|
|
Air-Conditioning in the hospital pavilion
Kops, Tomáš ; Blasinski, Petr (referee) ; Rubinová, Olga (advisor)
The aim of the bachelor thesis is to design and evaluate the air-conditioning system for the medical facility. The first and second above-ground floors are designed and designed to meet hygienic and operational conditions for medical facilities. The air-handling system provides fresh air into the interior, eliminating heat losses in the winter and heat gains in the summer.
|
|
|
Project of machine part of hydraulic circuit of laboratory SUA Nitra
Boháč, Daniel ; Ryšavá, Markéta (referee) ; Žoužela, Michal (advisor)
This Master’s thesis deals with design of hydraulic circuit of laboratory of the Slovak university of agriculture in Nitra with focus on project of its machine part. The thesis includes a description of current condition of the laboratory and a list of investor’s requirements. The main task of this thesis is to complete a project documentation which will be used to build a hydraulic circuit in laboratoty of Department of Water Resources and Environmental Engineering under Faculty of Horticulture and Landscape Engineering of the Slovak University of Agriculture in Nitra. The hydraulic circuit is based on recirculation concept. It consists of an underground water storage tank, stainless steel distribution pipes, measuring flumes and centrifugal submersible pumps. The hydraulic circuit will serve employees of the university for their scientific and educational purposes. Important parts of this thesis are hydrotechnical calculations and circuit control visualisations. The final design is based on a series of negotiations with the investor and suits his requirements.
|
|
|
Reconstruction of overhead power lines 110 kV
Krejčí, Tomáš ; Vašíček, Martin (referee) ; Lázničková, Ilona (advisor)
The master’s thesis deals with the topic new isolation lines of 110 kV. The aim is to propose new insulator hangers. The first, theoretical part focuses on the development of insulators, cutting and possibilities of application. They are the different materials that are used for the production of insulators HV, advantages and disadvantages long rod and cap and pin insulators. There are also described insulator hangers. The theoretical work is to describe thefittings for overhead transmission lines, which are, used to construct a insulator hanger. The last part of the theoretical work is intended distribution towers for overhead lines HV. The practical part deals with the design of new insulator suspensions for specific lines of 110 kV. The results are drawings newly designed hangers and a list of materials (fittings) for individual towers and the total amount of material. The practical part is calculating the differences in the conductor sag using old and new insulators hangers.
|
|
|
Heating of flat house
Segeďa, Petr ; Vendlová, Lucie (referee) ; Topič, Jan (advisor)
In my bachelor's thesis, I deal with the heating of an apartment building in Jablunka. It is a newly built apartment building with 4 floors. The aim of the bachelor thesis is to design heating and hot water for this building. In the theoretical part, I deal with the materials used for heating system pipes in heating and fittings that are used for heating. The calculation part deals with the design of the heat source, heating system, hot water heater, and radiators. The last, project part, contains a technical report and drawing documentation at the level of the implementation project.
|
|
|
Air - water heat pumps
Illichman, Petr ; Formánek, Marian (referee) ; Počinková, Marcela (advisor)
The topic of my diploma thesis is air-water heat pumps. The diploma thesis contains three parts. In the first part I describe the theory of air-water heat pumps. In the second part I consider two variants of heating, hot water heating and pool water heating using air-water heat pumps in the family house, Révova. The third experimental part is focused on observation of operational process and calculation of heat factors of air-water heat pump while in the heating model. The calculated heating factors are then compared to the heating factors from the manufacturer's graph.
|
|
|
Air - water heat pumps
Illichman, Petr ; Formánek, Marian (referee) ; Počinková, Marcela (advisor)
The topic of my diploma thesis is air-water heat pumps. The diploma thesis contains three parts. In the first part I describe the theory of air-water heat pumps. In the second part I consider two variants of heating, hot water heating and pool water heating using air-water heat pumps in the family house, Révova. The third experimental part is focused on observation of operational process and calculation of heat factors of air-water heat pump while in the heating model. The calculated heating factors are then compared to the heating factors from the manufacturer's graph.
|
|
|
Heating of flat house
Segeďa, Petr ; Vendlová, Lucie (referee) ; Topič, Jan (advisor)
In my bachelor's thesis, I deal with the heating of an apartment building in Jablunka. It is a newly built apartment building with 4 floors. The aim of the bachelor thesis is to design heating and hot water for this building. In the theoretical part, I deal with the materials used for heating system pipes in heating and fittings that are used for heating. The calculation part deals with the design of the heat source, heating system, hot water heater, and radiators. The last, project part, contains a technical report and drawing documentation at the level of the implementation project.
|
|
|
Analysis of the condition of the K 220-44 steam turbine drainage pipeline and proposal of corrective measures
Horký, Jiljí ; Milčák, Pavel (referee) ; Šnajdárek, Ladislav (advisor)
This diploma thesis deals with the analysis of the drainage pipeline of the Škoda K 220-44 steam turbine. This turbine is operated in Dukovany Nuclear Power Plant. One part of this work is proposal of corrective measures. The aims of this work include the creation of a search for drainage, steam, erosion corrosion and mapping of defects in long-term operated drainage system. Work also includes the evaluation of measured values of the pipe wall thickness measured by ultrasonic analyzer. In addition, the work contains images created from 3D model, on which the location of defects and measurements are displayed.
|
|
|
Evaluation of Smap3D software as a tool for design of evaporation system
Odstrčil, Marek ; Naď, Martin (referee) ; Vondra, Marek (advisor)
The main goal of the master thesis is an evaluation of a software package Smap 3D Plant Design in design of evaporation technology, specifically 3D of the pipeline network and its subsequent documentation. The thesis describes evaporation technology in general, then the evaporator testing site in Laboratory of Energy Intensive Processes in NETME Centre is presented, where pipeline network needs to be designed. In the next part a reference 3D model was created as well as a documentation using SolidWorks routing. Subsequently, an equivalent 3D model was created using Smap 3D Plant Design – Piping and a documentation was created using Smap 3D Plant Design – Isometric. Finally, these two methods of creating pipeline were compared to each other, and recommended method was chosen.
|
|
|
Project of machine part of hydraulic circuit of laboratory SUA Nitra
Boháč, Daniel ; Ryšavá, Markéta (referee) ; Žoužela, Michal (advisor)
This Master’s thesis deals with design of hydraulic circuit of laboratory of the Slovak university of agriculture in Nitra with focus on project of its machine part. The thesis includes a description of current condition of the laboratory and a list of investor’s requirements. The main task of this thesis is to complete a project documentation which will be used to build a hydraulic circuit in laboratoty of Department of Water Resources and Environmental Engineering under Faculty of Horticulture and Landscape Engineering of the Slovak University of Agriculture in Nitra. The hydraulic circuit is based on recirculation concept. It consists of an underground water storage tank, stainless steel distribution pipes, measuring flumes and centrifugal submersible pumps. The hydraulic circuit will serve employees of the university for their scientific and educational purposes. Important parts of this thesis are hydrotechnical calculations and circuit control visualisations. The final design is based on a series of negotiations with the investor and suits his requirements.
|
guest ::
