|
|
Apartment Building
Zemánek, Petr ; Pilík, Václav (referee) ; Struhala, Karel (advisor)
The subject of this bachelor's thesis is a design of an new apartment building in Bystřice nad Pernštejnem. It is a three-storey building situated on a slightly sloping terrain. The building is detached. The entrance is from the north side, where is an existing acess road. There are 4 same house units in the apartment building. The building is made of ceramic brick blocks. The ceilings are made of prestressed reinforced concrete panels and reinforced concrete prefabricated elements. The roof is flat, single-skinned, green and with a constant inclination. This work contains documentation of the real execution.
|
|
|
Center of leisure activities
Kaňovský, Michal ; Utíkal, Aleš (referee) ; Utíkalová, Ivana (advisor)
This diploma thesis presents a project documentation for construction of a center of leisure activities. It's construction site located on the outskirts of town Třebíč, "Na Kopcích" street. The building is composed from the two visual and three service parts which are connected to each other. On the left side in first floor there is a bowling with services and the second floor will serve for sport activities of jumping, spinning or relax massages. On the right side of building will be usable for education or for leisure activities. The building is designed as a two floors with partial basement. The construction system is formed by longitudinal wall system with precast hollow core slab or reinforced concrete slab. The structure is based on strip foundations with walls of permanent formwork. External wall is based on clay brick of therm type. The staircase is designed as prefabricated element or cast-in-place reinforced concrete. The roof is constructed as warm flat green roof with expanded polystyrene with screed to fall.
|
|
|
Health Center
Hlídková, Jana ; Dohnal, Jakub (referee) ; Pěnčík, Jan (advisor)
This master´s thesis deals with a draft of a health centre building in Chlumec nad Cidlinou. The centre is situated on a corner building site with barrier-free access near the city centre. The building is designed with simple functional lines ground on foundation strips with flat green roof. The perimeter walls, internal load-bearing and shear walls are from vertically perforated T&G block bricks. Internal non-load-bearing prefab walls are coated with plasterboard. Ceiling constructions and an attic are made of monolithic reinforced concrete. The building envelope is insulated with mineral wool. Most of the perimeter walls are coated with breathable facade made of lacquered galvanized lamellas and minor part of walls is compositely insulated and plastered with a scratched facade plaster. The health centre building is notionally divided into two masses with a three-storey west part and two-storey east part of the building. Both parts are mutually connected by vertical communication space with elevator looped by counter clockwise three-flight staircase. Ambulant health care will be provided in total 9 consulting rooms, 3 ambulant care offices and private clinic with 3 consulting rooms. Independent business of the commercial area and café provide the additional function. The master´s thesis also includes assessments in terms of fire risk, energy saving and heat protection, acoustics and vibrations, lighting and sunlight.
|
|
|
Flat Building
Podepřel, Petr ; Ducháč, Petr (referee) ; Požár, Michal (advisor)
The thesis deals with the design and calculation of selected parts of an apartment building in Brno. The apartment building is 6 floors (one underground floor and 5 above-ground floors), the underground floor is the entire reinforced concrete. The work focuses mainly on the static design and assessment of individual elements of reinforced concrete structures. The assessed load-bearing elements are the roof slab, ceiling slab 1.PP, prefabricated staircase, elevator shaft and so-called white bath (foundation slab, walls). All calculations are performed using SCIA Engineer. Individual ceiling slabs and staircases are solved by 2D models and the construction of the white bathtub is made in a 3D model. The design proceeded according to valid European standards ČSN EN 1992-1-1 and ČSN 73 1201. The result of this work is static design of reinforcement of all solved parts and drawing documentation.
|
|
|
Realization of the upper rough construction of apartment building in Prague
Ivanova, Anastasiia ; Venkrbec, Václav (referee) ; Novotný, Michal (advisor)
The aim of this bachelor thesis is to solve the stage of the upper rough construction of apartment building in Prague. The house made up of a monolithic structure. This monolithic structure consists of walls and ceiling slab. Stairs designed as prefabricated mounted on monolithic landing and half landing. The landings are part of the ceiling slab, the half landings will be carried out additionally by means of the reinforcement frames in the staircases. The object’s construction system is bi-directional. The building is basement and has ten aboveground floors and two underground.
|
|
|
Realization of the rough construction of a polyfunctional building, Moravský Svätý Ján
Hladíková, Simona ; Nečasová, Barbora (referee) ; Novotný, Michal (advisor)
The aim of this bachelor thesis is to solve the stage of the upper rough construction of a multifunctional house in Moravský Svätý Ján, which is a monolithic skeleton. This skeleton is made up of columns, beams and a cross-reinforced ceiling slab. The object's construction system is bi-directional. The staircase is made up of prefabricated elements and its supporting structure consists of brickwork made of grounded Heluz bricks. The building is non-blocked and has three above-ground floors, but the monolithic skeleton forms only the first and second floors. The third floor consists of a cladding made of grounded Heluz masonry, which forms the supporting structure of the roof made of sculpted wood joinery. The project was provided by Ing. Hušek Miloš. The project was adapted to enter a replacement land in Moravský Svätý Ján, otherwise the building is located in the Moste near Bratislava.
|
|
|
Nursery School
Koutná, Vendula ; Jelínek, Petr (referee) ; Vajkay, František (advisor)
Master’s thesis „Nursery School" is proceed in form of project document, including all requirement according to standards and regulations. New building is located on parcel number 439/50 in city Přerov. Detached building has three floors and is partly cellarage. It is brick construction system based on packs. The roofs are flat, and constructed as single shell. Te floors are connected by prefabricated concrete staircase and by elevator. The nursery school is designed as a four departments building, with capacity of 96 children.
|
|
|
Municipal Office Rapotín
David, Tomáš ; Daněk, Lukáš (referee) ; Utíkalová, Ivana (advisor)
The diploma thesis deals with the administrative building, which will serve as a municipal office in Rapotín. The building is designed as an extension to the existing cultural center Rapotín. The building structure is made as a masonry construction with ceiling construction of prestressed panels Spiroll. Single-layer flat roof is divided into two levels, the lower part is extensive green roof and the top of the roof is made such as usual flat roof. The building has two floors and partial basement coverage as well. The building is provided with four sheltered parking lots.
|
|
|
Familly house
Jedličková, Kateřina ; Dostálová, Darina (referee) ; Spáčil, Miroslav (advisor)
The bachelor thesis is about to design of a disposition and processing of project documentation for a detached house which contains one dwelling unit. The building is situated in the village Doubravník in Brno – venkov discrict. It is a slab-building with two floors with a flat roof single casting. The house is based on the wall footings of plain concrete and it is used the building systém POROTHERM and contact insulation ISOVER. A built-up area is 141,52 m2.
|
|
|
Residential House
Filla, Josef ; Karafiátová, Hana (referee) ; Mohelníková, Jitka (advisor)
Thesis describes the design layout and processing of project documentation for execution residential house with one housing squad on sloping allotment number 140/12 in catastral of the Vohančice. It is an object for family housing of four members with accomodation possibility for two guests. This object have one underground storey, two aboveground storey with flat roof and terrace in second aboveground storey and entrance to garden from first aboveground storey. Documentation includes an assessment of the building envelope and classification using the label, as well as fire safety of building. Theoretical part of this thesis i solving problems with proposing of the stairs.
|
guest ::
