|
|
The creation of the job analysis by the picked military specialisation.
Kučerová, Martina ; Dědáková, Kateřina (advisor) ; Halberštát, Ladislav (referee)
Objektive of the thesis: The objective of this study is to get an overview of soldiers activities of the reconnaissance platoon of HQ company of 41st mechanized battalion, located in Ţatec. To try to confirm or refute the results of my bachelor thesis, in which I found out, that soldier in reconnaissance position needs mainly endurance for his work. Methods: Main used method is the analysis time frame and creation of characteristics of the given possition in the AČR. I will conduct by standardized tests for testing of motor skills. Results: Think out tests, that best reflect the activities of soldiers of reconnaissance platoon and to determine their level of motor skills. Setting the limits of tests of physical training for selection of candidates for the reconnaissance platoon. Key words: Description of occupational activities, professiography, motor skills, motor tests.
|
|
|
The study of rehabilitation of the selected sewer network
Cagášek, Radim ; Helcelet, Marek (referee) ; Raclavský, Jaroslav (advisor)
This work deals with the evaluation of the technological state of the sewerage network, as well as the subsequent method of remediation for each failure. The first part contains the accompanying report. This report includes information on the municipality in which the evaluation of the technical condition of the sewerage network took place. Next section includes the actual technical report which has data on the sewage network and its inspection. There are also information about the evaluation of the network‘s technical condition and viable ways of its rehabilitation. At the end of the section there are suggested possible ways of remediation for each of the detected failures. In the next chapter there are calculations for construction technical indicators and the calculation of the capacity of the sewerage network. The last section contains technical data sheet listing the faults of the individual sections and geodetic focus on manholes.
|
|
|
Geodetic documentation of actual shopping center area Vrbno pod Pradědem
Zušťák, Marek ; Sláma, Jiří (referee) ; Foral, Jakub (advisor)
This bachelor works is deal with the creation of the geodetic documentation of actual construction. In this work is described in detail the process of surveying works from preparation, through the mapping work on the construction, computer work until after completion of all parts of the geodetic documentation. The aim of this work is preparation of thematic map of the new shopping center in Vrbno pod Pradědem.
|
|
|
Survey and Diagnostics of Building Construction
Resl, Jaroslav ; Cikrle, Petr (referee) ; Anton, Ondřej (advisor)
The thesis is focused on the overview of the diagnostic methods for engineering surveys reinforced concrete constructions. The practical part explains engineering surveys of industrial building, evaluation of concrete strength on existing building and results from search reinforcements on individual elements. Next part is focused on load testing precast floor slab removed from construction and evaluation load capacity. The last part include structural design of elected parts (precast floor slab and beam).
|
|
|
The Certification and The Addition of Minor Control in Cadastral Districts Lesná (Brno)
Rokytenský, Ondřej ; Kuruc, Michal (referee) ; Fišer, Zdeněk (advisor)
This bachelor's thesis discusses the certification and the addition of minor control in cadastral district Lesná (Brno). This work consists of two parts - theoretical part deals the main notions related with the discussed theme and practical part describes the revision itself. This was implemented by reconnaissance, when the points were found and checked. The accuracy and homogeneity of minor control was tested at adequately chosen distance among points. State of positional geodetic field containing numbers of found, not found, damaged, destroyed or not checked points was statistically evaluated. In appendices of this thesis are e.g. photos of points or filled in relevant forms.
|
|
|
Measurement and creation of the thematic map for a check in the locality of Brno – Havlíčkova street
Ptáček, Pavel ; Knězek, Tomáš (referee) ; Foral, Jakub (advisor)
The objective of this thesis is creation of the thematic map of planimetric situation for a defined part of the Havlíčkova street. The objects of measurement are communication, accessible buildings and surface signs of utilities. The initiator of thesis is Brno City Hall. Emphasis is given to detail and quality measurement planimetry and altimetry. The thesis describes all the steps creation of thematic map from reconnaissance through completion point fields, the measurement and processing, to final check accuracy. Results of this thesis can be used to update digital maps of the Brno and confrontation with the previous data.
|
|
|
Measurement and creation of the thematic map for a check in the locality of Brno – Havlíčkova street
Ptáček, Pavel ; Knězek, Tomáš (referee) ; Foral, Jakub (advisor)
The objective of this thesis is creation of the thematic map of planimetric situation for a defined part of the Havlíčkova street. The objects of measurement are communication, accessible buildings and surface signs of utilities. The initiator of thesis is Brno City Hall. Emphasis is given to detail and quality measurement planimetry and altimetry. The thesis describes all the steps creation of thematic map from reconnaissance through completion point fields, the measurement and processing, to final check accuracy. Results of this thesis can be used to update digital maps of the Brno and confrontation with the previous data.
|
|
|
Survey of the actual state of the building as a basis for reconstruction
HLÁSEK, Petr
My topic of my thesis was the survey of the actual state of the building as a basis for reconstruction. Surveying the actual state took place in the South Region in Pisek, cadastral surveying 720755. As a building, I chose the bridge of Fráni Šrámka no. 20-069 on the road I20 / E49 connecting regional cities Ceske Budejovice and Plzen, spanning the Otava River. The focus of the bridge was necessary due to poor technical condition of the bridge equipment, their influence there was water leaking into the supporting structure of the bridge. The aim was to focus the actual condition of the bridge, and planimetry and altimetry a scale of 1: 250. Before focusing bridge was necessary reconnaissance current point field. After reconnaissance followed selection and stabilization of new auxiliary points for orientation. The focus of the bridge was used Leica Total Station TCRM 1205 R300. Based on focus were drawn and computer graphic work. The building was targeted in a coordinate system S - JTSK a vertical system Bpv.
|
|
|
The Present Course of the Proces of Beatification 14- Franciscan Brothers of Our Lady of the Snou in Prague
HOŠKOVÁ, Jana
The work considers the history of beatificational process of 14 venerable Franciscan sufferers from the Panna Marie Sněžná church in Prague from the year 1611. There lived a community of Franciscan, who came from several states of Europe in the time of Rudolf II. reign. They made there a community of service and prayer. By attack of army from Passau in November 1611 were these brethren killed by Protestants and poor people. The monastery and church were destroyed. Gradually was the convent restored and new monkery came. The bretherns started to gather background for beatificational process of their killed brethrens. The process started in 1677 first, then in 1698 there was a second process and the next process was in 1947. Because of the lack of financial resources and beacause of the political changes were all processes stopped. The last process which started in 1994, still proceeds.
|
|
|
ARGOS-ORPHEUS - systém pro vzdálené ohledání nebezpečných prostředí
Žalud, L. ; Matoušek, Rudolf
Orpheus mobile robot is a teleoperated device primarily designed for remote exploration of hazardous places and rescue missions. The robot is able to operate both indoors and outdoors, is made to be durable and reliable. Orpheus robot contains multitude of sensors including cameras, 3D proximity scanners, thermometer, etc. The device is controlled trough advanced user interface using ARGOS software with joystick and head mounted displey with inertial head movement sensor.
|
guest ::
