|
|
Polarization mode dispersion
Turský, Aleš ; Dostál, Otto (referee) ; Filka, Miloslav (advisor)
The work deals with dispersive effects of single mode fibers. We learn about the chromatic dispersion, the main attention is paid to the Polarization Mode Dispersion. We clarify the root cause origin of the Polarization Mode Dispersion describing parameters and its effect on transmitted data. Further on, the works dedicates to measure methods of the Polarization Mode Dispersion which is the interferometric method or the POTDR method. We explain the ways of the PMD removal at contemporary optic routes and options of PMD compensation by using compensators of various types. There is also mentioned the possibility of profiting from the soliton transmission. The last chapter deals with measuring of a real optic route. It includes measured data and its evaluation due to the ITU-T demands.
|
|
|
The Optical Link Error-Rate Determination
Joch, Antonín ; Kapoun, Vladimír (referee) ; Kyselák, Martin (advisor)
The master thesis discusses physical causes of light polarization and problems brought by nascence of Polarization Mode Dispersion (PMD). These problems occur especially by high speed systems on optical cable traces. The thesis deals with actuation of transmitted signal by influence of Inter Symbol Interference and it also deals with methods for its measuring and compensation. As a results of measurements are in text presented data provided by EXFO Electro-Optical Engineering Inc. Company. Significant part of the thesis focuses on optical link Bit Error Rate (BER) which is connected with Signal to Noise Ratio (SNR) and signal quality (Q-factor). Further on it is possible to find in text about so called eye diagram which is display mode that shows influence of communication channel on shape of the transmitted signal. To this diagram is related another one called constellation diagram which describes modulation mode and makes it possible to map dispersion of signal points around their nominal values. In connection with so called trajectory it makes vector diagram. Practical part includes depiction of these diagrams in MATLAB development environment.
|
|
|
The impact of polarization mode dispersion on error-rate of optical fibre link
Dorociak, Petr ; Křivánek, Vítězslav (referee) ; Kyselák, Martin (advisor)
Master’s thesis engages in the impact of polarization mode dispersion on optical communication system. Polarization mode dispersion is mathematically described by Stoke’s and Jone’s space and ensure the theoretic causes of the rise of polarization mode dispersion that are divided on the external and internal effects. On the basis of these effects grow up a differential group delay (DGD) which makes causes that individual polarization modes have between them a time delay and limitation of maximum bit rate. Then master´s thesis analyses the influence of the polarization mode dispersion on the pulse enlargement and on the modulation signal. In this work, there are described the most applicated optical modulation formats. Polarization mode dispersion has also influence on the bit error rate of optical fibre link and closing of eye diagram too. Eye diagram is used to view the transmission characteristics and diagnoses the channel errors. Eye diagram is connected with the definitions as a bit error rate (BER) and signal-to-noise ratio (SNR) that are explained in this work too. Following the gained experiences it was designed an useful graphic interface to display the effect of the polarization mode dispersion on the transmitted signal. Realization of the graphic interface is created in the program MATLAB. In Matlab-Simulink are created six models according to the kind of modulations with characteristic AWGN (Additive White Gaussian Noise) channel. Program was tested for a typical values. In all calculations it is counted only with the losses that are caused by the polarization mode dispersion. It is not calculated with the losses that are caused by a chromatic dispersion and attenuation. At the end of this work are evaluated all types of modulation formats depending on the polarization mode dispersion, optical fibre length, price and complexity of the realization. Atteined results of my master’s thesis are compared with two foreign articles.
|
|
|
Preparation of graphene samples for experiments under UHV conditions
Mareček, David ; Mach, Jindřich (referee) ; Čechal, Jan (advisor)
This bachelor thesis deals with electrical conductivity of a graphene sample and preparation of a graphene field-effect transistor. In the theoretical part of the thesis, we describe electronic properties of graphene, preparation of graphene by CVD and its transfer to SiO_2. Experimental part of this thesis is focused on the preparation of a graphene field-effect transistor with long distance between Source and Drain electrodes. Thesis deals with a design of a chip expander for contact of graphene in UHV conditions. The last part describes measurement of dependency of graphene layer conductivity on the gate voltage with emphasis on the position of Dirac point during adjustments of the sample in UHV conditions.
|
|
|
Modeling of surface waves
Zgabaj, Martin ; Haluza, Miloslav (referee) ; Franců, Jan (advisor)
This bachelor's thesis presents the derivation of basic characteristics of surface waves which includes the dispersion relation, the shape of the wave, the phase velocity, the group velocity and the movement of water particle. Thesis deals with both deep-water waves and shallow-water waves. Derived characteristics are examined in both cases. In the last part of thesis there are specific examples of those two types of waves.
|
|
|
Study of dispersion of carbon nanotubes in cement composites
Michnová, Kamila ; Hela, Rudolf (referee) ; Bodnárová, Lenka (advisor)
Carbon nanotubes have the ability to improve the mechanical and physical properties of cement composites. However, their introduction into industrial utilization is hampered by several obstacles. It primarily involves the effective incorporation into the cement matrix, health and ecological risks. The experimental part of the work deals with the dispersing carbon nanotubes in aqueous solution and their subsequent integration into the structure of the cement matrix.
|
|
|
Utilization of Nanofibres in the Traditional Ceramics Body
Sedláček, Daniel ; Stančík,, Hynek (referee) ; Sokolář, Radomír (advisor)
This thesis summarizes the current knowledge about ceramic composites with nanofibers. So far, most research focused on the reinforcement of hi-tech ceramics, such as carbides and nitrides, however, this traditional ceramics left behind. Due to the improving the efficiency of production of nanofibers and thus a drop in prices, companies consider their use even in a cheaper ceramic materials. Reinforcement of traditional ceramic shard could theoretically improve many characteristics, but there are absolute minimum of practical researches.
|
|
|
High-grade concrete using nanoparticles
Labaj, Martin ; Bodnárová, Lenka (referee) ; Hela, Rudolf (advisor)
The aim of this paper is to summarize and assess the possibility of using nanoparticles as additives in high performance concrete. These particles have the ability to improve the mechanical and physical properties of cement composites or even gave them brand new ones. Industrial use, however, is hampered by several obstacles. In particular, it is the task of effective incorporation of nanoparticles into the matrix, the health and environmental risks and, last but not least, the financial costs. The experimental part of the work deals with the first-mentioned problem, namely with dispersing carbon nanotubes in aqueous solution and their subsequent integration into the structure of cement mortar.
|
|
|
Ant food preferences (Formica genus) on the seeds with elaiosomes
ENGLICKÝ, Tomáš
The topic of the presented bachelor thesis is the determination of the ants g. Formica preference for specific seeds with elaiosomes. The ant dispersion of the seeds with elaiosomes is called myrmecochory. The theoretical part of this thesis describes the myrmecochory phenomenon in the context of the seed dispersal. The conclusion of the theoretical part evaluates considerable benefit of myrmecochory for ants and plants despite its disadvantages. The practical part of this thesis describes the experiment held with the intention to determine the preferences of the ants. The seeds with elaiosomes from five experimental plants were presented to the ants from two experimental anthills. Obtained data were processed into tables and graphs and subsequently evaluated. The results show that the ants prefer certain types of seeds. The cause for this preference is discussed.
|
|
| |
guest ::
