|
|
Physical Phenomenon as a Creative Method in Architecture
Buryová, Tereza ; Mach, Jan (referee) ; Kristek,, Jan (advisor)
Cellular_ polar research station Antarctica is the driest, the busiest and most extensive place on Earth, half-year-shrouded. People still live here. They set up the research stations in which they live and work. In these extreme climatic conditions, the station originates and disappears due to natural behaving. Stations provide researchers with safety and space for research, including comfort. They are built in different ways and provide different comforts, according to technological and transport options.
|
|
|
Fracture behaviour of heat affected zone near heterogeneous weld joint
Jelínek, Vladimír ; Válka, Libor (referee) ; Juliš, Martin (advisor)
The study deals with mechanical characteristic of heterogeneous weld joint. The low carbon steel 22K and austenitic steel have been used as a experimetnal materials. The low carbon steel has special properties in basic condition. The sample has been evaluated in basic condition and after annealation. There have been evaluated impact of annealation proces to structure and mechanical charakteristics in experimental part of study. The particularised analysis of microstructure has been done by pictorial analysis. Mechanical characteristics has been examinated in both conditions by 2 different methods – measurment of microhardness according to Vickers and test of fracture toughness on compact tension specimens.
|
|
|
Influence of thermal processing to microstructure of various steels
Kocman, Lukáš ; Havlík, Petr (referee) ; Štěpánek, Roman (advisor)
This bachelor thesis deals with the heat treatment of steel, especially measuring the influence of individual heat treatment technologies on changes in the microstructure of steels. The theoretical part of the work presents alloys of iron and carbon, furthermore describes their phase transformations in the solid state, particularly the transformation diagrams of steels. In another part of theoretical part, the basic heat treatment technologies and their influence on the mechanical properties and microstructure of steels are described. The experimental part deals with the preparation of metallographic samples and presents results of examining the microstructure and measuring the hardness of individual samples. At the end of the work the synthesis of the theoretical part and results of the experimental part is used for the partial and overall evaluation of the influence of heat treatment on the microstructure of steels.
|
|
|
Effect of heat treatments on the microstructure and hardness of high-entropy alloy
Jesenská, Mária Ľudmila ; Adam, Ondřej (referee) ; Moravčíková de Almeida Gouvea, Larissa (advisor)
V tejto práci je študovaná neekviatomická Al0.2Co1.5CrFeNi1.5Ti vysoko entropická zliatina, ktorá bola vyrobená pomocou vákuového indukčného tavenia. Zliatina v odliatom stave bola analyzovaná a tepelne spracovaná pri teplote 1000 °C po dobu 5h, a následne podrobená tepelnému spracovaniu pri teplote 750 °C po dobu ďalších 5h, s cieľom skúmania vplyvu teploty a doby tepelného spracovania na fázové zloženie, mikroštruktúru a mechanické vlastnosti. Na vyhodnotenie možných fáz prítomných v zliatine bol použitý pseudobinárny fázový diagram (CALPHAD). Mikroštruktúra zliatin bola charakterizovaná a chemicky analyzovaná pomocou röntgenovej difrakcie (XRD), elektrónovej mikroskopie (SEM) a energeticky disperznej spektroskopie. Výsledné vyhodnotenie tvrdosti materiálu prebehlo pomocou skúšok mikrotvrdosti a nanoindentácie.
|
|
|
Microstructure of high-alloy steels
Feller, Šimon ; Bořil, Petr (referee) ; Ostratický, Marek (advisor)
This bachelor thesis concerns formation of microstructure of high-alloy steels. In theoretic part there is summary of sorting high-alloy steels, possible structures and how these structures affect qualities of steel. For practical part two small experimental casts were created, which tried to imitate composition and structure of two another, much bigger casts. Microstructure, makrostructure and grain boundary segregation were compared.
|
|
|
Geopolymers based on fly ashes and brick body
Řezník, Bohuslav ; Lang,, Karel (referee) ; Příhoda,, Jiří (referee) ; Žižková, Nikol (referee) ; Rovnaníková, Pavla (advisor)
In line with the current focus on utilizing side products of various production processes, this dissertation thesis analyzes the process of alkali activation of particular side products: fly ash and brick fragments. This activation produces geopolymeric materials widely used in civil engineering. The thesis aims to optimize the geopolymerization process so that the resulting geopolymer is both ecologically and economically viable. To that end, the thesis studies the course of geopolymeric reaction between the alkali activator and fly ash from: (i) the Chvaletice power plant, (ii) the Dětmarovice power plant, and (iii) biomass combustion, as well as (iv) fluid fly ash from the Hodonín power plant. All experiments of geopolymeric reaction have focused on the factors influencing the synthesis of geopolymers—that is: composition of the alkali activator, the ratio of alumino-silicate to the activator, and the impact of temperature on structure of the synthesized geopolymer. Further, the thesis analyzed the synthesized polymer’s microstructure, phase composition, resistance against corrosive conditions, and compressive strength, as well as mechanical-fracture properties of selected fly-ash geopolymers. The thesis finds that the most suitable for geopolymeric synthesis appears to be the fly ash from the Chvaletice power plant in which case the obtained geopolymers showed best properties in the studied areas. The fly ash from the Dětmarovice power plant, biomass fly ash, and fluid fly ash have failed to reach acceptable properties. Separately, the thesis studies the geopolymerization of brick body that could be suitable input for alkali activation. The geopolymers synthesized from brick fragments resulted in materials of supperior mechanical strength. A mixed use of fly ash and brick fragments failed to show a synergetic effect. Properties of the resulting geopolymers have been inferior to the properties of geopolymers produced using just fly ash or just brick body.
|
|
|
Study of the Effectiveness of Copolymer EVA Depending on Storage Conditions of Mortar
Hlawiczka, Jakub ; Sokola, Lubomír (referee) ; Žižková, Nikol (advisor)
The Diploma thesis is adressing the issue of polymer-modified mortars (PMM) and theirs properties in dependence on curing conditions. The reasons of using polymer additives and some selected applications of PMM are described in theoretical part of this work. Cementitious composite (mortar) hardening is especially focused on mechanism of formation co-matrix system based on cement hydration products and polymer film in dependence on curing conditions. The knowledge of interaction of cement and ethylene-vinyl acetate (EVA) copolymer is presented in the latest paragraphs of theoretical work. Following practical part presents influence of EVA to physical and mechanic properties of PMM in dependence of dosage polymer additive and exogenous factors. The study of microstructure was investigated by scanning electron microscope and high-pressure mercury porosimetry. Tests and investigations are described and evaluated.
|
|
|
Preparation and Characterization of Porous Magnesium Based Materials
Březina, Matěj ; Pacal, Bohumil (referee) ; Vojtěch, Dalibor (referee) ; Ptáček, Petr (advisor)
Bulk magnesium materials produced nowadays via powder metallurgy are based on a vastly extensive technological spectrum, which makes it possible to create a wide range of materials. This work focuses on the preparation of bulk materials from magnesium powder by cold pressing and hot pressing, sintering and field assisted sintering. The bulk materials were prepared in a series of compacting pressures from 100 MPa to 500 MPa and the sintering temperatures were selected in the range of 300 ° C to 600 ° C in order to characterize the influence of the manufacturing conditions and technology on the final properties of bulk materials. Prepared materials were evaluated in terms of microstructure, hardness, microhardness, three-point bend test, and fractography. From the hot pressed materials, the samples prepared at 400 and 500 MPa and 400 °C had the highest strength and hardness. The classic sintering of magnesium in the furnace with argon atmosphere proved to be ineffective due to the oxide layer on the surface and the presence of oxygen in technical argon. The SPS sintering (Spark Plasma Sintering) was the more effective with the lower applying pressure used to make the preforms and with the higher applied pressure during the SPS process itself. Highest strength and hardness were achieved in this case of materials sintered at 600 ° C prepared from free powder and the most porous preform (100 MPa). The bulk materials were prepared using all methods used, but the properties of these materials varied considerably depending on the technology used.
|
|
|
Surface hardening of steels by high power diode laser
Bazalová, Lucie ; Daněk, Ladislav (referee) ; Mrňa, Libor (advisor)
The master thesis deals with the technology of surface hardening of steels by high power diode laser. The thesis is an experiment of surface hardening of steel 12 050 on various parameters of speed movement of the laser head and used power. At first, the work deals with the possible technology of surface hardening, industrial lasers and possible methods for measuring hardness. It describes the material used and the evaluation of the macrostructure and microstructure of the samples and evaluates the achievement of hardness, depending on the distance from the surface. The results are used to assess the suitability of the parameters during quenching.
|
|
|
Cement-bonded particleboards with utilization of alternative raw materials
Urbánek, Libor ; Vacula, Miroslav (referee) ; Bydžovský, Jiří (advisor)
The diploma thesis is focused on effective utilization of currently produced alternative raw materials in the production of cement-bonded boards. The emphasis is primarily on the scraps and dust arising from the processing of cement-bonded slabs, as well as on slag and limestone. The theoretical part contains a survey of current knowledge about the given issue. In the experimental part, the alternative raw materials were analyzed in detail and their influence (as modifier components of the matrix and the filler) on the properties of cement-bonded slabs was examined. Research and development took place using physico-mechanical, thermal and microstructural methods.
|
guest ::
