|
|
Spray-coated working electrodes of electrochemical sensors
Lechner, Filip ; Majzlíková, Petra (referee) ; Prášek, Jan (advisor)
This thesis is about the selection of the better type of thick film working electrode for the detection of substances in aqueous solutions, modified by spray coated carbon nanotubes. The theoretical part of this thesis describes the technology of thick film, properties and production of carbon nanotubes, introduction to electrochemistry and electroanalytical methods for the detection of substances in aqueous solutions. The practical part is aimed to realization of the working electrodes by thick film technology and their modification by spray-coated layer consist of carbon nanotubes. Electrodes are characterized using voltammetric methods, electrochemical impedance spectroscopy and electron microscopy. In conclusions is selected the most suitable type of working electrodes for reproducible electrochemical analysis.
|
|
|
Nanopatterned alumina-based materials for electrochemical sensors and biosensors
Kynclová, Hana ; Hynek, David (referee) ; Trnková, Libuše (referee) ; Prášek, Jan (advisor)
The doctoral thesis is focused on basic research and development of nanostructured surfaces prepared using anodic alumina material. Various types of gold nanostructured surfaces and nanoporous aluminum membranes for electrochemical sensors and biosensors were prepared using the anodic oxidation method. Nanostructured surfaces were prepared by electrochemical anodization of aluminum material to form hexagonally arranged nanopores. Gold was then deposited into the nanoporous masks by electrochemical reduction from potassium dicyanoaurate solution using a pulse deposition method. The prepared nanostructured gold surfaces were electrochemically characterized by electrochemical impedance spectroscopy and voltammetry. Temperature stability and the effect of annealing on their electrochemical behavior at atmospheric pressure as well as in the vacuum were investigated. Then, gold nanostructures of various dimensions were prepared and the influence of their shape and dimensions on the electrochemical behavior was studied. Nanostructured surfaces were also modified with 11–mercaptoundecanoic acid, and the effect of this modification on the electrochemical results was studied. In the last part of the work, nanoporous aluminum membranes were prepared, and their permeability was studied.
|
|
|
Measurement module based on electrochemical impedance spectroscopy intended for hydrogen fuel cell research
Přecechtěl, Vít ; Pazdera, Ivo (referee) ; Procházka, Petr (advisor)
This thesis deals with diagnostic fuel-cell parameters using electrochemical impedance spectroscopy. The document begins with brief explanation of fuel-cell operation and its basic principles. Thesis continues with description of fuel-cell voltage generation and influence of charge dual-layer on impedance. After that electrochemical impedance spectroscopy, signals used for perturbation and evaluation of impedance spectrum using Bode a Nyquist plot is described. Next part explains measurement of impedance spectrum using potentiostat in combination with lock-in amplifier or frequency response analyzer. Practical part of thesis is dedicated to electric circuit design of EIS module and software designed for automatic measurement of impedance spectrum. Last part shows results of EIS module testing.
|
|
|
Optimalisation of coposite materials for civil engineering
Kazda, Tomáš ; Chladil, Ladislav (referee) ; Novák, Vítězslav (advisor)
This work is focused on optimalisation of coposite materials for civil engineering. In the theoretical part of the project is introduction of the composite materials and materials which are used for their production. There are also concerned their properties and possible application areas. In conclusion of theoretical part this project is a summary of the possible use of composite materials. The practical part compares the characteristics of the different types of composites made in terms of conductivity and the rate of corrosion.
|
|
|
Impedance spectroscopy characterization of perovskite solar cell materials
Křečková, Jitka ; Vanýsek, Petr (referee) ; Novák, Vítězslav (advisor)
The Master‘s thesis deals with the topic of perovskite solar cells with the main focus on the materials used for the active layer. In the introductory part, the electrical and optical properties of halide perovskites are described and specific examples of perovskite crystals are introduced. The description of impedance and photoimpedance measurement methods used for characterization of perovskite solar cells is also included in the thesis. The measurement of electrochemical impedance spectroscopy was conducted on four perovskite crystals and equivalent circuit was formed to fit the obtained data. Parameters of the circuit elements were acquired using the fitting method and were further evaluated in experimental part of this thesis.
|
|
|
Study of intercalation properties of electrode materials based on expanded graphite
Vencelides, Lukáš ; Máca, Josef (referee) ; Libich, Jiří (advisor)
The diploma thesis deals with the issue of electrochemical cells and deals in detail with lithium-ion batteries. The thesis describes the history of development of lithium-ion batteries, basic information about lithium and basic types of electrochemical cells. The work is devoted in detail to the description of characteristics and operating principle of lithium-ion batteries with emphasis on the negative electrode and negative electrode materials. Of the negative electrode materials, both the most widely used material graphite and modern materials with a great potential for the future are described. In the measurement methods the work describes methods CV, GCPL and EIS. Great emphasis is placed on the explanation of the principle of the function of electrochemical impedance spectroscopy and its application in measurement of electrochemical properties of materials used in lithium-ion batteries. There is also described the procedure of calculation of diffusion coefficients using the results of electrochemical impedance spectroscopy. In the practical part, two methods are used to calculate the diffusion coefficients of lithium ions into the negative electrode made of expanded flake graphite using the results of a series of electrochemical measurements.
|
|
|
Preparation Techniques and Characterization of Electrodes with Nanostructured Surface
Hrdý, Radim ; Trnková, Libuše (referee) ; Janderka,, Pavel (referee) ; Hubálek, Jaromír (advisor)
Nowadays, nanostructures fixed on solid substrates and colloidal nanoparticles permeate through all areas of human life, in area of sensors and detection as well. This dissertation thesis deals with the fabrication of nanostructures on the surface of planar electrodes via self-ordered nanoporous template of aluminum trioxide. The nanofabrication, as one of many possible techniques, is used to increase the active surface area of electrodes by creating unique surface types with specific properties. These electrodes are very perspective in the applications, such as biomolecules electrochemical detection and measurement. The transformation of aluminum layer into non-conductive nanoporous template in the process of anodic oxidation is a fundamental technique employed to obtain the array of nanostructures in this thesis. The fabrication of high quality nanoporous membranes with narrow pore size distribution on various types of metallic multilayers is one of the key experimental parts in this work. Several problems associated with the production of the thin-film systems, including the dissolving the barrier oxide layer, are discussed and solved. Another part of this work deals with the use of nanoporous membrane as a template for the production of metallic nanostructures via electrochemical metal ions deposition directly into the pores. The obtained nanostructures as nanowires, nanorods or nanodots are characterized by the scanning electron microscopy and energy-dispersive or wavelength X-ray spectroscopy. The electrode surface, modified by gold nanostructures suitable for the detection of biomolecules, has been chosen for the electrochemical measurements, due to the gold biocompatibility. The nanostructured electrodes were characterized by electrochemical impedance spectroscopy and cyclic voltammetry. The effect of nanostructured surface geometrical parameters, including the size of the electrochemically active area, on the results of electrochemical measurements has been observed and compared to flat gold electrodes. Two model biomolecules, namely guanine and glutathione, have been chosen for the study of potential application of these nanostructures in biosensors.
|
|
|
Liquid electrolytes for supercapacitors
Bill, Jan ; Dvořák, Petr (referee) ; Sedlaříková, Marie (advisor)
This work deals with the preparation of liquid electrolytes from different types of aprotic solvents with the aim of their application as electrolytes in electrochemical supercapacitors. Different sorts of aprotic solvents have been chosen, in which the following forms of salts were used: LiBF4, LiClO4,LiPF6. In the next part of the work, the properties of these solvents were measured and the best electrolyte, according to the biggest possible capacity of the system, was chosen. In the theoretical part of this work, the physical principle of supercapacitors and their propeties are described. It deals with electrolytes, their division and with the properties that are appropriate for supercapacitors. The experimental part of the work describes the process of preparation of the samples of electrodes, electrolytes and the techniques of measuring their capacities.
|
|
|
Impedance measurement of lead-acid accumulator properties
Vaculík, Sebastian ; Neoral, Jiří (referee) ; Abraham, Pavel (advisor)
This work deals with the new and unique four-point method measurement of the impedance characteristics for experimental positive electrode. The theoretical part provides a short introduction to the electrochemical power sources, including the lead-acid batteries, which were used for measurement. Furthermore, there is description of the principle of electrochemical impedance spectroscopy and analysis of obtained data by using the equivalent circuit, consisting of passive components. The experimental section is devoted to the description of the device, which is used for realization of connection of electrodes with Potenciostat VSP, and program which is used for the simplification of processing of results. The main aim of this bachelor thesis is to get better understanding of lead-acid accumulators and impedance measurements. At practical part of the thesis I performed first measurements by two-step method based on electrochemical impedance spectroscopy.
|
|
|
Carbon based electrodes for supercapacitors
Moncoľ, Maroš ; Kunovjánek, Miroslav (referee) ; Dvořák, Petr (advisor)
This master thesis deals with supercapacitors based on electrical double layer and proper carbon electrodes for this type of supercapacitors. In theoretical part of work is described theory of supercapacitors, energy storage principles and their properties. In the next part are described carbon materials, their properties and electrochemical methods of measurements that we used. In the experimental part is described preparation of electrodes, results and conclusion.
|
guest ::
