|
| |
|
|
Model of conveyor of boxes
Sodomka, Petr ; Jirgl, Miroslav (referee) ; Štohl, Radek (advisor)
The first part of the thesis is focused on a belt carrier model blueprint. The next part contains the list of all the parts needed to construct the model. The realisation of the model (mechanic-wise and electric-wise) is described in a special section. A familiarisation with the PLC from Rockwell Automation company follows. The last part of the thesis is focused on the creation of a model example in a development environment of RSLogix 5000, and the launching and creating of the model.
|
|
|
Magnetic fields for medical experiments
Punčochář, Marek ; Cipín, Radoslav (referee) ; Patočka, Miroslav (advisor)
his work deals with the creation of magnetic fields for medical experiments. The first part deals with different types of coils, with a focus on the Helmholtz coil. Longer be described here how the winding coil-shaped mats, calculate the length of the field lines. After the work is focused on the involvement of the coil into the circuit.
|
|
|
Sensorless position control of solenoid valve
Keprt, Jaroslav ; Janák, Luděk (referee) ; Houška, Pavel (advisor)
This thesis deals with the determination of the position of the solenoid core in real time based on the measured current. The reference position of the current is used for feedback control of the solenoid. For this issue, software tool Matlab/Simulink was used. For current and temperature measurements, PCB circuits were created. The whole project was carried out on the dSPACE platform.
|
|
|
Sensorless position control of solenoid valve
Keprt, Jaroslav ; Grepl, Robert (advisor)
This thesis deals with the determination of the position of the solenoid core in real time based on the measured current. The reference position of the current is used for feedback control of the solenoid. For this issue, software tool Matlab/Simulink was used. For current and temperature measurements, PCB circuits were created. The whole project was carried out on the dSPACE platform.
|
|
|
Pulsatile Magnetic Field Possibilities in Child Neurology
Walek, Petr ; Čížek, Martin (referee) ; Sekora, Jiří (advisor)
Project Pulsatile Magnetic Field Possibilities in Child Neurology in his forepart paies medical use of Pulsatile Magnetic Field. Summaries a therapeutic effects of field which is interacting with biotic issue and determines which of those effects are acceptable for treatment of Infantile Paralysis. Below it describes single Bio-Parametres of Pulsatile Magnetic Field and analyses reasons and effects of Infantile Paralysis. Below it describes single Bio-Parametres of Pulsatile Magnetic Field and anylyses reasons and effects of Infantile Paralysis. In second part is described a block diagram of magnetotherapeutic device for treatment of Infantile Paralysis. Described is principle of function of blocks. In third part is decribed circuit solving of magnetotherapieutc device and is desribed flowchart for microcontrollers.
|
|
|
Magnetic fields for biomedical experiments
Otýpka, Jan ; Cipín, Radoslav (referee) ; Patočka, Miroslav (advisor)
In this work deals with magnetic fields for use in biomedicine. This solution involves the choice of the correct geometric arrangement of coils for generating magnetic field with a homogeneous distribution of magnetic induction of the widest possible area. The paper compares thre traditional types of coils, solenoid, toroid and Helmholtz coil. For Helmholtz and solenoid coil and is then carried out an analysis of the magnetic flux density in the inner space. Next part is devoted to electrical resonance in the LC circuit. This is then utilized for the development of pulsed magnetic field in the Helmholtz coil. It summarizes the theoretical and practical knowledge to design and construction of resonant converters. The end is devoted to the measurement of circuit parameters and verification of theoretical knowledge.
|
|
|
Magnetotherapeutic device for Child Neurology
Walek, Petr ; Rozman, Jiří (referee) ; Sekora, Jiří (advisor)
Project Magnetotherapeutic device for Child Neurology in his forepart paies medical use of Pulsatile Magnetic Field. Summaries a therapeutic effects of field which is interacting with biotic issue and determines which of those effects are acceptable for treatment of Infantile Paralysis. Below it describes single Bio-Parametres of Pulsatile Magnetic Field and analyses reasons and effects of Infantile Paralysis. In second part is described a block diagram of magnetotherapeutic device for treatment of Infantile Paralysis. Described is principle of function of blocks. In third part is defined circuit solving of controlling, supervisory and generating part of magnetotherapeutic device. Function and wiring of components is described in detail. There is also created a Printed Circuit Board. Device is controlled by three microcontrollers, therefore there are described flowcharts and controlling programs for microcontrollers.
|
|
|
Programmable Thermoregulator Design
Kollár, Tomáš ; Steinbauer, Miloslav (referee) ; Hermany, Jiří (advisor)
The aim of the study was to design, build and experimentally verify a programmable thermostat. The main control unit of the thermostat is an ATmega168 microcontroller which communicates via I2C bus with remote MAX6615 chips. They are used to measure temperature with a set of thermistors and control the flow of the hot water in the heating system. This work deals with issues of remote control through the I2C bus, servomotor steering, precision temperature measurement and describes the inner workings of the system. The next chapter includes a proposal for possible extension of the system. The last part contains the manual of the control menu structure and a brief description of the software.
|
|
|
Fluxmeter with graphical display of B-H curve
Ježek, Jaroslav ; Mačák, Jaromír (referee) ; Hanák, Pavel (advisor)
This work deals with simple fluxmeter which is able, together with other device, to show hysteresis loop. Hysteresis loop is a graphic expression of dependence of magnetic induction on intensity of magnetic field. Oscilloscope is used to display the hysteresis loop. This device is fully sufficient for the display. The measured objects are solenoids from various kinds of materials with the same shape. The main aim of this work is the design, realization and description of the fluxmeter. The fluxmeter consists of several partial blocks. The first one, on which this work is focused, is signal generator which is able to generace different kinds of signal. The generated signal comes on primary winding of solenoid where a magnetic field on a given intensity rises. An amplifier is used to obtain the sufficient intensity. Next thing this work is focused on is the design of the integrator which is necessary for the correct function of the fluxmeter. As suggested, there is shown the block diagram of linking of individual parts. There are described the measured results at the end of this work.
|
guest ::
