|
|
Architectural lighting and desing particularity
Haluza, Miroslav ; Maixner, Tomáš (referee) ; Baxant, Petr (advisor)
The goal of this thesis is make a list of theoretic routes outside (architectural) lighting and draw up accessible light fitting. Further are in those work included principle for handy suggestion architectural lighting after technical norms and practical recommendationthat the is necessary at projection hereof lighting adhere. Last but not least is here mentioned problems installation and upkeep architectural lighting and safeness and immunity electric arrangement.
|
|
|
Design of lighting system in car service
Borůvka, Jan ; Štěpánek, Jaroslav (referee) ; Škoda, Jan (advisor)
The theoretical part is focused on lights, notions and calculations in the area of light technology, basic lightning sources and lamps. This work is also about the principle of lightning measuring. The main aim of the work is design of a new artificial lightning system in a workshop which is located in village called Petrov. At first, the control measuring of existing lightning was done which is mentioned in this work.
|
|
|
Off-grid street lamp design.
Hampl, Petr ; Karásek, David (referee) ; Křenek, Ladislav (advisor)
Oblast problémů, ze kterých konkrétní téma projektu vychází, zahrnuje současnou globální transformaci zdrojů energie a jejich dodávek se zvláštní pozorností na obnovitelné zdroje energie. Důraz je kladen zejména na hodnoty jež přináší produkt určený k užívání ve veřejných prostorách. Autorovým zadáním bylo navrhnout osvětlovací jednotku nezávislou na vnějším zdroji napájení. Cílem návrhu je přehodnotit způsob, jakým jsou dnes technologie využívání sluneční a větrné energie běžně používány, a navrhnout řešení přinášející nové vlastnosti a užitné hodnoty pro přímého uživatele i celou společnost. Autor přináší návrh produktu jenž je reakcí na současné globální hrozby a příležitosti. Výsledkem projektu je návrh pouliční lampy kombinující fotovoltaický článek a větrnou turbínu s cílem získat elektrickou energii jež je dočasně akumulována a následně dodávána svítidlu. V návrhu je kladen důraz na požadavky ergonomie a estetickou hodnotu produktu. Navržené řešení znamená finanční přínos z hlediska šetření neobnovitelnými zdroji energie a případnými finančními výhodami pro investora plynoucími z provozování veřejného osvětlení. Pouliční lampa nezávislá na vnějším zdroji napájení má navíc menší negativní dopad na životní prostředí a představuje technologie využívání větrné a solární energie v přívětivé a nerušivé podobě.
|
|
| |
|
| |
|
|
Analysis and Innovation systems of Vehicle Lighting
Straka, Ondřej ; Grmela, Petr (referee) ; Hájek, Vítězslav (advisor)
ubject semestral project is diagnosis primary objective luminosity plus elaboration background research primary objective plus modern waies lighting. Work includes indicative allocation light fitting, systems plus possibilities increasing safeness on roads by using modern systems facilitating movement and behind handicap. Are here also circumscribed systems facilitating visibility in night o'clock plus manners realization of all these systems.
|
|
|
Analysis of Electric Power Consumption of Public Lighting
Varmuža, Jan ; Pavelka, Tomáš (referee) ; Paar, Martin (advisor)
The thesis deals with analysis of the public lighting system from the point of view of light sources and luminaries. It focuses on the specifics of the lighting systems such as lighting for pedestrian crossings or decorative lighting. It analyzes the energy consumption depending on daylight and how it manifests a shift sunrise and sunset on the consumption of electricity. The work clarifies how the model can be simplified sunrise, sunset for the entire Czech Republic. Based on the distribution of municipalities with population over 10,000 and modeling of sunrise and sunset calculation is carried out power consumption of lighting systems and compared to the total consumption of the Czech Republic. Simplification is an estimate of the consumption of electricity to villages to 10 000 people on the basis of the estimate, the final consumption of electricity for public lighting for the entire Czech Republic.
|
|
|
Production of ceiling light
Kvasnička, Jan ; Řiháček, Jan (referee) ; Císařová, Michaela (advisor)
The manufactured component is the inner part of the ceiling lamp. It is made of 17 240 steel in a series of 100 000 pieces/year. A combination of tool cutting and deep drawing without thinning the wall was chosen from the possible production technologies. The diameter of the blank from which the resulting shape is pulled out was calculated to be 400 mm. It will be cut from an unwound coil of sheet metal, the inner diameter of which is 400 mm and the outer 1000 mm. A drawing tool was designed for forming and it's functional parts were made of 19 436 steel. The tool is placed in hydraulic three-acting press PO 160/100 from company Dieffenbacher. The press is part of a line which includes an unwinding device, a straightening device and a cutting tool.
|
|
|
Svítidlo do interiéru
Do, Bao Nhi
The bachelor's thesis deals with the design and construction of a decorative interior lighting created using CNC laser technology. The theoretical part of the thesis briefly describes the physics of light, light sources and their parameters, lighting requirements and the effect of light on human health and sleep. The research shows the current design of the lights with the chosen restriction – the use of the wood veneer in the construction of the shade. The work describes the chosen technology for lightshade production – CNC laser cutting. The practical part describes the entire design process of creating the lamp design from the initial inspiration, sketches and drawings to the production of the final product.
|
|
|
Design of a reference luminaire
Cikryt, Adam ; Baxant, Petr (referee) ; Škoda, Jan (advisor)
The master's thesis deals with the design and manufacturing of a reference luminaire for use in lighting laboratories. In the design of the luminaire, simulations in Ansys Speos are used to assess the luminaire's lighting properties. The designed luminaire is manufactured using 3D printing and assembled. The light technical properties of the luminaire are determined by measurements in lighting laboratories.
|
guest ::
