|
|
Kvantifikace odchylek objemu dříví při jeho měření harvestory a rozbor jejich závislostí na vybraných faktorech
Lesák, Josef
This thesis focuses on the problems with determining the dimensions of the timber during the processing with the harvesters. This study discusses all the possible variations in measurements, their origin and a resulting impact on the volume of the timber. Furthermore, this thesis describes other methods of measuring timber, such as manual measurement or measuring by sensing proportions of the timber with a saw measuring frames. The emphasis is on the variances in the calculation formulas, particularly focused on the differences in setting the reading bark. The research is supported by two measurements in the field, more specifically on the spruce vegetation. During these field measurements we performed the cuts with harvesters on the amount of 6 trees which were subsequently transported to the sawmill for the standard electronic checks. The log performed with the harvesters were afterwards measured twice for the purposes of precise volume measuring.
|
|
| |
|
|
Application of Management Control System in JEDNOTA, spotřební družstvo v Boskovicích
Grénar, David ; Lžičař, František (referee) ; Žižlavský, Ondřej (advisor)
The diploma thesis focuses on the use of controlling in the company JEDNOTA, consumer cooperative in Boskovice. Specifically, this thesis focuses on planning and analysis of variances. The thesis is divided into four parts. The first part deals with the theoretical knowledge about controlling and planning. In the second part of the thesis, the analyzed company is presented. In the third part, the thesis deals with the analysis of the current situation and the last part proposes possible solutions, which should lead to improvement of the current state.
|
|
|
System of quality control in selected company
OCHRANOVÁ, Iveta
The master's degree thesis deals with the analysis of the quality management system in a selected organisation. The theoretical part focuses on history and quality management, quality principles and its concept. It describes the quality management system, its implementation and documentation. General standards and standards for hot-dip galvanising are an essential part for an easier orientation in the issues. The practical part describes a company engaged in hot-dip galvanising, the company's goals and the process of hot-dip galvanising. The next part provides a detailed description of the technological process concerning hot-dip galvanising to illustrate practically the quality management system. In order to follow the production process, one contract was selected and was closely observed during every step of the whole process of hot-dip galvanising. The last part of the chapter includes data analysis of the quality management system as well as a description of the Pareto analysis, which represents the only instrument of quality management in the organisation. The conclusion provides some improvement suggestions which should be applied by the company to enhance the quality management system and at the same time to prevent possible complications.
|
|
|
The Method of Standard Costing on Example of Specific Company
Kovářová, Kateřina ; Knorová, Kateřina (advisor) ; Krupička, Josef (referee)
The subject of the bachelor thesis is the method of standard costing and analysis of variances, that are both necessary for management and controlling of costs. It provides managers with information about the difference between actual and required state. The first part describes the theory of this method, where standard and subsequent analysis of variances are examined. In the second part, the bachelor thesis deals with company, that is part of a multinational concern. This company manufactures and designs electronic components. The author examines how the company applies the mentioned method and further analyzes the variances. Based on the results of the previous part, the author suggest possible improvements of this method.
|
|
|
The Current Shape of the Administrative Style (Represented by Language Analysis of Citizens' Notices to an Office)
Melichová, Magda ; Mareš, Petr (advisor) ; Hoffmannová, Jana (referee)
Bachelor Thesis Magda Melichová, The Current Shape of the Administrative Style Abstract (in English) The bachelor thesis is trying to describe current shape of administrative style by analysing official notices from citizens to Tax Administration of the Czech Republic. With a support of principal stylistic works the thesis analyses collected texts mainly from the point of view of meeting the standards of administrative style. The thesis overlooks the extent of application of features and tools typical for this style, and searches for explanation of deviations and language defects. The thesis goes methodically from a formal shape of the analysed texts through a syntactic and lexical level to a morphological level of the analysed texts. The thesis maps the most common deviations and mistakes most reliable for potential misunderstanding of the texts.
|
|
|
Speech of the Tourist Guide
Pecháčková, Veronika ; Palkosková, Olga (advisor) ; Chejnová, Pavla (referee)
This work deals with speech of the tourist guide from the point of view of individual linguistics levels. This topic was chosen because the author of this work studied tourism at secondary school and she has personal experience with the job of tourist guide. Second reason is the fact that this topic has not been described in details yet. Beside the activity of tourist guide and his/her nonverbal communication, this work deals with his/her speech from the point of view of five linguistics levels - phonetic/phonological, morphological, lexical, syntactic and stylistic one. For their analysis four video-records were used. There is real speech of four tourist guides at castles on these videos. The result of this work is the formulation of specific features of speech of the tourist guide. There are several points added to these features. These points are about recommendation for each tourist guide and his/her right and effective speech.
|
|
|
Controlling and his role in enterprise management
Hájková, Věra ; Bednarčík, Zdeněk (advisor) ; Magdalena, Magdalena (referee)
The presented work focuses on controlling and its place in the enterprise management of Intertell spol. s r. o. The thesis is devided into theoretical and practical part. In the first theoretical part the terms of controlling, the controller are defined and there are types of controlling according to the business activities defined there too. The chapter also includes selected tools and methods of controlling.
In the practical part there is the Intertell spol. s r. o. company description given which is followed by a subsequent analysis carried out of the external and internal environment of the company. In the course of the text the production activities of the enterprise are being described. Subsequently, the author conducts the analysis of current controlling management of the enterprise and the findings are summarized in the conclusion chapter.
In the proposal part, the author recommends improvements in management of the enterprise by the introduction of the internal accounting, proposes to monitor the profitability of individual projects and also recommends an increase in the number controllers in the enterprise.
|
|
|
Construction tasks in space
MALÍŘSKÁ, Eva
My bachelor thesis focuses on Construction tasks in space. Its aim is a full explanation and a summary of knowledge of stereometry. This knowledge could be used by pupils at primary schools and students at secondary schools in the topic construction tasks. The theme is very neglected in general which leads to very low level of spatial imagination. I have created construction tasks in space in a free parallel projection with using interactive geometric software GeoGebra. The bachelor thesis contains solved examples with a detailed commentary of solution but it also includes unsolved examples for practising.
|
|
|
Cost Management in the Company
Heroudek, Jiří ; Šimeková, Jana (referee) ; Kocmanová, Alena (advisor)
This Master‘s thesis is focused on cost analyses and cost management in FEI Company. Theoretical part describes basic and advanced cost model and their usage for efficient cost management. Practical part deals with analyses of calculation method for standard costing and life cycle costing. As a part of these analyses, some recommendations are provided to make cost calculations more accurate.
|
guest ::
