National Repository of Grey Literature 30 records found  beginprevious20 - 29next  jump to record: Search took 0.01 seconds. 
On the evaluation of cutting performance when machining
Kolomý, Štěpán ; Fiala, Zdeněk (referee) ; Píška, Miroslav (advisor)
This bachelor thesis focuses on cutting performace during intterupted cutting conditions and on the problems of intermittent turning. There is tested cutting performace of indexable inserts from cubic boron nitride and ceramic during interrupted face turning in experimental part. Tools wear and shape of chips are analyzed. The output of this work is data processing and their comparison.
Testing of Cutting Tools for Multi-Axis Machining at Machining Centres
Dvořáček, Jan ; Mrkvica, Ivan (referee) ; Janáč, Alexander (referee) ; Píška, Miroslav (advisor)
The thesis is focused on testing of the cutting tools for machining on five axis machine tools and possibility of implementation of designed experiments in this area. The theoretical section focuses attention on analysis of specific features during five axis machining, including chip cross section and particularity of tool testing under high speed cutting conditions with consideration of dynamic stability of cutting tools. In the thesis force loading of the tool is discussed as well as its measurement process, considering force development caused by tool wear and data analysis. Description of designed experiment and its application to the area of tool testing is included as well. All theoretical predictions are followed by experimental verifying by extensive number of experimental tests, including evaluation of cutting tool condition, influence of hard coatings on cutting power of the tools, etc. For each of testing conditions are designed specific methods of processing of gathered data as well as evaluation of power of the cutting tools. Gathered data were processed by means of statistical evaluation and by statistical methods of designed experiments. The thesis contains also the extensive number of records and analysis, documented by means of light microscopy as well as electron microscopy.
Testing of cutting tools for multi-axis machining at machining centres
Dvořáček, Jan ; Píška, Miroslav (advisor)
The thesis is focused on testing of the cutting tools for machining on five axis machine tools and possibility of implementation of designed experiments in this area. The theoretical section focuses attention on analysis of specific features during five axis machining, including chip cross section and particularity of tool testing under high speed cutting conditions with consideration of dynamic stability of cutting tools. In the thesis force loading of the tool is discussed as well as its measurement process, considering force development caused by tool wear and data analysis. Description of designed experiment and its application to the area of tool testing is included as well. All theoretical predictions are followed by experimental verifying by extensive number of experimental tests, including evaluation of cutting tool condition, influence of hard coatings on cutting power of the tools, etc. For each of testing conditions are designed specific methods of processing of gathered data as well as evaluation of power of the cutting tools. Gathered data were processed by means of statistical evaluation and by statistical methods of designed experiments. The thesis contains also the extensive number of records and analysis, documented by means of light microscopy as well as electron microscopy.
Effective Machining Of Fiber Reinforced Composite Materials
Sedláček, Jan ; Janáč, Alexander (referee) ; Vrba, Vladimír (referee) ; Klement, Josef (referee) ; Humár, Anton (advisor)
The objectives for this dissertation are to push forward the current state of knowledge in the area of machining fiber-reinforced plastic (FRP). The most common machining operation performed on these materials is drilling owing to the need for component assembly in mechanical pieces and structures. Among the defects caused by drilling, delamination appears as to be of the most critical and may occur at both the entrance and exit plane. A number of theoretical and experimental studies have been made to create an analytical model of delamination in composite laminates. In this dissertation, the critical thrust force (force which initiates the delamination) is predicted using linear elastic fracture mechanics - assuming Mode I. Delamination is investigated by studying the evolution of feed force and torque applied by the tool on the workpiece. A four components piezoelectric dynamometer KISTLER 9272 with special PC-software is used for measuring and evaluating of torque and cutting forces, when drilling two different composite materials: carbon/epoxy laminate fabricated by hand lay-up technique and glass/polyester composite made by pultrusion. Wear mechanisms and location of the wear on the tool are also investigated (with respect to cutting material). The tool wear is measured with help of a common workshop microscope and recorded with scanning electron microscope PHILIPS XL30. Drilling experiments are performed to give complex technical information (i.e. cutting conditions, tool geometry, tool wear and so on) which enables efficient machining of composite materials. Delamination-free drilling is given special emphasis in the experiments. Methods of statistical analysis (DOE) are used to determine which factors have the most influence on delamination.
Establishment of cutting conditions for selected aircraft parts
Baron, Yoann ; Sliwková, Petra (referee) ; Píška, Miroslav (advisor)
Tato práce obsahuje přehled superslitin na bázi niklu, jejich obrábění za vysokého tlaku chladicí kapaliny, týká se také metod optimalizace pro tento typ obrábění a následné analýzy opotřebení nástroje. Tato studie byla vytvořena ve spolupráci se společností Safran, experimentální část byla zrealizována ve výrobním závodě Evry-Corbeil ve Francii. Experimentální část práce se týká optimalizace řezných podmínek pro vnitřní hrubovací soustružení součástí pro letecký průmysl za vysokého tlaku chladicí kapaliny. Cíle práce byly následující: srovnání rozdílných vyměnitelných břitových destiček dodaných společností Safran, návrh hrubovacích strategií a určení optimálních podmínek pro každou z vybraných strategií. Byly uvažovány dvě rozdílné strategie: soustružení s konstantním posuvem a šířkou záběru ostří a tzv. „ramping“. Pro každou ze strategií byla provedena operace čelního a podélného soustružení. Výsledky byly porovnány na základě ekonomického a produktivního kritéria.
Analysis of material to be machined influence on the wear and tool durability
Tolkner, Josef ; Novák, Zdeněk (referee) ; Bumbálek, Bohumil (advisor)
Machining technology is a multi disciplinary field, and together with the economy are playing always more important role in the success of the enterprise market products and services. Recent studies show that it requires very close link between technology, management and information technology such as the integration process and production planning, simulation of manufacturing systems, production flexibility, virtual machines, control algorithms, etc. The key changes are based on the requirements for miniaturization of products, higher production accuracy, closer tolerances, better surface quality, part of weight reduction, reduction of lot size and reducing production costs. The report is focused on machining titanium alloys. In the theoretical part are presented the properties and the distribution of titanium alloys. In the practical part is then carried out an experiment aimed to influence the composition of workpiece material on tool wear. Experiment results and recommendations are listed at the end of this report.
Technological and economical parameters of a cutting tool
Drda, David ; Humár, Anton (referee) ; Prokop, Jaroslav (advisor)
Aim master´s thesis is analyzed technological and economical parameters of cutting tool. Firstly there are the parameters cutting tool, cutting wear, economical parameters and costs on running tools specified. In the conclusion there are reach technological and economical parameters of cutting tools analyzed and tested on practical sample. The sample is part of attachments in form programme on calculation in Excel, together with evaluation by means of graphs.
Machining of Ni80TiAl alloy detail
Kudrna, Miloš ; Novák, Zdeněk (referee) ; Humár, Anton (advisor)
The master`s thesis deal with analysis of machining technology of the bolt from the superalloy Ni80TiAl for the company Sanborn a.s. The aim of the thesis is the project of new technology by usage of new tool, indexable inserts and cutting conditions. The results are speedup of the roughing operation, reduction of the manufacturing cost and the product price.
Cutting forces when drilling fibre reinforced composites
Režný, Tomáš ; Sedlák, Josef (referee) ; Humár, Anton (advisor)
This master´s thesis is focused on fibre–filled composite materials, their distribution, labeling, usage, development and production. The aim of this work is complex processing of acquired technical knowledge, and evaluation of technological rehearsals of drilling composite materials which are reinforced by glas fiber and prepreg in terms of the impact of the machined material, wor-king conditions and the tool, and its wear to the feed force value and torque.
Verification of surface roughness and recommended cutting conditions after milling using tool with inserts
Novotný, Vojtěch ; Fiala, Zdeněk (referee) ; Zemčík, Oskar (advisor)
My bachelor’s thesis aims at practical testing inserts. The first part includes a theoretical analysis of problems connected with main tested parts. Especially, there is a description of face milling, surface structure after face milling and wear of the cutting tool. Next, an experiment is designed and performed, describing the machine used, the cutting tool, inserts, cutting conditions, material for testing and basic experiment criteria. In last part results of the test are presented and optimal value for cutting speed.

National Repository of Grey Literature : 30 records found   beginprevious20 - 29next  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.