|
|
Production of body carrier by solid forming
Kozáková, Olga ; Novotný, Karel (referee) ; Kopřiva, Miloslav (advisor)
The aim of this work is to make a literary study of the issue of solid forming, namely the forging. Based on this study to develop the best technological solution entered production parts - body bearers. Technological solutions include the establishment of all technical data and creating drawings. Part of this work is the comparison of existing possibilities of production and economic evaluation.
|
|
|
Manual production of damask steel knives
Žilinský, Martin ; Chladil, Josef (referee) ; Kalivoda, Milan (advisor)
The bachelor thesis deals with the production of damask steel and the subsequent manufacture of a knife. The theoretical part contains a technical description, the history of Damascus steel and its current use. The practical part includes a detailed design of the knife's own prototype, the technological process of damask steel production, grinding the shape of the knife, its heat treatment and making the handle. The result is the realization of the production of a damask knife according to the chosen technological procedure and the evaluation of the resulting prototype.
|
|
|
Production of holder by solid forming
Špaček, Antonín ; Štroner, Marek (referee) ; Kopřiva, Miloslav (advisor)
The diploma thesis deals with suggestion of low alloy 14220.0, produced by solid forming. This suggestion is based on the size of series that contain 100 000 pieces a year. The essay contains knowledge refering to drop forging technology and comparison with existing technologies. Two suitable variants of production were assessed, these variants are drop forging with hammers and vertical forging press. Both theories were theoretically analised in order to describe given technology. The analysis also contains calculation and suitable machine choice. Drop filling on vertical forging presses was chosen because of forging type. Furthemore forging proposition was treated including production technique. The chosen variant contains calculation, suggestion of a die, machine that was used and suggestion of flash trimming. For suggested technology was chosen vertical press LZK 3150 B. Its producer is Šmeral a.s. Brno. This project also contains technical drawings of the given component, forge, dies and phase of forging.
|
|
|
Production of holder by solid forming
Šimon, Miroslav ; Novotný, Karel (referee) ; Kopřiva, Miloslav (advisor)
The aim of this dissertation is to design an optimal technological processing of a given component by solid forming. This work includes a bibliographic study, which is the source of information for the solutions. Another important topic is the global technological processing of the given component: to begin with gear blank design until the final product. The best option seems to be the die forging on forging press in three steps. From an economical point of view, the die forging realized according to the designed technological processing appears to be the best solution.
|
|
|
Production of forging piece "Spanner"
Vávra, Jan ; Kopřiva, Miloslav (referee) ; Novotný, Karel (advisor)
Projects developed within the bachelor's degree in Mechanical Engineering, presented a proposal technology forged wrench - the hot-rolled steel bars 11 523.0. The thesis also compares the past with conventional methods of production and considering the new technological process of manufacturing. Based on the literature studies about fitting and calculations, was chosen to die forging hammer KHZ 2 A (producer ŠMERAL Brno, plant Hronov), with nominal energy of 20 kJ working pressure of 16 MPa and 30 kW electric power.
|
|
|
Production of towing hook
Frýdl, Pavel ; Štroner, Marek (referee) ; Lidmila, Zdeněk (advisor)
Requirements for the creation of a new technological process of manufacturing of towing hooks were cost savings by optimizing the initial blank and by creating semi automatic workplace. Selecting longitudinal rolling technology for manufacturing preform piece occurs to shorten production times and substantial material savings. By rolling of blank are secured always the exact dimensions of the preform piece and through a chain conveyors is facilitated handling with material for workers and reduced production time of forging line. By introduction of the proposed manufacturing method of towing hooks depending on the size of the series 30000 hooks per year will be achieved annually savings of over 4.000.000 CZK. Return of investments for the acquisition and adjustment of forging rolls and conveyors is 2,2 years.
|
|
|
Analysis of forging disagreement
Novotný, Karel ; Hoza, Jiří (referee) ; Fiala, Alois (advisor)
This diploma thesis deals with the generation of the different drope stampings in industrial process in MBNS Kovárna Company. The main purpose of this thesis is analysis of the industrial process and finding the main factors influences on the process. It especially deals with forgings of the shafts and also flanges with the similar quality of material 42CrMo4. Reasons of the disagreements are focused on surface insensibilities of the forging - crack. First theoretic part introduces company, meaning of the quality of material and describes tools used for finding reasons of the generation of disagreements. In the second practical part is described the whole industrial process and determination of the reasons of disagreements. In concluding part the results are analyzed and some correctional recommendations are suggested.
|
|
|
Forging of rotary forgings
Konvalina, Michal ; Štroner, Marek (referee) ; Lidmila, Zdeněk (advisor)
The thesis is focused on manufacturing proposal of the conveyor chain sprocket using die forging from steel C45 (12 050). Based on the literature review of eligible technologies, volume termoforming technolology has been selected here, more accurately closed die forging on a vertical crank forging press with an open flash gutter. Dimensions of forging and die are designed according to appropriate valid standards. Based on calculated tensile force of 10,83 MN will be forging performed on vertical forging press LZK 1600 P/SH. Forging die will be made of low alloy tool steel 1.2713 (19 662) and ejection of forging will be executed by three ejector pins in lower and upper finishing die.
|
|
|
Manufacturing of a jet half coupling
Ostřížek, Jan ; Štroner, Marek (referee) ; Řiháček, Jan (advisor)
The work deals with the design of the production of a jet half coupling made of aluminum alloy AlMg1Si1Mn. At the beginning of the work is an analysis of possible production methods, of which the most suitable method of die forging. Based on the evaluation of technological technology, shape adjustments are made, additions and dimensional deviations are selected. A semi-finished product 50 x 108 mm is determined from the forging volume. The crank press LZK 1600 P / SH is chosen for forging. According to the standards, 2 forging and 1 finishing dies are designed for the forging. At the end of the work is also given an analysis of cutting, on the basis of which the press LKOA 200 is chosen.
|
|
|
Issues of hammer die forging
Žižka, Jiří ; Štroner, Marek (referee) ; Podaný, Kamil (advisor)
This bachelor thesis deals with issues of hammer die forging which is technology that is mainly used for the production of shaped and height-versatile and rugged forgings with ribs and protrusions. Forgings are made by several blows of the tools which are called dies. Design of forgings is based on drawing documentation. For successful production of the component it is important to choose right forging temperature, parting line, required additions and tolerances. Hammers are machines which work with hit energy, they use kinetic energy for forming the material. Their characteristic features are good climbing of the material and filling deeper chambers in direction of the hit. Several types of hammers are used, for example fall hammer or double acting hammer and more.
|
guest ::
