|
|
Multifunctional building in Brno
Večeřa, Lukáš ; Párová,, Jitka (referee) ; Rusinová, Marie (advisor)
This thesis solves new building multifunctional building in Brno in the form of documentation for construction. The work contains text, drawings and calculation part. The building is designed as a detached and located in a slightly sloping terrain. The new building is designed as a four-storey with basement and three floors. The facility is designed sixteen and four residential rental units. The structural system is a cross- walled ceramic fittings. Horizontal structures ceilings are made of precast filigree ceiling tiles with nadbetonovanou distribution plates. The roof is designed as a single-layer flat. Part of the main road in the building is designed passenger elevator. The work process basic assessment of building in terms of building physics and approximate calculation of the base area.
|
|
|
Home for the Elderly
Bílková, Šárka ; Klimek, Karel (referee) ; Čuprová, Danuše (advisor)
The subject of the diploma theses is a house for the elderly. The building is designed on flat terrain in the Přerov cadastral, Dvořákova street. The building is designed for the permanent housing of the elderly, with the possibility of using day care services. There is a 25 residential units. The building is divided into two parts, three flors are supposed to living and the rest two floors made operating part. On the first floor there is a medical surgery, and a café. The building is designed of brick construction system ceramic blocks Porotherm. Ceiling structure is made of Porotherm Ceiling. The whole building is covered with flat roof. Home of the Elderly is designed as barrier-free.
|
|
|
Medical center
Fukanová, Lenka ; Šobrová, Zdena (referee) ; Utíkalová, Ivana (advisor)
My thesis project is the newly built medical center. It is a detached building, which is situated on a slightly sloping terrain, which will be compensated. The building has a partial basement and two floors. In the basement there is technical support. On the first floor there is a reception, waiting room, nurses, clinic and pharmacy. On the second floor there are again waiting room, nurses, clinic and exercise room. The property is adjacent park. The building is brick ceramic blocks HELUZ is based on the footings. It has a ceiling of prestressed panels and flat roofs, one of which is designed as vegetation. The building is insulated contact system.
|
|
|
Mountain hotel
Kyceltová, Lucie ; Blažková, Vendula (referee) ; Daněk, Lukáš (advisor)
The theme of this work is the building design, brand new mountain hotel with wellness services in Spindleruv Mlyn. The plot is located in a quiet part of town, near a wooded area and form a river Labe.V designed hotel is located three floors above ground level of the building is solved attic space. Roofed by a wooden roof false hip roof. Ground unsophisticated form a geometric shape, which layout is divided into sections. On the ground floor wellness facilities, a portion of the input dopňkovými with hotel services, floor is done mainly for accommodation, as well as the attic. Hotel is equipped with a slightly sloping plot in the construction of houses and other hotels. All living spaces are naturally ventilated and illuminated. The supporting structure consists Liapor system. The appearance of the hotel is in line with the surroundings.
|
|
|
Energy-saving detached house
Klečková, Kateřina ; Bantová, Sylva (referee) ; Čuprová, Danuše (advisor)
The subject of this Bachelor’s thesis is a new construction of energy-saving twostorey detached house without basement, built in Zlin. The shape and height setting of the object adapt to the land and the surrounding area. The house is suitable for housing a family of five members. The main entrance and the vehicle access to the building are on the 1st floor from the street level Nivy IV. The house has a cuboid shape with terrace on the east side. There is a garage for one car on the western side. The main living rooms are oriented on south. The vertical structure is made of the ceramic blocks. The ceiling above the second floors is stacked from ceramic inserts, 1st and 2nd floor are connected by reinforced concrete staircase. The house has a flat roof. The project was prepared in a computer program AutoCAD.
|
|
| |
|
|
Familly house in Novém Městě nad Metají
Sháněl, Tomáš ; Burdová, Jana (referee) ; Brukner, Bohuslav (advisor)
The project addresses the low energy new build detached house, which will be permanently used for housing. The building is designed as a two-storey house, which is intended to be permanent residents of 4-5 persons. Roofed building with a flat roof is solved by using a bottom discharge reinforced concrete slabs. Load-bearing walls are from Sendvix manufacturer KM - BETA. The ceilings are designed as monolithic. The building is located in the gap between the existing building houses. The house has a garage for one car.
|
|
|
Family House with an establishment
Bílková, Šárka ; Plachetský, Jiří (referee) ; Čuprová, Danuše (advisor)
My bachelor theses deals with a family house with an establishment that serves as tax adviser office. The house is situated in the Přerov cadastral, Dvořák street. The work deals with two-story slab-building includes a garage for one car. House is designed for four-member family. There is separate entrance from the street to the place of business on the left side of the first floor. The building is designed of brick construction system ceramic blocks Porotherm. Ceiling structure is made of Porotherm using POT beams and ceiling Miako. House and garage is covered with a flat roof single-shell.
|
|
|
Trade house in Hodonin - solution of ceiling phase
Šrámek, Pavel ; Hanzelková, Martina (referee) ; Novotný, Michal (advisor)
The aim of this work is to prepare technology project for the construction phase of new ceiling of trade house. The ceiling is made up of the 1.PP and above the elevator shaft monolithic reinforced concrete structures, and over 1.NP and 2.NP it consists of prestressed precast panels with the casting of Spiroll. The work documents are necessary, with the implementation of this phase. In particular, the technological specification, budget, schedule, design of mechanical assembly, inspection and test plan, a description of the site facilities, and documentation to the assembly formwork.
|
|
|
Detached house with two flats in Otradov
Myška, Jan ; Sobotka, Jindřich (referee) ; Kolář, Radim (advisor)
The subject of this bachelor´s thesis is the process of building the technical part of the project documentation for the realization of a detached house with two apartments in the village Otradov. The building is architecturally designed so that projects from the rural architecture. The house has a floor with attic and partial basement. Roofing is using two different height shelves. The building is designed structural system Naturblock. This bachelor´s thesis is on theme layers of roof sloping roofs.
|
guest ::
