|
|
Concrete flat slab supported by columns
Turek, Jan ; Požár, Michal (referee) ; Perla, Jan (advisor)
This bachelor thesis deals with design of concrete flat slab of hospital building. The slab above the ground floor was designed. Internal forces were analysed with RFEM software based on finite entity method. Results were proved by the Direct Design Method and Equivalent Frame Method. The structural assessment was performed according to ultimate and serviceability limit states.
|
|
|
Diagnosis selected bridge structure
Novák, Jakub ; Láník, Jaromír (referee) ; Žítt, Petr (advisor)
The Diploma thesis deals with the Diagnostics of Reinforced Concrete Bridge in the village of Luhačovice. This thesis also describes the individual Diagnostic methods and instruments used in purpose to make Diagnosis of bridge constructions. The main aim of the Diagnostics is to determine the current state of the Bridge which consists in verification of the actual road structure, determination of the physical and mechanical parameters of the Concrete (strength, depth of carbonation) and in some parts of the bridge structure to determine the type, number and position of the bending or shear reinforcement. Based on the evaluation of the laboratory tests a static calculation of the selected part of the Bridge structure is performed. The final evaluation is the determination of the load and the subsequent design of the necessary and recommended measures for maintaining or improving the functionality of the bridge structure.
|
|
| |
|
|
Use of FRP Composites as Reinforcing Material for Concrete
Kratochvílová, Denisa ; Prokeš,, Jan (referee) ; Bodnárová, Lenka (advisor)
Because FRP composites have high fiber strength and good durability, they are increasingly used for repairs, modernisation and reconstruction of concrete structures. In practice, however there is a risk of premature separation of FRP reinforcement from concrete. This can be avoided by appropriate selecting the fibers and the matrix and the appropriate shape of the reinforcement. The actual materials and consistency of FRP reinforcement with concrete are also covered by this diploma thesis.
|
|
|
Technological stage of the gross superstructure of the apartment house in Prague - Dablice
Kucsera, Adam ; Kopecký, Lukáš (referee) ; Šlanhof, Jiří (advisor)
The work adresses the technological stage of the gross superstructure of the apartment house in Prague – Dablice. The house consist of reinforced concrete structure on the ground floor, three other floors in a brick form of pramic blocks Porotherm, ceilings above the second and third floor are composed of Spiroll prefabricated ceiling panel and roof structure is made up of gang nail trusses, thanks to this composition of house, it was necessary to address how to storage materials on the site, and also the arrival, departure and parking of vehicles. Technological regulativ is focused on concreting of the reinforced concrete monolithic framework.
|
|
|
Static solution of the ceiling structure of apartment building
Habanec, Kamil ; Nečas, Radim (referee) ; Zich, Miloš (advisor)
The Bachelor thesis deals with the static solution of the ceiling construction of an integrated apartment building. The aim is to design, or change the sizes of the projected structures in the submitted project, to ensure the interruption of thermal bridges and protection against foot noise. Subsequently, their static solution, dimensioning and assessment to marginal states. The elements intended for the solution are ceiling structures above the second upper floor, beams, a connecting staircase and a column. The calculation of internal forces was performed in the student version of SCIA Engineer 20.0 with a comparison of values on an independent simplified model. The work also includes drawing documentation for the aforementioned elements. The calculation was carried out according to the applicable standards and principles.
|
|
|
Sewage disposal plant
Doležal, Martin ; Kraut, Jan (referee) ; Šulák, Pavel (advisor)
This thesis deals with the design and static assessment of a concrete part of a sewage treatment plant. Specifically, the calculation and assessment of the base plate, external walls, internal walls and ceiling slabs, elaboration of shape and reinforcement drawings of selected structural element. The concrete part of the Sewage disposal plant is all below ground level. Static system and the calculation of internal forces was carried out in Scia Engineer 2011 - student version.
|
|
|
Strain, stress and strength analysis of the truss construction.
Hladký, Maroš ; Horníková, Jana (referee) ; Vrbka, Jan (advisor)
The thesis is focused on strain, strength, and strain analysis of planar truss construction. The purpose of this work is to determine the load on each rod, and to assess the safety against limit states. After determining the primary characteristics, the structure will be modified and load and safety re-calculated. Depending on the outcome, the design will be changed again. Next, will be destined gravity affect on the design and impact of production inaccuracy. Deformation of structure will be calculated.
|
|
|
Reinforced concrete structure of a administrative building
Januš, Ondřej ; Švaříčková, Ivana (referee) ; Šulák, Pavel (advisor)
The main subject of this bachelor thesis is focused on the design of reinforced concrete locally supported slab of a multifunction building. Internal forces are calculated by a computer software SCIA Engineer and its resultes are compered with simplifield method. Another part includes the design of a reinforced concrete stairway and a column situated in the center of the disposition. The calculation method is based on ČSN EN 1992-1-1.
|
|
|
Technological solution for the education complex in Brno
Blažek, David ; Mohapl,, Martin (referee) ; Lízal, Petr (advisor)
This master’s thesis deals with construction of the gross building of new building of learning complex FEKT VUT in Brno. It contains the design of earthworks, underground setting piles, monolithic structures and isolation of the building for further construction. Construction and technological project includes technical report, time and financial plan of construction, study of the implementation of major technological stages of site preparation, budget of facilities, technological regulation to solved stages, inspection and test plan of monolithic structures, health and safety plan and energy label of objects.
|
guest ::
