|
|
Apartment house Uhřice
Gajárková, Marie ; Skřeková, Tereza (referee) ; Petříček, Tomáš (advisor)
The aim of bachelor thesis is to elaborate the project documentation for realization of new apartment house located in the village Uhřice. The designed apartment building is located in the village of Uhřice which belongs to the cadastral area of Kyjov. The three-storey building is located on the outskirts of the village, near the forest in a sloping terrain. There is also a parking lot for five cars on the site. On the first floor, there is a garage for five more cars, technical room, cellar, utility closet, and baby carriage room. The apartment building is designed with five residential units, designed as one-bedroom, two-bedroom and three-bedroom apartments. The building is designed on foundation strips and footing. The exterior masonry on the first floor is made of lost formwork and, on the other floors, it is made of ceramic blocks. The ceramic blocks are also used for load-bearing internal masonry. The interapartment masonry is made of acoustic blocks. Reinforced concrete was chosen to construct stairs and ceiling structures. The roof structures are single-skin flat roofs. The lower roof serves as a terrace, the other is covered with aggregate
|
|
|
Residential Building
Pastorková, Gabriela ; Mocová, Pavla (referee) ; Mohelníková, Jitka (advisor)
The aim of the Bachelor thesis is to complete the project documentation for the implementation of the residential building. The building has thirteen residential units and consists of four storeys and one underground floor. The building is located in the cadastral area of Brno-Komín in a quiet area. The main entrance is located on the north side of the plot and it is barrier-free. Vertical communication is ensured by a two-arm staircase and an elevator. From the common corridor, there is an entrance to the individual housing units. In the basement there are 13 cellars, utility room, toilet and facilities for a cleaning. On the first floor there is the main entrance to the building, including mailboxes, a bell and the entrance to the pram and bicycle room. From the stairwell, where there is also an elevator, there are three residential units (2x 2+kk and 1+1), one apartment is designed as accessible flat. On the second and third floors there are four residential units (2x 1+1 and 2x 2+kk). On the fourth floor there are two residential units sized as 4+kk. The two-way wall structural system is made of ceramic blocks (in the basement – pre-cast pernament formwork). The whole apartment building is insulated with the contact thermal insulation system (ETICS). The building is based on strip foundations made of plain concrete. The ceiling structure is made of monolithic reinforced concrete slabs and the whole building is roofed with a warm flat roof.
|
|
|
Apartment Building
Vrbický, Jan ; Kučírek, Pavel (referee) ; Struhala, Karel (advisor)
The aim of this bachelor’s thesis is to process project documentation for realization of new apartment building as a nearly zero-energy building in the city of Brno in the cadastre unit Líšeň. The apartment building is a two-storey with a basement in a sloppy terrain. It’s a rectangular shaped building and it has character of a terraced house. On both above-ground floors is an entrance area and 3 residential units. There are 6 residential units in the whole building. In the basement is a vault for every residential unit, utility room, bicycle room, cleaning room, WC, storage, and a gaming room. The basement is also linked to a garage with 6 parking places under the building. The garage is completely open from one side, and it is linked to an exterior parking lot with another 7 parking places. The vertical load bearing system in the above ground floors is made of sand-lime blocks, as well as non-load bearing walls in the above ground floors. Peripheral walls in the basement are made of a concrete permanent formwork and a monolithic reinforced concrete. The horizontal load bearing ceiling structures are made of reinforced concrete slabs. Foundations are designed as plain concrete strips except for two reinforced concrete blocks under the reinforced concrete columns. The roof is designed as extensive green flat roof. The building is insulated with the contact thermal insulation system ETICS made of façade polystyrene with an external above-ground wall finish made of brick cladding.
|
|
|
Apartment building, Rajhrad
Korábková, Adriena ; Galata, Jindřich (referee) ; Müller, Jan (advisor)
The subject of the bachelor´s thesis is the design of an apartment building in a built-up area of Rajhrad, district Brno – venkov, Jihomoravský kraj. It is a fourstorey building (1 underground floor and 3 above-ground floors), equipped with a combined load-bearing system. A total of 11 residential units are designed in the building, of which 1 residential unit is designed for people with reduced mobility and orientation. This apartment is located on the first floor and includes a private garden. The other housing units have a balcony. The load-bearing masonry will be made of sand-lime masonry elements, on which monolithic reinforced concrete ceilings will be laid. The building will be insulated with the ETICS contact thermal insulation system. Facade colors will be chosen in shades of white and light brown. The facade will be complemented by a stone cladding in a light brown shade. The building has an elevator and a reinforced concrete staircase.
|
|
|
Retirement home
Juríková, Veronika ; Utíkal, Aleš (referee) ; Utíkalová, Ivana (advisor)
The diploma thesis deals with a new building of retirement home. This thesis aims to elaborate a project documentation for the construction of the building. It is a self-standing object on a flat land. The retirement home has one underground floor and three above ground floors. On the underground floor there are the retirement home’s technical equipment and warehouses. On the ground floor there are public services: patisserie and café, hairdresser, dining room. The first floor and the second floor are designed for the accommodation of seniors in single and double apartments. There are also a common room and retirement home’s equipment. The bearing construction consists of ceramic masonry of thickness 300 mm and reinforced concrete columns. The masonry and the columns are based on a concrete bases and concrete beads. The retirement home is roofed with a mono-pitched roof. The object is insulated by a contact thermal insulation system.
|
|
|
Small apartment building
Konečný, Patrik ; Žajdlík, Tomáš (referee) ; Šuhajdová, Eva (advisor)
The subject of this bachelor's thesis is a proposal for the elaboration of project documentation for an apartment building for a building permit and construction. The considered area for the proposed building is a system of plots in the cadastral area of Sadová in Brno (South Moravian Region). It is a partially basement building with three floors, which is located on a slight slope. The building has 12 residential units of various layouts, of which one apartment is adapted for people with disabilities. The apartments have loggias, balconies or terraces, which provides an above-standard view of the surroundings. The building also has an outdoor parking spaces. Lime-sand bricks are designed as load-bearing and non-load-bearing masonry, and monolithic reinforced concrete ceilings are designed. The building will be insulated using the ETICS contact thermal insulation system. Facade colors will be chosen in shades of white and gray. The building also has an elevator and a reinforced concrete staircase.
|
|
|
The block of flats
Tylčer, Radim ; Skřek, Daniel (referee) ; Benešová, Romana (advisor)
The subject of this bachelor thesis is project documentation for the new construction of an apartment building in Domašov u Brna. It is a partially basement building with three floors. In the basement there is a common recreation area, technical rooms and cellars of individual housing units. On the first floor there are two apartments with a size of 3 + 1 and one apartment with a size of 2 + 1. These apartments are complemented by an outdoor terrace with a front garden. In the rest of this floor there is a cleaning room, a common room and a bicycle shed. The second floor is similar to the first, but instead of common areas there is one more 2 + 1 apartment. The apartments on the second floor are complemented by balconies. On the third floor there are two apartments 4 + kk and they are complemented by terraces situated to the west. It is a brick building made of THERM ceramic blocks. The construction system is mixed and based on foundations strips. Ceiling structures are designed as monolithic ceiling slabs. The roofing is designed as a single-skin flat roof structure. The building is also equipped with an elevator and wheelchair access. In front of the building there are twenty-four outdoor parking spaces, one of them is for people with reduced mobility. Access to the building is possible through paved areas. The whole building is insulated with the ETICS system. Facade colors are designed in shades of white and gray with anthracite fillings of openings.
|
|
|
Apartment Building
Vrbický, Jan ; Kučírek, Pavel (referee) ; Struhala, Karel (advisor)
The aim of this bachelor’s thesis is to process project documentation for realization of new apartment building as a nearly zero-energy building in the city of Brno in the cadastre unit Líšeň. The apartment building is a two-storey with a basement in a sloppy terrain. It’s a rectangular shaped building and it has character of a terraced house. On both above-ground floors is an entrance area and 3 residential units. There are 6 residential units in the whole building. In the basement is a vault for every residential unit, utility room, bicycle room, cleaning room, WC, storage, and a gaming room. The basement is also linked to a garage with 6 parking places under the building. The garage is completely open from one side, and it is linked to an exterior parking lot with another 7 parking places. The vertical load bearing system in the above ground floors is made of sand-lime blocks, as well as non-load bearing walls in the above ground floors. Peripheral walls in the basement are made of a concrete permanent formwork and a monolithic reinforced concrete. The horizontal load bearing ceiling structures are made of reinforced concrete slabs. Foundations are designed as plain concrete strips except for two reinforced concrete blocks under the reinforced concrete columns. The roof is designed as extensive green flat roof. The building is insulated with the contact thermal insulation system ETICS made of façade polystyrene with an external above-ground wall finish made of brick cladding.
|
|
|
The block of flats
Tylčer, Radim ; Skřek, Daniel (referee) ; Benešová, Romana (advisor)
The subject of this bachelor thesis is project documentation for the new construction of an apartment building in Domašov u Brna. It is a partially basement building with three floors. In the basement there is a common recreation area, technical rooms and cellars of individual housing units. On the first floor there are two apartments with a size of 3 + 1 and one apartment with a size of 2 + 1. These apartments are complemented by an outdoor terrace with a front garden. In the rest of this floor there is a cleaning room, a common room and a bicycle shed. The second floor is similar to the first, but instead of common areas there is one more 2 + 1 apartment. The apartments on the second floor are complemented by balconies. On the third floor there are two apartments 4 + kk and they are complemented by terraces situated to the west. It is a brick building made of THERM ceramic blocks. The construction system is mixed and based on foundations strips. Ceiling structures are designed as monolithic ceiling slabs. The roofing is designed as a single-skin flat roof structure. The building is also equipped with an elevator and wheelchair access. In front of the building there are twenty-four outdoor parking spaces, one of them is for people with reduced mobility. Access to the building is possible through paved areas. The whole building is insulated with the ETICS system. Facade colors are designed in shades of white and gray with anthracite fillings of openings.
|
|
|
New apartment building
Křičenský, Adam ; Svoboda, David (referee) ; Čuprová, Danuše (advisor)
The subject of the bachelor’s thesis is the processing of the design documentation for execution of an apartment building. Designed building is located in Hrochův Týnec. The access to the building is from the south. The plot is flat and it disposes with parking places for nineteen cars. It is a building with three above-ground floors and partial basement that is designed with a total 8 dwelling units. The structural system of the designed building is wall system. All vertical structures are made of clay brick. The exception are external walls in the basement, that is designed of concrete blocks (permanent formwork). The horizontal structures are designed of prefabricated rib-and-filler floor that is made of ceramic concrete ceiling beams, ceramic inserts and overconcrete. The conection structure of the building is the cast-in-place reinforced concrete staircase. The roof is designed as a green flat roof in combination with the walkeble flat roof. The roof above the stairwell is designed as a non-walkeble flat roof. The thermal insulation of the whole object is made of the ETICS certified contact thermal insulation system. The apperance of the building is completed by facade colours that are selected in shades of white, light gray and dark gray.
|
guest ::
