|
|
Multi-functional Building
Pečinka, Ondřej ; Sláma, Ludvík (referee) ; Mohelníková, Jitka (advisor)
The aim of the thesis is processing of project doccumentation for execution of mixed use building. The building will be situated in Bystřice nad Pernštejnem, in the Lužánky street.The building will be divided into two doctor´s surgeries, offices and three dwelling units. The building is designed as a detached house without cellar and with three above ground floors. Residential part consists of three dwelling units 2+kk, 3+kk and 4+1. Part of the residential unit is also a space for storage of bicycles in the first floor. Non residential space contatins a place for doctor´s surgeries and administrative part consists of offices, conference rooms, storages and toilets. Main enterances to the building are located in the fist above floor. There are 22 parking places and 2 parking places for the handicapped people. The building is based on concrete strip foundation. External loadbearing structures are from clay masonry. Floor structure is made of prestressed concrete floor slab. There is a warm flat roof, there arecast-in-place reinforced concrete staircase. While the elaboration I placed a great emphasis on a propriate layout design, technical and architectural design and a safe using of the bulidng. Drawing is done in AutoCAD programme.
|
|
|
Static analysis of bridge construction: Černý most in Hodonín
Okánik, Michal ; Kala, Jiří (referee) ; Sobek, Jakub (advisor)
The diploma thesis deals with static analysis of the Black bridge in Hodonín city. The creation of the numerical model in ANSYS sw. is described according to the existing project documentation, followed by the application of loading and boundary conditions (including the solution of foundation soil placed on the piles). The selection of the loading is used according ČSN EN standards for analysis and verification of the main construction parts. This work also includes verification of the piles deformations calculated both in ANSYS sw. and by the direct stiffness method (MS Excel is used) and their comparison is done. Amongst other attachments, the verification of the load carrying capacity of the structure (respecting the current traffic limitation allowing only one vehicle to be on the bridge structure) is also provided.
|
|
| |
|
|
Study of the plan of common facilities in the cadastral area of Zálesí u Bítova
Hanuliak, Radek ; PhD, Ing František Pavlík, (referee) ; Dumbrovský, Miroslav (advisor)
The aim of the diploma thesis was the study of common facilities in the town of Zálesí u Bítova. A comprehensive land consolidation was carried out with assessment of the network of field roads, erosion ratios, drainage rates and environmental protection elements. Measures for land access, erosion measures for the protection of the natural soil fund, water management measures and measures to protect and create the environment have been proposed in the area. An analysis of the current state of the territory and the subsequent design of the measures was carried out using DMT using ArcMap, AutoCad, DesQ, USLE 2D, LS convertor.
|
|
|
Static analysis and optimization of stress and deflection state of a lifting device
Okánik, Michal ; Vlk, Zbyněk (referee) ; Nevařil, Aleš (advisor)
The topic of this bachelor thesis is proposal and assessment of a lifting device according to current documentation and a new design of its construction and material solution. In the introductory chapter are described the features and requirements on a lifting device. In next chapter we deal with material solution of the problem. In the remaining parts of work, we focused on design of a beam model and detailed design of the plate joints using programs ANSYS and AUTOCAD, their subsequent calculation and assessment using the finite element method (FEM).
|
|
| |
|
|
Assembly Design of Ball-Joint Test Bench Hydraulic Unit
Novák, Jiří ; Beran, Martin (referee) ; Ramík, Pavel (advisor)
The main object of this thesis is the proposal of fitting (setting) hydraulic cylinder into test equipment of ball-joints of company TRW-DAS Dačice a.s. The thesis includes a short review about testing ball-joint of above company and about liquid mechanisms. Also, there are analyzed demands for fitting (setting) hydraulic cylinder into testing equipment. In the main part of this thesis there is described my own constructive proposal with numeric calculations in proper software. In enclosure there are all analytical calculations with productive drawings and an assembly drawing.
|
|
| |
|
|
3D model of selected object
Majerčíková, Radka ; Viktorová, Stanislava (referee) ; Bartoněk, Dalibor (advisor)
The subject of the thesis is to create a 3D model and technical report of Letohrádek Mitrovských in Brno. I started with the history, location and description of this object. Other part of my work is focused on making of 3D model. I have made two different models in two different programs. The main spatial model has been made in program AutoCAD and additional model in program 123DCatch. Thesis will be provided for usage in the future for the administrator of object Letohrádek Mitrovských in Brno.
|
|
|
Kindergarten
Lekeš, David ; Donaťák, Vladislav (referee) ; Donaťáková, Dagmar (advisor)
The main aim of this thesis is to create a Project documentation of the design of the New development, kindergarten, in the cadastral area Dejvice, Prague. The object is designed as a standalone barrier-free single-storey building. Kindergarten consists of two departments with a capacity of 48 pupils and adjacent facilities. The object is based on foundation pads and ground table. All masonry constructions are lime-sand blocks Kalksandstein. The facade is complemented by thermal isolation and the exterior staircase is monolithic and reinforced concrete. The object has a flat roof where an air conditioning unit is placed. The drawing is processed via AutoCAD software and visuals are created in program Sketchup.
|
guest ::
