|
|
Design of supply source with several outputs
Lačný, Radek ; Lattenberg, Ivo (referee) ; Novotný, Vít (advisor)
The main objective of this work is a design of supply power source with several outputs for a telephone subscriber module. This module consists of two parts. First one is a control block containing a processor and auxiliary circuits, which requires voltage +3.3 V and +5 V. The second part is a board with cards, which provides dual telephone line feeding each and the board requires voltage in the -24 and -75 V. Bachelor's thesis contains a brief description of the basic types of convertors used in switched power sources, then the design of required power supply for the subscriber module together with the draft printed circuits and also the alternative power sources based on commercial products available on the Czech market. The resulting electrical scheme of power supply, including the printed circuits board schemes are presented in the Annex of the thesis.
|
|
|
Converters controling
Nevoral, Jiří ; Steinbauer, Miloslav (referee) ; Fiala, Pavel (advisor)
Bachelor´s project is study of DSP microprocessor problems to converters controlling with asynchronous motors and execution of a project. Study includes information on quality single type processor, benefits and disadvantage whole solving. Of purpose is DSP converters control with DMC1500.
|
|
| |
|
|
DC/DC converter
Němec, Martin ; Kuzdas, Jan (referee) ; Procházka, Petr (advisor)
This project deals with transistorized converters in particular a four-quadrant bridge. The main part of project discusses the drivers of transistors and a possible way of controlling a converter. The proposal of control electronics and the regulation structure are involved in the second part. This project also includes a construction of an apparatus which will be used as a teaching material.
|
|
|
Digitally Controlled Switching Power Supply
Krška, Vlastimil ; Zamazal,, Michal (referee) ; Šebesta, Jiří (advisor)
This master’s thesis is an introduction to switching mode power supplies, especially focused on digital control. It summarizes the basic topologies of switching mode power supplies, and discusses the fundamental issues of digital power supply control. It also summarizes basic informations about Piccolo microcontrolers, about experimental kit and about main parts of sample source code. Also is described here own implementation of the control law and the theory and implementation of maximum power point tracking. The conclusion of this thesis deals with implemantation a testing of the designed digitally controled switching power supply.
|
|
|
The inverter for arc-welding
Vaculík, Josef ; Klíma, Bohumil (referee) ; Červinka, Dalibor (advisor)
This diplom thesis theoretically deals about principle of pulse welding current source. Work explains operation principle of the single acting transmit converter used in realized construction and mention the others examples of converters types. Goal of the work is design individual parts of source : input filter, pulse transformer, output inductor and power semiconductors components. Thesis also contains description of the regulation circuitry of the converter, auxiliary power supply and pre-driver for power transistors. If everything will be all right prototype of the source will be assembled and measured. Results will be compared with theoretical assumptions.
|
|
|
Step-down converter with variable output voltage in range from 20 to 100 V
Pazourek, Petr ; Šmirg, Ondřej (referee) ; Hanák, Pavel (advisor)
This master's thesis describes the design and the implementation of a step-down converter with variable output voltage for laboratory purposes. In the introduction the basic functions of switching power supplies are shown, flyback, forward and push-pull converters are described, followed by some integrated circuits for power management of converters. The second chapter discusses in detail the design of requested switched power supply, including the calculation of the electronic parts and design of the storage inductor. Following are described some observations of building this power supply, including the output characteristics. In conclusion, the obtained results are assessed, including proposals to improve whole design.
|
|
|
Auxiliary power sources in electric traction
Kuzdas, Jan ; Procházka, Petr (referee) ; Červinka, Dalibor (advisor)
The purpose of this thesis is proposal of auxiliary power sources in electric traction. Specifically we deal with two converters. Both of them were used in traction vehicle's applications, which are developed by the Department of Power Electrical and Electronic Engineering, Brno University of Technology. First converter was used as a power supply in secondary traction mechanism of electric locomotive. Second one to power supply of dash board in automobile with fuel cells.
|
|
|
Adaptive Control of a DC Drive
Krkoška, Roman ; Huták, Petr (referee) ; Skalický, Jiří (advisor)
The master’s thesis deals with method of adaptive control of electrical drives. It aims at control of DC motor with using self tunning controller (STC) and gain-schedulink in simulative enviroment of MATLAB. The first part of the thesis deals with of basic methods adaptive control of electrical drives and with of basic identification methods, computation of controller parameters and control laws of controllers. The second part of the thesis is aimed at applying adaptive controllers to mathematical model of controlled system. Include monitoring parameters of identification The thesis contains originate programs include source files.
|
|
|
Audio speaker system with baffle made from alternative materials
Hüttl, Ondřej ; Schimmel, Jiří (referee) ; Kratochvíl, Tomáš (advisor)
This thesis firstly consists of an analysis and a description of materials suitable for construction of loudspeaker enclosures and a design of the loudspeaker system with the enclosure made of a synthetic stone. Electro – acoustics drivers have been described with a focus to a frequency range, a principle and a construction for an explanation of their function. Drivers based on electrodynamic principle have been described closely. An analysis of materials used for the loudspeaker enclosure production has been done and tradicional and alternative materials have been described as well. Specific modulus, density and stiffness have been taken as an objective evaluative criterion. An evaluation indicates appropriate properties of plastic, aluminum and stone based materials. The function and kinds of loudspeaker enclosures have been described. The function, properties and design of a vented box loudspeaker system have been described closely. The last part of this thesis is individual design of a two-way vented box loudspeaker system with the enclosure made of synthetic stone. A simulation of a driver behavior built in the enclosure and compensation circuits and crossovers design and simulation have been done. The enclosure has been designed with high stress to minimize negative effect of the enclosure to the final sound quality.
|
guest ::
