|
|
Shopping mall in Brno
Brozmanová, Dagmar ; Horáček, Martin (referee) ; Pešek, Ondřej (advisor)
The aim of the diploma thesis is to design and assessment of the steel structure of shopping mall, which is situated in Brno. Three variants were processed, from which one was selected for more detailed processing. Variants have hexagonal floor plan with maximum dimension 60,0 m, four floors and same structural solution. They differ in plan of secondary beams and columns, in floor plan of glass atrium and used cross-sections. Building´s load-bearing structure consists of pin-supported columns, primary beams, secondary beams and purlins. Rigidity of the structure is enshured by system of vertical bracings and in horizontal direction by composite slab. The structure elements are made of steel S355, except secondary beams, which are made of steel S235.
|
|
|
Design of the reinforced-concrete structure of the production building
Vavřiníková, Denisa ; Vašátko, David (referee) ; Girgle, František (advisor)
The subject of this bachelor thesis is a proposal and assessment cast-in-place reinforced slab object manufacturing in three options. Frist option is a slab with beams and variable load 5 kN/m2. Second option with enlarged load 20 kN/m2. Floor slab in this geometry isn´t capable to transfer the load that is why third option is calculated. Third option is primary beams and added longitudinal secondary beams. The construction is proposed for ultimate limit state in compliance with ČSN EN 1992-1-1. To calculate the internal forces, three 3D modules were created in software SCIA Engineer. The result of this these are three structurals designes and drawnings.
|
|
|
Storage hall with administrative part
Žáček, Libor ; Barnat, Jan (referee) ; Štrba, Michal (advisor)
The subject of the bachelor's thesis is the design and assessment of the steel load-bearing structure of a storage hall with an administrative part. The proposed building is located in Uherské Hradiště. The floor plan of the building is 24 x 40 m and the height is 9.0 m. The main load-bearing structure is designed as a two-hinged frame made of rolled IPE profiles. The girders and axillars are designed from thin-walled profiles. The ceiling structure in the administrative part is designed as a composite concrete slab in trapezoidal sheet.
|
|
| |
|
|
Shopping mall in Brno
Brozmanová, Dagmar ; Horáček, Martin (referee) ; Pešek, Ondřej (advisor)
The aim of the diploma thesis is to design and assessment of the steel structure of shopping mall, which is situated in Brno. Three variants were processed, from which one was selected for more detailed processing. Variants have hexagonal floor plan with maximum dimension 60,0 m, four floors and same structural solution. They differ in plan of secondary beams and columns, in floor plan of glass atrium and used cross-sections. Building´s load-bearing structure consists of pin-supported columns, primary beams, secondary beams and purlins. Rigidity of the structure is enshured by system of vertical bracings and in horizontal direction by composite slab. The structure elements are made of steel S355, except secondary beams, which are made of steel S235.
|
|
|
Frame reinforced concrete structure
Kalinová, Kristýna ; Perla, Jan (referee) ; Požár, Michal (advisor)
The aim of this bachelor thesis was design a part of a load-bearing cast-in-place reinforced concreate structure of the warehouse building. The load-bearing structure was designed of transversely oriented multi-storey frame. Floor structure consists of a continuous slab and secondary beams placed on the primary beams of the frames. The shape and reinforcement of the continuous slab, secondary beams, primery beam, column and pile cap was designed. Appropriate drawing documentation has been created for the proposed load-bearing elements.
|
|
|
Office Centre
Robotka, David ; Štrba, Michal (referee) ; Pilgr, Milan (advisor)
This diploma thesis deals with design of steel structure with composite steel-concrete floor structure of a office building.The building is located in Moravský Krumlov. The Office buidling consist of multi-storey building and an entrance atrium. The total ground plan's dimensions are 52,8m x 48,0m. The multi-storey building has 8 floor. The maximum heigh of the building is 25,32m above ground. The project is designed in two options. For winning variant is including check and it is performed a drawings with design and check assembly details and anchorage.
|
|
|
Administrative Centre
Rádlová, Markéta ; Sýkora, Karel (referee) ; Bajer, Miroslav (advisor)
This diploma thesis deals with the design and assessment of the steel structure of the administrative building. The building is situated in Svitavy. The construction has several floors, the ground plan is L-shaped. Other floors have a rectangular ground plan. The external ground plan dimensions of the building are 55.2 m × 72 m. The building has terraces and three height levels occupied. At the first height level the building reaches 5 floors, the other 7 floors and the top 9 floors. the main material will be S235 steel on the construction.
|
|
|
Business Centre
Dušek, Ivo ; Sýkora, Karel (referee) ; Pilgr, Milan (advisor)
This Master thesis was about calculation and design of supporting steel bar structure multi storey administrative building. Steel structure with rotation symmetric floor plan has sixteen storey. Maximal size of building is 100x100m. Structural design report is made by a combination of manual calculations and calculations using software RFEM by Dlubal. Structural design report includes calculations of secondary beam, primary beam, column, bracing, purin, truss girder and others part of structure with their connections. Thesis includes drawing documentation and report.
|
|
|
Multi-Storey Building with Atrium
Brodecký, Miroslav ; Buchta, Stanislav (referee) ; Barnat, Jan (advisor)
The diploma work deals with a design of a steel load-bearing structure for a multi-storey building with an atrium consisting of five above ground floors. The property is situated into Blansko area. Its ground-plan measures are 32.5 x 56 m. The maximum height of the property is 23.2 m. The height of the floor is 4 m. Load-bearing structure is designed with articulated joints. The atrium roof is formed from truss girders. The design and assessment is done according to rules in operation.
|
guest ::
