|
|
Multifunctional house Lignum
Jakubčánin, Marek ; Šteffek, Libor (referee) ; Ostrý, Milan (advisor)
The diploma thesis focuses on a mixed-use building with a rectangle-shaped ground plan in Žilina city. The object is four-storey and with no basement. It is split into two sections. The first one provides a space for three operations in northeastern part of the first floor with an attached parking lot. These operations are not further described in this project and depending on investor´s requirements some changes may apply. The second part is an apartment housing section. The first floor contains utility rooms such as storage and buggy room. The housing sections are accessible with two entrances. The apartments are located from the second up to the fourth storey and are designed 1+KK, 2+KK,3+KK and 4+KK respectively. The apartments are assigned with parking spaces isolated from operations parking lot. Vertical bearing walls are made of clay blocks POROTHERM 30 AKU P+D, which are used also as internal bearing party. Internal bearing walls placed in apartments are made POROTHERM 25 AKU P+D and completed by POROTHERM 14 PROFI P+D. Walls will be placed on conrete and reinforced concrete strip foundation. Building has external thermal insulation made by EPS gray 200mm thick. Horizontal load-bearing structures are made by reinforced concrete. Object has flat roof with minimum slope 3%. Damp proof is made by PVC-P membrane. As thermal insulation is used mineral wool.
|
|
|
Apartment building
Hudeček, Vladimír ; Vorlíčková, Petra (referee) ; Kolář, Radim (advisor)
The aim of the bachelor’s work is a composition of project documentation for the construction building of apartment building. The object is situated on the cadastral area of Slavkov u Brna on plot number 354/147. The apartment building is designed as separated, partition in three parts. Four storey part without basement and two parts with basement. There are ten apartment units. To each apartment unit belong one basement cellar. There is one parking area with fifteen parking places in total. The building stands on foundation strips. The construction system of the object is wall system. External walls are made of Porotherm brick blocks with thermal insulation from mineral wool. The inside vertical load-bearing constructions are made of acoustic brick blocks with mortar pockets. The horizontal load-bearing constructions are made of reinforced concrete slabs. The building is roofed with single layer flat roof.
|
|
|
Apartment building on a sloped site
Bednář, Jiří ; Bečkovská, Tereza (referee) ; Bečkovský, David (advisor)
The aim of my master's thesis is a project of a new apartment building on a sloped site at a level of the documentation for the structure realization. The building is partly basement with four above-ground floor. Individual floors up recede and are roofed with flat roofs. The structural system of the basement part is made up of permanent shuttering and the above-ground part is made up wall of cross laminated timber construction panels KLH. The project of the building is in accordance with the development plan of Kopřivnice and with the current street built. The work puts great emphasis on layout including security of the construction in terms of statics, architecture, energy savings and safety at utilizing the structure.
|
|
|
Family House with workroom
Lipusová, Noemi ; Potužník, Michal (referee) ; Mátl, Miroslav (advisor)
The subject of this bachelor´s thesis is processing of building – technical part of project documentation for realization of new building of family house with workroom in town Třinec. Family house has two above-ground floors a two shed roofs. House is designed for a family of four. The establishment (hairdresser‘s) has a shed roof. The building is designed as a wall construction system (Porotherm). The project will also include the parking lots and pavements.
|
|
|
Object of civic amenities
Hasoň, Václav ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
The diploma thesis elaborates on the design of a new building of freestanding retirement home in the town of Litomyšl. The design of the retirement home is in the form of project documentation for the construction. The new building includes a partial basement and three floors. The main purpose is to build a building for housing with flats for seniors and to provide health care to seniors living here and from the surrounding area. On the 1st floor, there is an administrative part, a doctor's office with the possibility of rehabilitation and a dining room with facilities for food preparation, which is imported into the home. The dining room serves both the guests and the public. The remaining part of the first floor consists of social, administrative and utility rooms. On the 2nd and 3rd floors, there are individual apartments for clients with a common room for visits and spending their free time. On the 1st floor, there is a maintenance center, boiler room, server room, furniture store, and estate depository. Basement walls are monolithic, made of reinforced concrete. The construction system of the above-ground floors is wall-mounted, bidirectional and made of ground brick blocks. The ceilings and staircases are monolithic, made of reinforced concrete. External walls are insulated with a contact thermal insulation systems. The building is mainly based on footings or foot anchors. The retirement home is located on the edge of the town near the Litomyšl Hospital. The land is suitable for construction, as it is located in the area for the construction of civil buildings.
|
|
|
Sports centre
Nováček, Petr ; Bartolšic, Vít (referee) ; Matějka, Libor (advisor)
The theme of master’s thesis is the newly built sports center in Rosice. This work aids to develop design documents for building construction. The building is partial basement, four-storey. The building is designed of systém Heluz with cast-in-place reinforced concrete floors. The roof construction is single-flat, over part of the building is composed of timber truss Gang-nail. In the building there is the bar with bowling alley, squash, small multipurpose sports hall, fitness room, table tennis and spinning. In the basement are designed three saunas. Tennis courts with playground are outside next to the building.
|
|
|
Flat house SNP
Líner, Ondrej ; Pilný, Ondřej (referee) ; Kolář, Radim (advisor)
The goal of the bachelor’s thesis is the elaboration of project documentation for a newbuilt flat house in Turčianske Teplice. Flat house is designed as four-storey, non-basement building, which houses a total of 15 residential units. The building has a wall construction system made of THERM type ceramic blocks. The ceiling structures are made of reinforced concrete monolithic slabs. The individual floors are connected by a two-arm staircase and a barrier-free elevator. The roofing of the building is designed as a single-skin flat roof. Insulation of the building is provided by an external thermal insulation composite system made of mineral wool.
|
|
|
Family house with an establishment
Niedoba, Andrzej ; Bartoš, Tomáš (referee) ; Utíkalová, Ivana (advisor)
This project designs a new building of family house with an establishment as a separate object. Family house is single-storey with residential attic, without a basement and with a gable roof. The establishment (hairdresser) has a shed roof. The building is designed as a wall construction system (Porotherm) with a contact thermal – insulation system. There is a garage located among theese objects. The project will also include the parking lots and pavements.
|
|
|
Boarding house u bobule
Buršíková, Petra ; Spáčil, Miroslav (referee) ; Sedláková, Markéta (advisor)
The aim of the bachelor’s work is composition of project documentation for the construction building of boarding house. Object is situated on the cadastral area of village Kubšice, number of building plot is 30/7. Terain is slightly sloping. The pension has two above-ground and one underground floor. In the basement there are technical rooms. On the upper floors there are guest rooms and a restaurant with facilities. The construction system of the building is a wall system. The perimeter basement walls are made of concrete blocks of lost BEST formwork embedded in concrete. The other perimeter and interior walls are made of Heluz ceramic blocks. The building is designed to be insulated with an Etics contact facade made of mineral insulation from stone fibers. Horizontal ceiling structures and stairs are monolithic. The roof of the building consists of a sloping roof. There are 32 parking spaces on the plot.
|
|
|
Detached house, Sovinec
Pavela, Martin ; Žižka, Lukáš (referee) ; Bečkovský, David (advisor)
The aim of my bachelor´s thesis is design of dispositions and structural solution for family house in (municipality) Sovinec at the level of documentation for construction. The object is located on the northern slope. It is two-story detached building with basement. (Layout of basement garage exceeds from the first floor plan and because of this maximally exploit the possibilities of the building parcel). Structural system of the basement consist of stay-in-place formwork. The first and second floor is made of wooden frame construction. The basement is covered with intensive green roof. This roof is supported by prefabriceted reinforced concrete Spiroll panels. The rest of house has pitched roof and loadbearing part of this roof is in form of modern sliding collar. The object architecturally fits into the surrounding landscape and it is designed according to the plan of the municipality Jiříkov.
|
guest ::
