|
|
Cutting of supporting profiles on building
Protivínský, Pavel ; Osička, Karel (referee) ; Kalivoda, Milan (advisor)
The bachelor thesis deals with technology for material cutting on the building site. Firstly, there were described different methods for material cutting, their principle, reached quality of section, demands for requirements on Occupational safety and health (OSH) and there are described different qualification of device operators. Secondly there were described specific condition in a mobile building site. Eventually, there are compared all the examined technologies after the experiment according to different criteria.
|
|
|
Advanced methods of material division focusing on laser, water jet, electroerosive wire cutting and drilling
JANOVÁ, Jana
In the introductory part of the work carried out the theoretical research of advanced methods of cutting. Chosen methods are laser, water jet and EDM wire cutting and trenching the wire. There is described the history, the principle of separation and classification. The practical part of these methods are discussed in detail with emphasis on their use in practice. The text is supplemented with illustrative examples of products. Finally, the work focuses on the comparison of the described methods. Overall, the work is conceived as a methodological text useful in teaching this topic.
|
|
|
Selection of appropriate technology for the production of welded constructions of boiler JE 12 and JE 6
Janás, Milan ; Slaný, Martin (referee) ; Dvořák, Jaromír (advisor)
The diploma thesis on the selection of appropriate technology to produce the welded construction of electric boiler JE6 / 12 aims to evaluate available production technologies and choose the most suitable of them. Choosing the technologies focuses primarily on those that are available at Slokov. Due to the connection of the welding robot to the production, it is necessary to consider the overall connection of the production and the high accuracy of the production. The individual methods of production, material separation, welding, bending and surface treatment are first theoretically analyzed and their advantages, disadvantages and parameters are summarized. Subsequently, it is practically tested individual technologies for a representative part and it evaluates the achieved parameters and economics of production. With the results obtained, the most suitable technologies are selected. With the selection of technologies, there is a need for a change in design and production parameters. Changes and modifications to the design describe another point. To achieve maximum efficiency and quality of production, a welding robot is used to make welds. The description of the production, modifications and overall design of the robot describes the next point of this work. The last part summarizes the economics of selected production technologies and details the technological process. The aim of the thesis is to design such technologies that will be advantageous from the point of view of the economy and from the perspective of the available possibilities of the company.
|
|
|
Comparing roughness of cutting edges in cutting of CO2 and YbYAG laser
Podaný, Petr ; Hála, Michal (referee) ; Mrňa, Libor (advisor)
The bachelor thesis deals with the analysis of cutting edge roughness in the process of laser gas cutting using the CO2 laser and laser solid-state cutting using the Yb:YAG laser. The theoretical part is consists of a basic information on industrial lasers and a their methods which use for material cutting. There is part of describing of problems optimum settings cutting parameters and all of roughness measurement. The experimental part was measurement of 20 samples. Samples were made of structural steel DC 01 a S235JR+N, stainless steel X5CrNi18-10+2B and aluminum alloy AlMg3. In the following part is the description of materials and also laser radiation which was used to production of samples. The end of this bachelor thesis is dedicated to evaluation and place in a folder is ČSN EN ISO 9013.
|
|
|
Efficiency Improvement of Grinding Technology Using Construction Adjustments
Koláček, David ; Prokop, Jaroslav (referee) ; Sedlák, Josef (advisor)
This thesis is oriented to technological and design direction. It is focused on the upgrading of existing machinery from a structural perspective. There is studied the impact of design modifications to the existing production process from a technological point of view. This thesis is specifically concentrated on the technology division of the material, especially on the technology cutting-off in dry condition. There is examined the ability of self-sharpening cutting tools and the quality of the final product under varying input conditions. The job is finished by the carried out techno-economic evaluation, where are compared the costs of the structural adjustments in comparison with mechanical equipment, that could be purchased on the market. The thesis is finished with overall analysis of the optimal efficiency of the production process.
|
|
|
Unconventional production technology of chains
Hostinský, Michal ; Mrňa, Libor (referee) ; Osička, Karel (advisor)
Unconventional technologies and their continual development brings along new possibilities in the manufacturing process. The submitted project is focused on solving problems in the procession of sheet metals in the manufacture of special parts of roller and conveyor chains. In the assessment of the technology of components, laser cutting was evaluated as the most optimal technology. With this goal, there was a public tender in terms of the purchase of a new machine designed for the manufacturing operations of the company of RETEZY Vamberk. This company ranks among the most major manufacturers of conveyor, roller and special chains in Europe.
|
|
| |
|
|
Measurement of cutting edge roughness in the process of laser metal cutting using the Yb-YAG laser
Maňas, Petr ; Hála, Michal (referee) ; Mrňa, Libor (advisor)
The project elaborated in frame of bachelor´s degree program B-STG (“Mechanical Engineering Technology”, 2303R002), evaluates the roughness of samples of cutting edge laser cutting. Cutting performed the fiber Yb:YAG laser. The samples consisted of structural steel J235JR and DC01, stainless steel X5CrNi18-10 and aluminium alloys AIMg3. They were evaluated according to the ČSN EN ISO 9013 standard. The classification of samples into classes according to the standards of accuracy. The theoretical part is consists of a description of the methods of cutting, a basic principle of the laser and its types. It includes cutting parameters and their influence on the quality of subsequent defects. It is described roughness measurement and standard ČSN EN ISO 9013.
|
|
| |
guest ::
