|
|
The harmfulness of the hookah and the factors that affect it
Žabka, Miroslav ; Lízal, František (referee) ; Mišík, Ondrej (advisor)
In the recent period teahouses have been gaining a lot of traction and with them comes more and more consumers of hookahs. A lot of people perceive hookah smoking as less harmful to your body than cigarette smoking. The first part of this bachelor’s thesis consists of literature retrieval that deals with particles arising from hookah consumption and their deposition in the lungs, what is their influence on the human body and subsequently measurement methods that are used in practice. The aim of this work was to find out which factors influence the emitting particles that are produced by hookah consumption. The practical part deals with the construction of a measuring line for the aerosol that is produced when smoking a hookah. Subsequently, the influence of water, coconut and high-flammable coals on the resulting aerosol was investigated.
|
|
|
Air conditioning design in a disco club
Kvasnica, Peter ; Rubinová, Olga (referee) ; Blasinski, Petr (advisor)
This bachelor's thesis deals with the design of air conditioning systems of a disco club, which is divided into two functional zones, the dance area, and the backstage area. The main objective of the thesis is to propose suitable controls and systems for air management and maintaining optimal climate conditions in both zones. The theoretical part addresses the measurement and regulation of dehumidification. It discusses the impact of humidity on comfort and environmental quality, dehumidification technologies and methods, parameters of air dehumidification, and methods for measuring relative humidity of air. The next section of the thesis deals with the computational part, where the object is analyzed, parameters and thermal balances of the object are proposed. Air flow calculations, dimensioning of distribution elements and piping network, and the design of appropriate air conditioning units are also performed.
|
|
|
SW for balancing rotary machines
Dúcky, Martin ; Jankových, Róbert (referee) ; Zuth, Daniel (advisor)
This thesis deals with balancing of rotary machines in one plane. It is divided into a theoretical part and a practical part. The theoretical part is deals with the basics of vibrostatics and operational balancing, with emphasis on the evaluation of machine vibration. The practical part deals with SW solution in Matlab environment. It explains the functionality of individual parts, their arrangement, connection and mutual continuity, and layout of the program. The programmed solution is tested on a series of measurements in which the balancing itself is evalated and compared with the classical method used in balancing rotary machines in one plane.
|
|
|
Possibilities of Determining NVH Parameters of the Seat Track Release Mechanism in a Passenger Car
Ondriska, Viktor ; Řehák, Kamil (referee) ; Prokop, Aleš (advisor)
The focus of this thesis is the noise produced by a seat track release mechanism used in road vehicles. The goal of this work is exploring the possibilities of determining the radiated sound through experimental and computational means. The introduction is dedicated to different seat track designs. In the next chapter is a summary of computational means used to determine vibrations and noise. Further on, measurement methods of NVH parameters are described. Near the conclusion of the thesis there’s a breakdown of a newly developed seat track mechanism and the results of measurements that were carried out.
|
|
|
Effect of stress on pilot performance
Dedinský, Miroslav ; Zikmund, Pavel (referee) ; Šplíchal, Miroslav (advisor)
The main goal of this diploma thesis is to find out whether it is possible to measure stress during piloting. If so, it would be possible to develop systems that could help pilots in stressful situations and thus alleviate the stress, this would have great impact and possitively improve work performance. There are few similar studies in the field, the stress factors that affect the pilots and what physiological changes are observable in such situations. Finally, an experimental measurement is performed during three flights, which is aimed to demonstrate the information obtained and thus the possibility of measuring stress and the metod to do so.
|
|
|
Optimization of Run Configurations of k-Wave Jobs
Sasák, Tomáš ; Jaroš, Marta (referee) ; Jaroš, Jiří (advisor)
This thesis focuses on scheduling, i.e. correct approximation of configurations used to run k-Wave simulations on supercomputers from the IT4Innovations infrastructure. Especially, for clusters Salomon and Anselm. A single work is composed of a set which contains many simulations. Every simulation is executed by some code from the k-Wave toolbox. To calculate the simulation, it is necesarry to select a suitable configuration, which means the amount of supercomputer resources (number of nodes, i.e. cores), and the duration of the rental. Creation of an ideal configuration is complicated and is even harder for an inexperienced user. The approximation is made based on the empiric data, obtained from multiple executions of different sets of simulations on given clusters. This data is stored and used by a set of approximators, which performs the actual approximation by methods of interpolation and regression. The text describes the implementation of the final scheduler. By experimenting, the most efficient methods for this problem has found out to be Akima spline, PCHIP interpolation and cubic spline. The main contribution of this work is creation of a tool which can find suitable configuration for k-Wave simulation without knowing the code or having lots of experience with its usage.
|
|
|
Vehicle speed estimation
Roštek, Martin ; Kumpán, Pavel (referee) ; Krejsa, Jiří (advisor)
Rýchlosť vozidla je jednou z kľúčových stavových premenných, ktorej znalosť je potrebná v reálnom čase a s vysokou presnosťou, aby mohla slúžiť ako vstupná veličina pre systémy kontroly dynamiky vozidla. Jej priame meranie vo vozidle je však finančne náročné. Riešením tohoto problému môže byť použitie meraní zo senzorov bežne dostupných na palube vozidla a ich následný prepočet na rýchlosť vozidla. Tieto merania sú však veľmi zaťažené procesným šumom, čo vyplýva z komplexnosti pohybu vozidla. Preto je nutné vyvinúť algoritmus so schopnosťou vysporiadať sa s týmito negatívnymi vplyvmi. Algoritmus prezentovaný v tejto práci odhaduje pozdĺžnu rýchlosť vozidla s použitím meraní uhlových rýchlostí štyroch kolies, pozdĺžnej akcelerácie, momentov motora, rýchlosti otáčania okolo zvislej osi a natočenia volantu. Algoritmus bol testovaný na veľkom počte situácií považovaných za kritické na odhad rýchlosti vozidla, ako napríklad prudká akcelerácia na vozovke s nízkym koeficientom trenia, núdzové brzdenie s aktiváciou ABS, či jazda v kopci s kolesami v preklze, prinášajúc uspokojujúce výsledky.
|
|
|
Automated Hydroponic System
Borsuk, Adam ; Kolařík, Martin (referee) ; Číka, Petr (advisor)
The aim of the bachelor thesis is to study the design and creation of an automatic hydroponic system for plant cultivation and to solve the creation of components of the system according to the basic conditions for plant growth and subsequently to test and verify their properties, to evaluate their functionality. The second goal is to create a communication interface for sending and storing data from the system while creating a transparent display of stored and up-to-date data. The third objective is to verify the functionality and stability of the selected microcontroller as a control unit.
|
|
|
Measurement of three-wire transformer parameters
Kováč, Frederik ; Bukvišová, Zuzana (referee) ; Wasserbauer, Vojtěch (advisor)
Thebachelor’sthesisdealswithmeasuringsymmetriccomponentalimpedanciesofthree winding transformer. Thesis is divided into a theoretical and practical part. In theoretical part is described principle of transformer operation, its parameters, open-circuited and short-circuited measuring, measuring of zero-sequence impedance and connection schemes. Practical part deals with design of workplace in laboratory, description of used instruments and practical measurements with real connection schemes. For measuring parameters of three winding transformer is created a laboratory instruction manual.
|
|
|
Comparison of Shadow Methods
Kiss, Marcel ; Milet, Tomáš (referee) ; Tóth, Michal (advisor)
This thesis talks about comparison of shadow casting techniques within a scene. In the theoretical part, it describes and compares possible solutions of shadow casting and more detailed about Shadow Mapping and Shadow Volumes, which are among the most commonly used real-time shadowing techniques. The main part is about design and implementation of these two shadow methods using the OpenGL library. In the measurement part it compares methods based on measured values. The outcome of my measurements can be found in the final part of my thesis.
|
guest ::
