|
|
A laboratory task to verify the properties of audio devices
Staňková, Karolína ; Marcoň, Petr (referee) ; Mikulka, Jan (advisor)
The aim of this thesis is familiarization with the parameters of an audio device and their measurements according to the standards (AES17-2018 and ČSN EN 60268-3). A laboratory task for the Measurement in Audio Engineering course is designed, based on the study of the standards. The first part of the thesis deals with detailed analysis of the measurements of different parameters of audio device. The described procedures are consequently employed to design the laboratory task. The second part of this thesis is dedicated to design the laboratory task. The automatized system based on HP VEE platform was developed to provide the multiple measurement. The attachments of this thesis contain the student’s manual for the laboratory task, the sample protocol, the testing measurement manual and the sample protocol for the testing measurement.
|
|
|
Modular Active Crossover Network - Laboratory Tool
Holínský, Jan ; Hanák, Pavel (referee) ; Balík, Miroslav (advisor)
This thesis is about design of active frequency crossovers and their implementation. The work analyses particular types of circuits used in active frequency crossovers, especially circuits used for laboratory device. Then the work describes design of printed circuit boards (PCB) for the designed circuits and construction of modules for the laboratory device, when the compatibility and modularity is important for all active frequency crossovers arts. These modules are made and testing its functions. In this thesis is disassembled final proposal laboratory device and laboratory device is realized. The design and measurement of the characteristics of active frequency crossovers and correction circuits is processed in the form of a laboratory tasks.
|
|
|
Laboratory workplace for virtual reality
Budáč, Adam ; Polák, Ladislav (referee) ; Kufa, Jan (advisor)
This bachelor’s thesis is about creation of laboratory workplace for virtual reality. In theoretical part, it’s analysis of various types of devices for use in VR, description of operation principle of these devices used in VR, analysis of modern coding algorithms suitable for use in VR, suitable use of these codecs for 2D, 3D a 360° multimedia content, options of obtaining and playback of this content, comparing the difference against classical displaying methods and quality measurement of this content using objective metrics at different qualities and compressions. In experimental part, there’s described database creation of video content, coding these video sequencies using objective metrics, creation of laboratory workplace for use with VR, creation and sample elaboration of laboratory task dedicated to virtual reality.
|
|
|
Analogue comparators for educational laboratory purposes
Šafařík, Daniel ; Petržela, Jiří (referee) ; Domanský, Ondřej (advisor)
The goal of this bachelor thesis is to design complete solution for assembling of laboratory task on comparators topic. This thesis contains an introduction on comparators and a subsequent analysis of some of their basic functions. Thesis also contains design and simulation of the individual parts in the OrCAD program, from which the final product for laboratory task is constructed. There is also design of the printed circuit board along with its measurements. Another part is the process of designing and verifying its functionality. A sample protocol is prepared for the laboratory task.
|
|
|
Preparation of laboratory exercise for school subject Ecology in Manufacturing
Balcárková, Lucie ; Vaněk, Jiří (referee) ; Bača, Petr (advisor)
The thesis deals with the design of laboratory task on selected topics and brings together theoretical knowledge needed to understand the principle and function of the proposed system. The theoretical design is elaborated from the point of view of physical principles, physical feasibility, electronic difficulty, user service, correctness of the system, and its economic aspect. Furthermore, the practical implementation of the chosen task is disscussed in detail, based on the collected theoretical knowledge, a comparison of the available options and the results of the measurements made.
|
|
|
Design and realization of a new laboratory exercise with PLC B&R Automation
Cejpek, Zdeněk ; Němec, Zdeněk (referee) ; Lang, Stanislav (advisor)
This bachelor thesis is concerned with designing of a laboratory task primary dedicated for the course „Advanced control methods“, which for the education uses the instruments of company B&R Automation. From possible aproaches chooses modeling of dynamic systems using analog electrical circuits. Those circuits are realized in modular manner, in order to allow building models of various systems. The thesis also includes a desing of proper casing, which simplifies the manipulation by building of the systems. Using designed prototype modules, a model of a separately excited DC motor was built. This model is used for realization of the laboratory task, for which is provided a short manual including some basic program for Automation Studio. The thesis also briefly introduces the company B&R, it´s products and a PLC configuration used in courses „Advanced control methods“.
|
|
|
Selective Circuits - Laboratory Experiment
Košťál, Stanislav ; Vágner, Petr (referee) ; Urbanec, Tomáš (advisor)
The aim of this thesis is to describe the distribution and behavior of selective circuits and methods for their implementation. There are formulas provided for the calculation of the frequency components of selected second-order RLC filters. It further describes the choice of filter frequency components and computing relationships needed for the construction of coils. The work also includes a description and complete information needed for making measurements of the measurement of the RLC band-pass. The annex to this work includes all the materials needed for implementation of laboratory tasks designed to measure using the product.
|
|
|
OTDR optical path analyzer
Šimková, Barbora ; Tomašov, Adrián (referee) ; Dejdar, Petr (advisor)
The aim of this master's thesis was a theoretical analysis of OTDR issues, analysis of OTDR device components, as well as basic parameters of this device. The thesis also includes a theoretical analysis of reflections, scattering, and various types of connectors. In the practical part, a circuit design for OTDR measurement was developed and subsequently implemented. The circuit was realized using the Red Pitaya development board and Koheron laser. Additionally, a circuit for direct method measurement was also created. In the LabView development environment, a program was created, including a graphical user interface. A laboratory task was also designed to provide a basic understanding of OTDR measurement issues.
|
|
|
Impedance Tube for Measuring Sound Absorption Coefficient
Raška, Adam ; Sysel, Petr (referee) ; Schimmel, Jiří (advisor)
This thesis, consists of summering basic knowledge about absorption factor, methods for its measuring and construction of impedance tube for measuring with chosen method. Besides that, this thesis i salso about measuring absorbtion factor of available materials in this tube, and proposing laboratory task about absorbtion factor measurement, which should use crafted measuring equipment.
|
|
|
Control of a virtual production line
Barčák, Martin ; Kacz, Peter (referee) ; Štohl, Radek (advisor)
The aim of this work is to get acquainted with the Factory I / O development systems and then describe it. Furthermore, to design a laboratory task whose task is to move and load pallets with material into a vertical warehouse using Factory I / O controlled by a PLC and to carry out a laboratory task. Finally, there is a need to create a sample laboratory task.
|
guest ::
