|
|
Family house with a bicycle shop
Beránek, Tomáš ; Stodůlka, Jindřich (referee) ; Sukopová, Dáša (advisor)
The thesis is focused on preparation of project documentation of a detached family house with a bicycle shop. The shop is situated in ground floor and house has also atic and basement with garage for two cars. House is completely designed in Velox system. Thanks to the system it is energy-saving building. Drawing part was processed in a computer program AutoCAD.
|
|
|
Family House
Kissová, Andrea ; Gábrová, Lenka (referee) ; Winklerová, Jitka (advisor)
The aim of bachelor thesis is working out the project documentation to execution of a new detached house in the cadastral area of Moravský Písek. The house is detached and located within the area defined by the regulatory plan of the municipality. This house has a basement, ground floor and an attic. The house is designed for one family of 4 members. In the basement there are 10 rooms, which serve mainly for all utilities and storage facilities. The ground floor is the social part of the house with 8 rooms and a garage combined. The attic acts primarily as a quiet zone,in which there are 7 rooms. In the exteriér there is a staircase connecting the terrace with a basesment. The house is built on a foundation of strips made from plain concrete. Vertical and horizontal supporting structures of the house are from the type of system Porotherm. This is a type of brick construction system. The roof construction is designed with a pitched roof in an L shape with a slope of 39°. The drawing part is handled by the AutoCAD software, visualization is processed in the ArchiCAD and Artlantis software.
|
|
|
Family House with an establishment
Strnadová, Ludmila ; Brabec, Zbyněk (referee) ; Čuprová, Danuše (advisor)
Bachelor thesis solves the design of a house with establishment in Strašov. The building has approximately shape of a Letter L. The building has two floors and basement. The house is partially covered with a pitched gable roof and single flat-roofed. There are commercial space (flower arrangement) and housing unit in the building.
|
|
|
Familly house in Novém Městě nad Metají
Sháněl, Tomáš ; Burdová, Jana (referee) ; Brukner, Bohuslav (advisor)
The project addresses the low energy new build detached house, which will be permanently used for housing. The building is designed as a two-storey house, which is intended to be permanent residents of 4-5 persons. Roofed building with a flat roof is solved by using a bottom discharge reinforced concrete slabs. Load-bearing walls are from Sendvix manufacturer KM - BETA. The ceilings are designed as monolithic. The building is located in the gap between the existing building houses. The house has a garage for one car.
|
|
|
Detached house in Loučky
Jakubcová, Miluše ; Struhala, Karel (referee) ; Jelínek, Petr (advisor)
The subject of this bachelor thesis is the project documentation elaboration for the construction of a detached house in the street Loučka, located in the village of Dambořice. The land is sloping towards the southwest and the object is designed as a two-storey with a basement. The ground floor is mostly social and for relaxing in the back, while the attic is mainly for relaxing and partly for working. In the basement, there is a technical background of the house, which is continuously connected to a double garage. The vertical structures of both above-ground floors are made of Porotherm's clay blocks, while the basement floor is made of the Best's permanent formwork. The house is roofed by a L-shaped saddle roof and an adjacent garage is roofed by a flat green roof that is accessible from the social part of the house.
|
|
|
House on the slope
Vejr, Tomáš ; Maceková, Věra (referee) ; Myslín, Jiří (advisor)
Aim of this Bachelor thesis is to design a single-storied house with an attic in Suchomasty. The object is single-family detached house with a partial basement, and a garage. The house is designed for family of four. In the basement there is a garage, vestibuled entrance to the building, clothes closet, toilet room, utility room, and stock room. In the ground floor there is a hall and stairs, living room, kitchen and dining room, bathroom containing a toilet, bedroom, and room for house work. In the attic there are two children's rooms, two clothes closets, and bathroom containing a toilet. The vertical structure is made up from wooden platform frame consisting of supporting members 160 × 80 mm. Basement perimeter walls are made of KB blocks 290 × 390 × 190 mm filled with reinforced concrete. The horizontal structure above the basement is composed of reinforced floor with the 150 mm thickness, and above ground floor is composed of strip joist. There is a pitched roof on the house, purlin system.
|
|
|
Family house
Uhlíř, Jakub ; Majsniar, Michal (referee) ; Hlavačka, Tomáš (advisor)
The project is working on a complete documentationon of family house with attic at the documentation for a building construction. The family house is designed for four family members. Built-up area is 185,3m. Roof is gabled with skylight. The house is lined with ceramic bricks Heluz. The proposal places emphasis on the static solution, building layout, fire safety, energy saving and safety in use. Dawings have been processed in software for design – Nemetschek Allplan.
|
|
|
Residential house Hliniště, construction-technological solution of rough substructure
Divácký, Petr ; Liška, Pavel (referee) ; Kovářová, Barbora (advisor)
This bachelor thesis is focused on the construction and technological solution of the rough substructure of the Hliniště apartment building in Velké Meziříčí. The house is composed of two separate building structures, built next to each other and set in the south sloping terrain. The construction is based on foundation feet and passports that carry the load from a top structure made of a prefabricated skeleton filled with ceramic masonry. The last 5th floor is realized as a residential attic, covered with a wooden roof with a saddle roof and sheet metal, profiled cover. The main chapters of this work are the technological regulations for the execution of earthworks and foundation structures, which are also processed by control and testing plans. In addition, the machine assemblies are designed for these activities, their schematic travel along the construction site, the excavation drawing, the building site layout, the budget item, the timetable and other attachments.
|
|
|
Family house
Kosařová, Pavla ; Majsniar, Michal (referee) ; Škramlik, Jan (advisor)
The subject of this Bachelor‘s thesis is newly built house for 6 people in the village Slavoňov in district Náchod. House is a single storey, part basement building with residential attic. The building garage, office and residential terraces partially protrude from the main body of the house. The house is designed as a brick building from the ceramic blocks, ceiling structures are reinforced concrete. The roof is gabled main mass with eccentric ridge. Over the working place is designed shed roof. Above the garage flat ply roof. The land is longitudinal, long side oriented SW-NE direction. Slightly sloping, downward from the road. All structures comply with the applicable standards and recommendations ČSN.
|
|
|
Mountain guesthouse with a restaurant
Stloukal, Ondřej ; Šuhajdová, Eva (referee) ; Šuhajda, Karel (advisor)
The project is handled by complete documentation , brand new detached house with mountain restaurants at the level of documentation for construction . The building is designed in the village Olšany district. Šumperk on plot No. 261/1 , 261/5 , 261/9 and 261 of / 12. Built up area is 1465 square meters , of which the construction of the house itself has a 445.2 square meters . The basement and ground floor is used for restaurants, restaurant facilities and staff , reception and social facilities for guests . The second floor and the attic is designed to accommodate guests. The pension has a capacity of 20 people , of which there are six double rooms and two suites on the top floor , each for four people. The operation of the pension are a total of four employees. The restaurant , with a capacity of 102 people , the total number of employees 8 . The building is designed as two rectangles perpendicular to each other forming the letter T. The building is based on the footings of plain concrete foundation slab drag over the basics with reinforcing karisítí . Walling system from Heluz , partitions from the system Knauf, reinforced concrete ceilings . Outdoor perimeter walls is insulated with polystyrene foam . The roof is gabled and three graduated height of the ridge , where the highest elevation is the main part +11.370 m , roof pitch of 35 °. The building is connected to the local road and the available utilities. Proposal for hotel and restaurant is processed in accordance with applicable standards and regulations for the country.
|
guest ::
