National Repository of Grey Literature 52 records found  previous11 - 20nextend  jump to record: Search took 0.00 seconds. 
Hydraulic circle of undercarriage two-way vehicle
Rozumek, Jaroslav ; Tomeček, Pavel (referee) ; Škopán, Miroslav (advisor)
The aim of this diploma thesis is a concept of hydraulic (hydrostatic) circuit of rail – road vehicle drive for the drive on communication and railway. As my work is not related to a specific type of road vehicle dedicated to a drive on railway, my work is of strictly reference nature. On request I was provided by Bosh Rexroth s.r.o. with a hydraulic scheme of two-way undercarriage (see appendix), which is also a source material for the new concept. My work is focused on interests of SaZ s.r.o., which deals with the development and rebuilding of road vehicles into rail – road vehicles. The first phase is focused on the choice of the most convenient component of railway undercarriage in accord with the assignment. The second phase is oriented on the calculation of travel parameters, dimensioning of systems with concretization of typal mark of components. A part of the second phase is also a concept of hydraulic braking system of rail undercarriage. After that follows a complete evaluation, eventually an alternative solution of given problem.
Hydrostatic drive of multi-purpose loader DAPPER
Vydra, Tomáš ; Merenda, Lukáš (referee) ; Škopán, Miroslav (advisor)
This thesis deals with design of hydrostatic drive for multipurpose loader and tool carrier DAPPER. At the beginning is research of different basic concepts and modern solutions to the problem, aided by a detailed description of competitive machine in the same performance category. Extensive comparison with other producers is included in the annexes to this thesis. Furthermore, a theoretical driving characteristic and its appropriateness is examined further on the basis of two model situations. The calculations of the individual components of the hydraulic circuit precedes drive kinematics analysis of articulated machine frame, on it final conception of hydrostatic drive is chosen. Firstly hydromotors and hydogenerator are chosen on the grounds of calculations then hydraulic hoses, filters and flow divider. Next chapters are aimed to calculations of hydraulic losses and thermal calculation of hydraulic circuit. Final part deals with introduction the final characteristics of drive. The practical parts of the work are assembly drawings with main power components and hydraulic schematic of drive.
Review and propose modifications to the cooling system of skid steer loaders B861, B961
Bečka, Pavel ; Pokorný, Jan (referee) ; Škopán, Miroslav (advisor)
The object of this diploma thesis is revision of coolant system skid steer loaders “BOBEK” B861, B961 and his eventually optimization for prevention of overheating hydraulic system and engine. The first part dedicate of general issues of coolant skid steer loaders. The second part is the calculation during heat stress hydraulic systems of loader and the third part include proposals for solutions problems of overheating hydraulic systems and combustion engine.
Horizontal wood splitting machine
Pištělák, Zbyněk ; Pavlík, Jan (referee) ; Knoflíček, Radek (advisor)
The main purposes of this bachelor thesis are the analysis of wood splitting machines and wood. The thesis is also focused on my own design of wood splitting machine according to specified parameters. There are also proposals of machine and hydraulic circuit. The thesis also including calculations, the assembly procedures, analysis of risks, price estimation and manual. The drawings and bills of materials are also the part of the thesis.
Design of hydraulic travel of reaper`s drive unit
Galda, Martin ; Černý, Michal (referee) ; Brandejs, Jan (advisor)
The goal of my bachelor work is Design of hydraulic travel of reaper`s drive unit on exploration of facts with these parameters: independent wheel drive, fluent speed regulation in both forward and reverse motion, speed 0-10 km/h. Briggs&Stratton I/C OHV AVS engine is used for working the machine. It's output is 8,46 kW. Dakr, s.r.o, company demanded, that approximately 20% of engines output is to be used for driving.
The small hydroelectric power station design
Kokeš, Petr ; Pěcha, Jiří (referee) ; Matoušek, Antonín (advisor)
The thesis deals with comprehensive design of the small hydroelectric power station in the particular site. There is the site description in the first part followed by evaluation of the hydroenergetic capacity of the watercourse and description of the inlet building and piping. Building and machinery part of the turbine hall is described in the next part. The electric part of the power station is worked up to wider scope and includes hydroalternator, switchgears incl. power for self-consumption, electric protections, cabling, transformer substation and high voltage inlet line. There is a description of the control system in the next part and economical evaluation of the investment is at the end.
Backhoe for tractor
Jurák, Pavel ; Červinka, Jan (referee) ; Škopán, Miroslav (advisor)
The aim of this thesis is a design of an additional excavator with side shift for agricultural tractor with power from 50 to 70 kW. The excavator is controlled by a hydraulic circuit. The main element here is an independent pump with a 40l / min supply, which is driven by a gearbox using a cardan shaft. The hydraulic circuit has been designed so that the temperature of the hydraulic fluid does not exceed the allowable limit. An important role is played by the connection to the tractor where was used a modified three-point hitch. This coupling of the tractor with the frame of excavator ensures sufficient rigidity when performing excavation work. When calculating the excavation resistance, was considered the soil of the 4th class, this is hard-to-disconnect soil or clay. The calculation implies that the machine can be used with backhoe buckets up to 500 mm wide. Strength analysis of boom was performed in Ansys Workbench 2019. Safety coefficients were determined for individual components. The overall safety coefficient is equal to 1.7.
High pressure hydraulics in agricultural machinery
Pavlík, Václav ; Kárník, Jan (referee) ; Soukup, Lubomír (advisor)
This bachelor thesis provides an overview of the most used ways of converting kinetic energy into pressure energy and the other way around by using hydrostatic converters. It is focused on the issue of high-pressure hydraulic mechanisms in agricultural machinery. In the next section I focused on getting an overview of the function of sophisticated hydraulic systems in current tractors and calculation of heat losses of lifting weight by front three-point hitch. For solving was used Bernoulli equation for real flow in pipes.
Hydrobike - feasibility study
Kunovský, Lukáš ; Kárník, Jan (referee) ; Štigler, Jaroslav (advisor)
This bachelor thesis presents a project of hydraulic system which is intended specifically for bicycle drive and is realized through hydrostatic transducers. It gives information about necessary components and about the procedure of their selection. In this procedure it focuses particularly on weight reduction and loss minimization. Apart from the considerations as such, it also analyzes prior concepts and adopts suitable improvements from these. In the presented plan it demonstrates a method of effective verification of the real parameters of the whole as well as of the partial components.
Hydraulic press CTC 63
Vachek, Jakub ; Dokoupil, Vladimír (referee) ; Omes, Jiří (advisor)
The topic of this bachelor thesis is design of the hydraulic press for straightening rotary parts, and design plus control calculations for this press. The thesis also contains drawing of se-lected parts and a brief overview of topic that thesis focuses on.

National Repository of Grey Literature : 52 records found   previous11 - 20nextend  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.