|
|
The roofing of a railway station
Olbert, Jan ; Šmak, Milan (referee) ; Puchner, Josef (advisor)
The goal of this thesis is structural design of railway station lobby steel roofing. The construction dimensions are 63,0 m x 300,0 m with height adapted for railway vehicles traffic according to ČSN 73 6320 technical standard. The two-bay hall cross coupling consists of lattice trusses mounted on restrained columns. Axial spacing between individual bonds is 4,0 m. In the longitudinal direction the stability of articulated columns is secured by truss bracing placed in the roof and walls.
|
|
|
Velodrom
Horký, Rostislav ; Pilgr, Milan (referee) ; Štrba, Michal (advisor)
Diploma thesis deals with desing and static assessment of supporting steel roof structure of velodrom. Climatic load is determined for location of city Znojmo. The thesis consists of technical report with comparison of 2 options solution, technical report of chosen variant, static report of main supporting parts and chosen connections, bill of materials quantities and drawing documentation. Computational model for evaluation of internal forces is realized in SCIA ENGINEER 17.01 software. Static report is created manually according to valid European standards.
|
|
|
The roof structure of a storage area
Kuběna, Kamil ; Sýkora, Karel (referee) ; Puchner, Josef (advisor)
My task was to design and consider the carrier of steel structures for roof storage area in Brno, so that the structure meet all the requirements for buildings and fulfill its function. Roofing, with grand-plan dimensions 50 x 20 m clear height of 4,5 m. Cross sections of the main elements were proposed and considered and also selected joints and details of the structure. Assigned drawings are included in attachments of the thesis.
|
|
|
Sports hall
Hellebrand, David ; Puchner, Josef (referee) ; Sýkora, Karel (advisor)
This bachelor’s thesis deals with a project of roof load-bearing structure of a sports hall situated nearby the city of Opava. The sports hall would be designed for common sports such as handball, football, tenis, voleyball or basketbal. Groun plan scantlings of the con-struction are of 36 x 48 m and clearance of 8 m. Hall travers bond is composed of 3 m high lattice frames that are hinge-connected to a housed joint. Accouplement between the sup-porting lattice frames is done due to longitudial effective purline which continue to the wall-mounted parts of the structure. Spatial rigidity is made safe due to sway bracings and purline.
|
|
|
The Steel Structure of a Hangar
Růžičková, Markéta ; Pilgr, Milan (referee) ; Štrba, Michal (advisor)
The purpose of this dissertation is to take into consideration the design and the steel structure assessment of the hangar for small propeller aircraft type Cessna. The platform dimensions are 40,0 by 60,0 metres. Headroom is around 10,0 metres. The object’s location is in Brno. The main structural material is steel S355J2. There are two initial geometric alternatives, in other words structural modifications of desired solution. These are spatial truss arc tie beam and garland tie beam. The two alternatives were tentatively designed according to their dimensions and the main supporting elements of both alternatives were also assessed and considered. The alternatives were finally evaluated and one option was selected for detailed processing. In turn of the chosen option, there had been drawing of detailed analysis of the main load bearing parts of the construction with joints and some other details included. Furthermore there is drawing documentation and supervisor’s technical report attached. The valid standards CSN EN were used in processing of this dissertation.
|
|
|
Trade House in Brno
Serbousková, Kateřina ; Sýkora, Karel (referee) ; Barnat, Jan (advisor)
The final thesis deals with the design of the steel loadbearing structure of the shopping center situated in Brno. The built-up floor area is 1973 m2 (L-shaped ground plan with dimensions 48 m x 50 m). The construction consists of three parts. Building A has four above-ground floors and reaches a height of 25.5 m. The steel structure of mono-pitched roof is designed in two options. Both options consist of full-length purlins and truss girders. Building B is a single-storey building with a mono-pitched roof top reaching 8.1 m high. Building C is three-storey with a flat roof. The first floor has a construction height of 4.5 m and the remaining two floors reach height of 3.6 m, which coincide with building A. The steel structure is made of steel-concrete composite ceilings and pin-supported columns. In the case of bracings, pressure was eliminated by means of non-linearities.The work includes proposal, assessment of the supporting structure and calculation of the directional details. Internal forces were determined based on a static analysis in the SCIA Engineer calculation program.
|
|
|
Industrial building
Michálek, Vojtěch ; Pilgr, Milan (referee) ; Sýkora, Karel (advisor)
In the bachelor thesis a project for steel construction of an industrial hall in Brno area is developed. The extent of the ground plan of the hall is 30x63m with maximum height of 17,300m. The main load-bearing structural elements such as suspended purlin, truss bond timber, noggin pieces, solid-poles forming a cross linking with the bond timber, base and crane runway, are designed and considered in the static calculation. The statement of material and design documentation consisting of the design, cross-section, production drawing of a bond timber and selected details are part of the thesis.
|
|
|
Multi - Purpose Sports Hall
Baudišová, Monika ; Bajer, Miroslav (referee) ; Sýkora, Karel (advisor)
This thesis deals with design of a multi-purpose sports hall. The aim of this work is to design a support structure with a diameter of 80.0 m at ± 0.000. Construction of a circular layout in the level of ± 0.000 of an external diameter 80.0 m. Height of the hall at the top is 20.0 m Indoors girders is solved in 36 beams which meet at the middle of the rings. Ensure the stability of bracing. Anchoring is done by pin connections located at the bottom of the strip, anchored in concrete bases through the base plate and pre-concreted anchor bolts.
|
|
|
The steel roof structure of a tennis hall
Šašinka, Jakub ; Barnat, Jan (referee) ; Štrba, Michal (advisor)
This bachelor thesis describes the design and assessment of steel structure of the roofing of the sports hall. The supporting structure of hall is 20.00 meters span, 39.80 m length and 11.99 m height. Main construction material is steel, grade S235. There were done 3 possible variants of the hall, from which one of them was calculated in detail. It is prepared by static analysis of the main load-bearing parts of the structure, including joints and details. The supporting structure of hall consists in the transverse direction from the curved spatial lattice structure made of steel circular tubes.
|
|
|
The roof structure of a multipurpose sport hall in Brno
Grussmann, Jan ; Pilgr,, Milan (referee) ; Šmak, Milan (advisor)
Bachelor´s thesis describes the design and static assessment of the main roof structure supporting elements of the multipurpose sport hall in Brno. It is the emphasis on the optimization of the proposal in terms of material consumption. Curved girders made of glued laminated timber and on the edge connected rafters forms together the cross-link structure. Basis of OSB sheathing carrying the roof deck is secured by the orthogonal grid system purlins and rafters. The static calculation also includes fire resistance reports of single elements.
|
guest ::
