|
Derrick of the filling car of coke-oven battery
Hurník, Štěpán ; Plachký, Pavel (referee) ; Pokorný, Přemysl (advisor)
This master´s thesis deals with a proposed design of the derrick of the filling car of a coke-oven battery, which is used for working with unit loads, repairing and maintenance of the filling car and cleaning of the battery risers. In the first part a solution concept was chosen. For this concept a main steel structure was designed, which was controlled in stress analysis by the FEM program I-DEAS NX 11. Further, the main parts of the lifting and travelling mechanism were calculated using specified parameters. In the conclusion of this thesis the results summary of specified targets is stated. Assembly drawing is in the annex of this thesis.
|
|
Pillar jib crane
Flídr, Tomáš ; Malášek, Jiří (referee) ; Pokorný, Přemysl (advisor)
This bachelor thesis deals with an construct proposal of derrick (crane) with these technical parameters: lifting capacity is 1000 kg, unloading lenght of its beam is 3000 mm, height of lifting is 7000 mm, maximum height of construction is 4000 mm. The thesis consists of strenght calculation for range of the main carrying components, suitable fittings, and technical drawings of this crane and blueprint of unloading device.
|
|
Mast crane for ships handling
Jandáček, Jaroslav ; Malášek, Jiří (referee) ; Pokorný, Přemysl (advisor)
This bachelor’s thesis is aimed on construction design of jib crane for ships handling. Crane with capacity of load 1 000 kg is placed on concrete pier in shipyard, it has electrical hoist and swivel mechanism, lift height from water level is 6 000 mm. This is a design calculation of each part of the crane and control strength calculations. The aim of this project is the concept designed solutions and functional calculation of the whole device. An integral part of the thesis is drawing documentation.
|
|
Pillar jib crane
Procházka, Tomáš ; Malášek, Jiří (referee) ; Pokorný, Přemysl (advisor)
This bachelor´s thesis deals with constructional proposal of jib crane with capacity of load 1000 kg, unloading length of its beam is 2700 mm and lift height 4900 mm. The aim of this thesis is analysis of construction with selection of suitable hoist and control strength calculation of the crane. A part of the thesis is drawing documentation.
|
|
Derrick crane
Votava, Michal ; Pokorný, Přemysl (referee) ; Malášek, Jiří (advisor)
This bachelor thesis deals with the constructional design of derrick crane with 4000 mm crane radius and lifting capacity 1500 kg. The thesis contains proposals for major structural elements, control calculation’s according to applicable standards and selection of suitable hoists. It also contains design documentation.
|
|
Derrick crane
Aulehla, Jiří ; Kašpárek, Jaroslav (referee) ; Malášek, Jiří (advisor)
This bachelor thesis deal with construction design of derrick crane. Lining length is 5000 mm, lift height 6800 mm and crane capacity 1200 kg. The thesis contains proposals for major structural elements, strength calculations and selection of suitable hoist. Involves also drawings in the form of a crane assembly and detailed drawing of arm.
|
|
Conceptual design of jib crane 2000 kg
Holomek, Jiří ; Pokorný, Přemysl (referee) ; Kubín, Martin (advisor)
This thesis deals with the conceptual design columned crane. The aim of this thesis is to select the main dimensions and calculate the dimensions of individual components using a crane columned design calculation and control of individual components and parameters of the crane columned a test calculation. Another task is to select the running and lifting gear.
|
|
Derrick crane
Kuhejda, Lubomír ; Šťastný, Antonín (referee) ; Pokorný, Přemysl (advisor)
This bachelor’s thesis is aimed on construction design of derrick crane for capacity of 1 000 kg, lining length of 4 000 mm and lift height of 4 800 mm. The purpose is to make design of main carrier and function elements including selection of suitable hoist by given requirements. Strength calculation of selected parts was made according to current applicable standards ČSN 27 0103. In the annex of this thesis are also assembly and manufacturing drawings.
|
|
Derrick crane
Kobzík, Martin ; Šťastný, Antonín (referee) ; Malášek, Jiří (advisor)
This bachelor thesis involves the analysis of construction of derrick crane and his design according to set parameters. The thesis contains strength calculations and proposals for major structural elements and important parts of the crane. It also contains a selection of suitable hoists and drawings in the form of a crane assembly and detailed drawing of arm.
|
|
Conceptual design of jib crane 600 kg
Mlejnek, Pavel ; Kašpárek, Jaroslav (referee) ; Kubín, Martin (advisor)
This Bachelor thesis deals with a conceptual design of column jib crane. The aim is to select the key dimensions and basic parameters of the column jib crane with the column design calculations and to check using the check calculation. This conceptual design also includes the choice of the hoist, running gear, auxiliary equipment and technical drawings.
|