jetonický, Pavel ; Puchner, Josef (referee) ; Sýkora, Karel (advisor)
The subject of the master´s thesis is the design and assessment of the static load-bearing steel structure office building. It is an eight-storey building with a floor plan and dimensions 54x15m. The proposal has three variants. In one of them a steel frame with a hinge attached elements. These are the pillars, beams, trusses, joists and purlins, which are coupled with trapeze plate and thereby secure the stability of the position in the horizontal direction. The steel structure is placed between the reinforced concrete towers.
|
|
|
Technical inspection station
Smolík, Jindřich ; Moravcová, Eva (referee) ; Matějka, Libor (advisor)
This thesis deals with a new building technical control station, office space and hotel. The building is situated on three floors, on the first floor we find technical inspection station and office premises manual technical lines. On the second floor there are offices. On the third there is a hotel. The building is designed by a rectangular shape with a flat roof and on the third floor there is a trafficable terrace. The supporting structure consists masonry Porotherm and reinforced concrete system columns, which is found only on the first floor. The supporting structure of tensioned ceiling consists of prestressed beams ceilings Spiroll a concrete slab. External surface finish on the first floor is made up of silicate plaster paste and the remaining two floors are made of ventilated facades. Utility room is located on the first floor, from where a chimney Schiedel is build. Most of the floor space in the building are made of a carpet or tiles, only in the service line is epoxy coating
|
|
|
Design of residential house
Moravcová, Eva ; Loudil, Lukáš (referee) ; Zich, Miloš (advisor)
This is a residential house in Brno. The supporting structure is reinforced concrete. The building has one basement and six floors. Vertical load-bearing structures are made up of reinforced concrete columns and walls. Horizontal load-bearing structures are formed by slabs (bearing in both directions). The staircase is concrete slab. Foundation is on piles. Infill vertical structures are brick. In the fifth floor pool is located.
|
|
|
Sewage pumping station
Kustyánová, Orsolya ; Šulák, Pavel (referee) ; Strnad, Jiří (advisor)
This thesis deals with the design and assessment of all supporting parts of a reinforced concrete sewage pumping station in the village Vrbice u Velkých Pavlovic. The main parts of the thesis are the technical report, static analysis, drawing documentations and visualisations. Calculation of internal forces was performed by the software Scia Engineer and verified by manual calculation. The drawing documentation consists of shape and reinforcement drawings of supporting parts.
|
|
|
SUBSTRUCTURE OF A POLYFUNCTIONAL BUILDING ČESKÁ SKALICE
Výborný, Václav ; Špinar, Petr (referee) ; Kantová, Radka (advisor)
The main contents of the thesis is solving a construction-technological project substructure of a polyfunctional building Česká Skalice. Substructure is based on two height levels on bored piles. The first height level is called SECTION A, the second height level is called SECTION B. The base structure consists an angled base plate, which consists from two horizontal plates shifted against each other about one floor and between plates is a basement wall. The base plate in SECTION A is solved together with ceiling plate 1. PP. Further there is solved structures for two lift shafts . The thesis includes a technical report, technologic instructions, plan of building site, selected constructional details, cost estimate, schedule, machinery composition, control and testing plans, safety at work and environmental protection.
|
|
|
Detached family house with design studio
Dufek, Tomáš ; Žižka, Lukáš (referee) ; Vajkay, František (advisor)
The project addresses the new family house with design studio. It also dealt a double garage and parking for design studio. The building is designed in steep terrain. The building is designed Porotherm (masonry+ insulation system, ceilings). Roofing, flat roof construction. Thermal transmittance conform to the recommended values according to.
|
|
|
Cast-in-place underground pumping station
Tejkal, David ; Zich, Miloš (referee) ; Strnad, Jiří (advisor)
The aim of this work was to design a monolithic gas station. Construction was divided to 3 stages: base plate concreting, wall of the tank and slab. All these parts are connected together. Design was centered on all of these parts and problems during concreting and using were solved too. It also includes drawings.
|
|
|
Reinforced concrete aeration tank
Vlach, Jakub ; Strnad, Jiří (referee) ; Šulák, Pavel (advisor)
The aim of this work is to design and static analysis features open embedded aeration tank wastewater treatment plants, in particular the assessment base plate and exterior walls. On the basis of reports is prepared drawings consisting of reinforcement drawings and drawing shapes. The proposal was made on the values of the internal forces of the outputs of computer program SCIA Engineer 2012-Student Edition.
|
guest ::
