|
| |
|
|
Museum in Moravské Budějovice
Růžička, Tomáš ; Barnat,, Jan (referee) ; Pilgr, Milan (advisor)
The subject of the bachelor’s thesis is to design and check load-carrying steel structure of a single-nave hall. It consists of main frames, whose distance between axes is 5,8 metres. Main frame consists of web-plate columns and a roof truss girder. Ground plan sizes of the hall are 34x40,6 metres and maximum height is 12,72 metres. Designed object is situated in Moravske Budejovice.
|
|
|
Steel structure of industrial hall
Pavlas-Jirásek, Václav ; Horáček, Martin (referee) ; Balázs, Ivan (advisor)
The bachelor thesis deals with the design of a main load-bearing steel structure of industrial hall with two overhead cranes. The floor plan dimensions are 24 × 60 m, height of building is 16 m. The main structure consists of pin-supported symetrical truss girders on columns with centre to centre spacing 12 m. The truss purlins are pin-supported on the girders. The columns are fixed in the lateral direction. Spatial rigidity of the structure is secured by system of bracing. The base material is steel of class S355.
|
|
| |
|
|
Strenghtening of the load bearing parts of the production hall
Čížová, Kateřina ; Pinkas, Karel (referee) ; Klusáček, Ladislav (advisor)
The diploma thesis deals with the strenghtening of the supporting parts of the production hall in Drásov. In the first part the existing load bearing capacity of the structure is solved. The next step is to design of strenghtening variants for nonconforming columns and short corbel. Columns and short corbel are strenghtening with monostrand. At the end of the thesis, verification of the load bearing capacity of the strenghtening structure is performed.
|
|
|
Assessment of sewerage systems of urban catchments
Velikovská, Kristýna ; Raček, Jakub (referee) ; Raclavský, Jaroslav (advisor)
The bachelor thesis prepares new and present knowledge of assessment of sewerage systems of urban catchments. Theoretical part of the thesis describes classical and contemporary integrated concept of draining waste water from urban catchments. In pursuance of contemporary integrated concept, there is a list of methods, which is used for monitoring conditions of sewer system, making a simulative modeling and solving of elementar tasks in water management. Practical part of the thesis uses gained knowledge to assess sewerage systems of Kladeruby nad Oslavou village. The bachelor thesis is written with respect to valid legislation.
|
|
|
Design of various ways of carrying out the ceiling construction of a family house
Klust, Vojtěch ; Šulák, Pavel (referee) ; Kostiha, Vojtěch (advisor)
Bachelor´s thesis deals with the design of floor structure of detached house made in three variants. In the first variant floor structure is made by reinforced concrete two way slab. In the second variant floor structure is made by prefabricate prestressed concrete floor slab SPIROLL. The third variant is filigree floor slab which are then concreted. The thesis includes a structural design as well as drawings, All calculations were performed in accordance with applicable standard.
|
|
|
Tennis Hall in Bystřice pod Hostýnem
Pospíšilová, Vendula ; Barnat, Jan (referee) ; Pilgr, Milan (advisor)
The bachelor thesis is focused on a proposal and a review of load-carrying steel structure of the tennis hall for 3 tennis courts. The construction is located in Bystřice pod Hostýnem. The hall contains 11 main frames spaced by 5.8 m. It is a building of a rectangular plan with a groud plan dimensions of 38.0 x 58.0 m. The main support system includes cylindrical lattice truss, purlins, longitudinal and transverse bracing which secure the spatial rigidity of the construction. For analysis was used the programme Scia Engineer.
|
|
|
Bridge over the river after its widening
Strouhalová, Petra ; Rušar, Jaromír (referee) ; Klusáček, Ladislav (advisor)
This final thesis deals with new design of post-tensioned concrete bridge across river Vsetínská Bečva in the area Ústí u Vsetína. The existing bridge with three spans found in therms of inundation, that´s why is replaced by new four spans bridge construction. The bridge is situated on highway I/57 and used to transfer across the river. The superstructure is designed in three alternatives. Detailed assessment is only for one chosen variant a post-tensioned two-beam concrete.
|
|
|
Sports Building in Olomouc
Hrycík, Martin ; Hron, Lukáš (referee) ; Pilgr, Milan (advisor)
Work deals with design of the steel structure of the sports hall in the Brno region . The hall has a rectangular shape with dimensions of 42 x 24 m and a height 11 m. transverse bond makes a cylindrical truss with a span of 24 m placed on columns height of 8 m. Purlins with span of 6 m are placed on the trusses. Roofing and curtain wall is made of sandwich panels.
|
guest ::
