Národní úložiště šedé literatury Nalezeno 79 záznamů.  začátekpředchozí21 - 30dalšíkonec  přejít na záznam: Hledání trvalo 0.01 vteřin. 
Fluctuations in the scrape-off layer and edge plasma of the COMPASS tokamak
Seidl, Jakub ; Jiráková, Kateřina ; Adámek, Jiří ; Grover, Ondřej ; Horáček, Jan ; Hron, Martin ; Vondráček, Petr
We have identified two distinct types of turbulent fluctuations in COMPASS plasmas, the high-frequency edge oscillations and low-frequency SOL blobs. The transition region is localized in the near SOL, where both types spatially overlap and interact and the radial particle transport gradually transfers from high to low frequencies. Even though skewness of isat fluctuations is positive even inside LCFS, distinguishable Gamma-distributed PDF, formed by the low-frequency fluctuations, arises in the near SOL. This supports, together with turbulence spreading rate being positive in the near SOL but negative in the edge, the picture presented in [3] that most of the fluctuations that form a positive skewness in the edge region disappear around LCFS and new blobs are formed in the near SOL. Further, we cannot confirm the assumption that the blobs are generated randomly according to a Poisson process. Oscillations of all measured quantities, incl. radial particle flux, in the near SOL are peaked around ∼13 kHz. This seems to correspond to a poloidally rotating structure with a rather large poloidal wave-length ∼ 15 − 20 cm, that at least partly modulates blob generation. Nevertheless, we note that time separation of blobs becomes more random further in the SOL, possibly due to differences in their individual propagation. These observations hold for diverted plasmas, but the situation may be different in limited low-elongation plasmas where the radius of zero skewness was observed to be shifted significantly (several cm) inwards, compared to diverted configuration, and Gamma-like PDF is detected even inside the LCFS. Study of these plasmas is ongoing.
Plasma diagnostics using neutral lithium beam on the COMPASS tokamak
Háček, Pavel ; Stöckel, Jan (vedoucí práce) ; Glosík, Juraj (oponent) ; Klír, Daniel (oponent)
Tato disertační práce prezentuje diagnostiku neutrálního lithiového svazku na tokamaku COMPASS v Praze. V technické části je popsán systém pro vstřikování urychleného lithiového svazku do tokamaku COMPASS a detekční systémy pro emisní spektroskopii na svazku. Fyzikální část popisuje analýzu naměřených spektroskopických dat zejména se zaměřením na hustotní fluktuace v okrajovém plazmatu. Je prezentována detailní analýza turbulentních struktur v neudržené části plazmatu a výzkum nestabilit typu ELM během módu plazmatu s vysokým udržením energie. Práce také představuje vývoj a měření nové unikátní diagnostiky - sondy atomového svazku - využívající detekce ionizované části svazku k měření okrajového profilu proudové hustoty plazmatu.
OLGA – efficient full wave code for the coupling of LH grills
Preinhaelter, Josef ; Hillairet, J. ; Urban, Jakub
The full wave code OLGA, for determining the coupling of a single row lower hybrid launcher (waveguide grills) to the plasma, is extended to handle multirow multijunction active passive structures (like the C3 and C4 launchers on TORE SUPRA) by implementing the scattering matrix formalism. The extended code is still computationally fast because of the use of (i) 2D splines of the plasma surface admittance in the accessibility region of the k-space, (ii) high order Gaussian quadrature rules for the integration of the coupling elements and (iii) utilizing the symmetries of the coupling elements in the multiperiodic structures. The extended OLGA code is benchmarked against the ALOHA-1D, ALOHA-2D and TOPLHA codes for the coupling of the C3 and C4 TORE SUPRA launchers for several plasma configurations derived from reflectometry and interferometery. Unlike nearly all codes (except the ALOHA-1D code), OLGA does not require large computational resources and can be used for everyday usage in planning experimental runs. In particular, it is shown that the OLGA code correctly handles the coupling of the C3 and C4 launchers over a very wide range of plasma densities in front of the grill.
Fluctuations in the scrape-off layer and edge plasma of the COMPASS tokamak
Seidl, Jakub ; Jiráková, Kateřina ; Adámek, Jiří ; Grover, Ondřej ; Horáček, Jan ; Hron, Martin ; Vondráček, Petr
In this work we study properties of turbulent structures in the scrape-off layer (SOL) and edge plasma of the COMPASS tokamak. Two distinct types of coherent oscillations are observed: a) broadband high frequency branch rotating in the electron diamagnetic direction, appearing mainly in the confined region but protruding also to the SOL b) low-frequency blobs rotating in an opposite poloidal direction, formed in the vicinity of the radius of zero electric field. The transition region is localized in the near SOL, where both types spatially overlap and interact and the radial particle transport gradually transfers from high to low frequencies. Even though skewness of fluctuations of the ion saturation current is positive even inside LCFS, distinguishable Gamma-distributed PDF, formed by the low-frequency fluctuations, arises in the near SOL and most of the fluctuations that form a positive skewness in the edge region disappear around LCFS.
Termojaderná fúze a její energetické využití
Hladík, Jakub ; Brázdil, Marian (oponent) ; Šnajdárek, Ladislav (vedoucí práce)
Účelem této bakalářské práce je formou rešerše čtenáři přiblížit princip termojaderné fúze, její objev a výzkum, dále princip udržení fúze, druhy reaktorů využívajících termojadernou fúzi a následné jejich využití v energetice.
Preliminary Measurements of Neutrons From The D-D Reaction in The Compass Tokamak
Dankowski, J. ; Janky, Filip ; Kurowski, A. ; Stöckel, Jan ; Twarog, D.
Recent results of measured fast neutrons created in the D-D reaction on the COMPASS tokamak during ohmic discharges are presented in this paper. Two different type detectors were used during experiment. He-3 detectors and bubble detectors as a support. The measurements are an introduction for neutron diagnostic on tokamak COMPASS and monitoring neutrons during discharges with Neutral Beam Injection (NBI). The He-3 counters and bubble detectors were located in two positions near tokamak vacuum chamber at a distance less than 40 cm to the centre of plasma. The neutrons flux was observed in ohmic discharges. However, analysis of our results does not indicate any clear source of neutrons production during ohmic discharges.
Microwave reflectometry for density profile and turbulence measurements on the COMPASS tokamak.
Bogár, Ondrej ; Bílková, Petra ; Böhm, Petr ; Hron, Martin ; Pánek, Radomír ; Silva, A. ; Zajac, Jaromír ; Varavin, Mykyta
Microwave reflectometry is an established radar technique to acquire various scientific results in plasma fusion research. Fast electron density profile measurements are crucial for the study of fusion plasmas and the operation of fusion devices. Operation capability and first results of the reflectometry on the COMPASS tokamak are presented in this contribution.
Development and application of methods for measurement of magnetic field on tokamaks
Kovařík, Karel ; Ďuran, Ivan (vedoucí práce) ; Mlynář, Jan (oponent) ; Tichý, Milan (oponent)
Název práce: Vývoj a aplikace diagnostických metod pro měření magnetických polí na tokamacích Autor: Ing. Karel Kovařík Katedra: Katedra Fyziky povrchů a plazmatu, Matematicko-fyzikální fakulta, Univerzita Karlova Ústav fyziky plazmatu, Akademie věd České republiky, v. v. i. Vedoucí disertační práce: Ing. Ivan Duran, PhD. (Ústav fyziky plazmatu, Akademie věd České republiky, v. v. i.) Abstrakt: Práce popisuje ve dvou částech experimenty v rámci výzkumu jaderné fúze v magnetickém udržení. První část popisuje ozařovací testy Hallových senzorů s citlivou vrstvou tvořenou polovodičem z InSb. Test porovnává efekt ozařování pomalými a rychlými neutrony na citlivost Hallových senzorů. Ukazuje také malé změny vlastností senzorů pro dávky neutronů jen o řád nižších než se předpokládá za celou životnost tokamaku ITER. Druhá část popisuje měření parametrů turbulentních struktur v ořezové vrstvě tokamaku COMPASS a zejména paralelního elektrického proudu tekoucího podél těchto struktur. Práce popisuje design nové kombinované sondy schopné měřit nejen elektrostatické vlastnosti turbulentních struktur, ale i paralelní elektrický proud, který jimi protéká. Výpočet paralelního elektrického proudu je analyzován a porovnán s experimentem. Je ukázána statistická analýza získaných dat. Jsou prezentovány empirické vztahy pro...
Rozložení tepelných toků na stěnu tokamaku způsobených okrajovými nestabilitami
Kripner, Lukáš ; Cahyna, Pavel (vedoucí práce) ; Urban, Jakub (oponent)
Okrajové nestability (ELMy) jsou nebezpečím pro budoucí fúzní zařízení, jako např. ITER, kvůli velkým tepelným tokům, které náhle působí na povrch komponent vystavených plazmatu. Velmi slibnou metodou potlačení okrajových nestabilit je aplikace rezonančních magnetických perturbací (RMP). Tato metoda ovšem vede k vytváření lokalizovaných míst -- otiskům -- s vysokým tepelným tokem. Jak přítomnost ELMů tak RMP může omezit životnost fúzního zařízení. V této práci analyzujeme pomocí metody tangle distance prostorové a časové rozmístění otisků na tokamaku ITER s cílem zamezit krátkodobému přehřívání povrchů. Také zde analyzujeme quasi-double-null konfiguraci plazmatu tokamaku ITER, u které existuje obava z přehřívání horní stěny. Na základě modelování jsme ukázali potenciálně nebezpečné konfigurace RMP. Pomocí modelu ELMů zahrnutého v GPU kódu LOCUST studujeme prostorové a časové rozložení tepelných toků způsobených okrajovými nestabilitami v axiálně symetrickém i nesymetrickém plazmatu. Výsledky porovnáváme publikovanými experimentálními pozorováními. Powered by TCPDF (www.tcpdf.org)
Study of Equilibrium Magnetic Configuration in Tokamak Type Devices
Havlíček, Josef ; Tichý, Milan (vedoucí práce) ; Kubeš, Pavel (oponent) ; Van Oost, Guido (oponent)
Tato dizertační práce prezentuje magnetická pole tokamaku COMPASS a práci vykonanou během reinstalace COMPASSu v České republice. V technické části práce je popsána geometrie, vakuová magnetická pole a výkonové zdroje obvodů cívek poloidálního pole. Je představen návrh filtrů výkonových zdrojů a vylepšení algoritmu regulátorů výkonových zdrojů. Ve fyzikální části je popsána implementace modelu indukovaných proudů do kódu EFIT++, který se využívá pro rekonstrukci MHD rovnováhy. Kód EFIT++ byl přizpůsoben pro COMPASS. Je představeno využití kódu EFIT++ při provozu tokamaku COMPASS. Na příkladech je vysvětlena globální energetická bilance během nestacionárních fází výboje v tokamaku. Přiložené články popisují nové výkonové zdroje a zpětnovazební systém vyvinutý pro kontrolu plazmatu v tokamaku COMPASS. Powered by TCPDF (www.tcpdf.org)

Národní úložiště šedé literatury : Nalezeno 79 záznamů.   začátekpředchozí21 - 30dalšíkonec  přejít na záznam:
Chcete být upozorněni, pokud se objeví nové záznamy odpovídající tomuto dotazu?
Přihlásit se k odběru RSS.