|
|
Nemčička Winery Center - Industrial buildings
Otáhal, Miloslav ; Myslín, Jiří (referee) ; Boleslavská, Yvona (advisor) ; Sobotka, Jindřich (advisor)
The subject of this bachelor’s thesis is a design of new-build winemaking center in Němčičky situated on the cadastral territory Němčičky u Hustopečí. The goal of this work is to create an architectural and urban conception, which will be an attraction for both local and distant winemakers. Due to the surrounding landscape the building is designed as inconspicuous and the purpose is to rather blend in with the landscape than to subdue it. For this reason the object SO 01 (the winemaking center) has a façade made of mirror panels Ruukki in which the surrounding vineyards should reflect. The opposite is the object SO 02 (the lookout tower) which creates landscape dominance.
|
|
|
Lookout tower
Jedzoková, Patricie ; Pešek, Ondřej (referee) ; Balázs, Ivan (advisor)
The object of the diploma thesis is design and assessment of a steel lookout tower situated in Beskydy mountains. Two different variants were designed. The first variant is of square shaped plan and the second one is of hexagonal shaped plan. Both variants are spatial truss structures. They are shaped as hourglass. The variants were compared and the first one was chosen to be further developed. The lookout tower is 36 meters high and it is divided by floors. One floor is 3,6 meters high. The widest section is 8 meters, the narrowest section is 5 meters wide. The structure is pin-supported into concrete foundation. The concrete is class C25/30. The roof covering is made of trapezoidal sheet of class S280GD. Each steel element is made of steel of class S355.
|
|
|
Restaurant with Point of View
Bittman, Jaroslav ; Hubáček, Petr (referee) ; Hubáčková, Blažena (advisor)
The aim of the master thesis „ Restaurant with a view“ is project for realization of a building. The building is situated in city district Brno – Veveří. New building will be placed instead of a current garage in the end of the street Rybkova. The building has two floors. The bearing system is a combination of ceramic bricks Porotherm and reinforce conrete frame. The frame consists of columns and longitudinal girders. The ceiling is a monolithic reinforce concrete slab. The roofs above both floors are flat and walkable with waterproofing layer made of modified bitumen sheets. The walkable layer is made of concrete paving with a rectification targets. The projekt also solves preparation for possible placing of wooden tower on the roof of the second floor. Wooden tower was made just as initial design.
|
|
|
Kraví hora - BUT Family silver
Peštálová, Lucie ; Dvořák, Miloš (referee) ; Nový, Alois (advisor)
The subject of the diploma thesis is to design a project study and a building program that would become a compromise between the requirements of the city of Brno and BUT in the area of Kraví hora in the Brno city center. The city of Brno would like to transform the area into a public park. But BUT considers it as its "family silver" because they realize its extraordinary value. Options of a constructions are really limited because of many area regulations. My proposal counts on the demolition of all existing buildings in the area, respects property area relations , protection zone, continuity with existing traffic roads, height regulation, imaginary raster of surrounding buildings, slope of terrain and orientation to the cardinal points. My suggest represents a study of five groups of objects which creating a rectangular raster. As a compromise solution, I chose the presentation and promotional areas of the individual faculties of BUT for the content of the buildings. Faculties have spaces for hobby groups for the public comprise all age groups included. I also designed the BUT Museum of History, a multimedia hall, a cafeteria, studios, a student leisure center and an observation tower with a climbing wall.
|
|
|
Watchtower in Brno Kohoutovice
Komárek, Ondřej ; Bajer, Miroslav (referee) ; Barnat, Jan (advisor)
The main aim of my master´s thesis was to design a load-bearing steel structure of the lookout tower situated in Brno-Kohoutovice. The height of the load-bearing structure is 35.5 m. My design comprises two different engineering solutions. Solution A is a lattice space frame whereas Solution B works with continuous columns with vertical bracing. For further development, Solution A has been chosen. The proposed structural material is the S355 steel. My thesis includes an engineering report, a statics analysis and drawing documentation.
|
|
|
Steel Structure of Observation Tower
Virág, Patrik ; Pilgr, Milan (referee) ; Hron, Lukáš (advisor)
The subject of the diploma thesis is design and structural analysis of loadbearing steel structure of observation tower, which is located southeast of Černá Hora, township Blansko. The design is processed in two options. Parts of the thesis are engineering report, structural design report for both of the options and graphical documentation in specified range. The structure’s height is 25.3 m and maximal ground plan dimension is 6 x 6 m. Steel grade S355 was chosen as main material. The sub-objectives of the structural analysis are load effects calculations (permanent load, imposed load and climatic load), entering of loads to the calculation model and calculation of internal forces and deformations. An assessment of the supporting elements and selected joints is also included. There are dynamic design features considered in the calculation. All calculations were performed in accordance with valid ČSN EN standards.
|
|
|
Viewing tower in Beskydy
Pojezný, Tomáš ; Barnat, Jan (referee) ; Šmak, Milan (advisor)
This work contains structural design and static assessment of the viewing tower in Beskydy. Construction is shaped like fir cone and it is made from glued laminated profiles and steel square tubes. Joints are realized from steel structural elements. Ground plan is regular octagon with external diameter changeable from 7,3 m to 9,3 m. Tower has five viewing platforms. Total height of construction is 27,5 m. For designed structure is made detailed static assessment and drawing documentation.
|
|
|
Construction technological project of the lookout tower Vartovna near the Seninka village
Starnovský, Jakub ; Brandtner, Michal (referee) ; Venkrbec, Václav (advisor)
The diploma thesis deals with the complex construction of the Vartovna lookout tower near the village of Seninka. Within this work was prepared item budget, drawings of construction site equipment for the main construction stages, concreting scheme and landfill supply, time schedule of the whole construction, construction financing plan, number of workers, necessary machines and mechanisms with their deployment over time, technological regulation for monolithic foundations. hydraulic concrete structures, technological regulation for the assembly of the steel structure of the lookout tower, control and test plans for monolithic and prefabricated structures, the formwork scheme of all foundation structures, and safety and health protection at work.
|
|
|
The Viewing Tower in South Moravia
Turková, Martina ; Bajer, Miroslav (referee) ; Šmak, Milan (advisor)
This master’s thesis deals with the design and static assessment of a lookout tower in The Brno Zoological Garden situated on the hill called Mniší hora. The construction of the lookout tower is meant to be of a circular ground plan and its overall height is 31 m. The construction was designed in two variants. For both methods was used a combination of steel and solid or glued laminated timber. For detailed elaboration was selected only one variant. The lookout tower was assessed in a Scia Engineer 15.1 software.
|
|
|
The Viewing Tower in Western Jeseníky
Nosková, Denisa ; Barnat, Jan (referee) ; Šmak, Milan (advisor)
The purpose of this thesis is to create design and static assessment of the viewing tower in western Jeseníky mountains. The Ground plan is formed by regular hexagon with outer diameter 0.8 meter. Glued laminated profiles, steel tubes and elements of solid wood were predominantly used for the construction of the building. The viewing tower has four viewing platforms and total high of the structure is 28.5 meters.
|
guest ::
