|
|
Belt conveyor for quartz sand
Holomek, Jiří ; Škopán, Miroslav (referee) ; Malášek, Jiří (advisor)
This thesis describes the design of a belt conveyor for transport quartz sand. The aim of this work is the calculation of a conveyor belt conveyor belt according to the specified values. Transport capacity 85,000 kg h-1, the specified center distance dunes 49 meters difference in altitude of 9.5 meters. The work includes functional calculation carried out according to ISO 5048, 1994, identifying the main dimensions and design of the actuator. We also design the tensioning device and stress analysis of shaft tensioning drum. Further drawings as required.
|
|
| |
|
|
Belt conveyor
Kvita, Josef ; Škopán, Miroslav (referee) ; Jonák, Martin (advisor)
The aim of this work is to design belt conveyor to transport gravel with traffic performance 60 t.h-1, 3 meters height difference and the distance between the axes of the drums 10 m. This work also contains a description of the basic parts of the conveyor, functional analysis according to ISO 5048 and the design of the main dimensions of the conveyor, conveyor drive and tensioning device. The work is accompanied by drawings.
|
|
|
Belt conveyor for recycle aggregate
Motloch, Martin ; Kašpárek, Jaroslav (referee) ; Malášek, Jiří (advisor)
The goal of this bachelor thesis is creation of a functional calculation, determination of the main dimensions, design of the drive and stress analysis of drive shaft for the driven drum of belt conveyor for recycled aggregates. Furthermore, the thesis contains description of each part of the belt conveyor, which were chosen from catalogs of companies dealing with production of these parts, or determined on the basis of the calculation.
|
|
|
Belt Conveyor
Hykolli, Denis ; Malášek, Jiří (referee) ; Kašpárek, Jaroslav (advisor)
The aim of this bachelor thesis is to design and calculate the inclined belt conveyor for the transport of gravel with the size of the fraction 16 - 32 mm, the difference between the end stations is 6 m and the material flow rate 100 000 kg per hour. This thesis includes analysis of transported material, brief description and distribution of belt conveyors, functional calculation according to standard ČSN ISO 5048, description and selection of components based on calculations, strength check of belt and subsequently driven drum. The thesis is accompanied by the required drawing documentation.
|
|
|
Conveyor for transport of scrap metal
Strašák, Milan ; Pokorný, Přemysl (referee) ; Škopán, Miroslav (advisor)
The purpose of this bachelor´s thesis is design construction of conveyor, which will transport preprocessing (cutting) scrap metal. The conveyor will reach to capacity 18 tonnes per hour and material will be transported to height 2,2 metres. This height is sufficient for transporting scrap into waste container.The work is especially focused on design of particular components, calculations of main dimensions, functional calculations and strenght calculations. Attainment of this work is posibility construction of conveyor, by task.
|
|
|
Belt conveyor for sand dumps
Czerner, Marek ; Kašpárek, Jaroslav (referee) ; Malášek, Jiří (advisor)
The aim of this bachelor thesis is to make design and calculation of belt conveyor for oblique transport of gravel sand fraction 0 - 4 millimetres with the capacity of 70,000 kg per hour, axial distance of 15 m and a slope of 18 °. This thesis includes a brief description of the main parts of the belt conveyor, the functional calculations according to standard ČSN ISO 5048, the determination of the main dimensions, the choice of structural elements, the design of the drive and an overview of manufacturers of similar devices. It is also performed stress analysis of the casing and shaft of the driven drum. To the thesis is attached all the necessary technical drawings and the control calculation of the support pins.
|
|
|
Belt conveyor for quartz sand
Ješuta, Jiří ; Škopán, Miroslav (referee) ; Pokorný, Přemysl (advisor)
The theme of this bachelor’s thesis is to design the conveyor belt for transporting quartz sand with the capacity of 80,000 kg per hour and axial distance between the drums of 39 meters and height difference of 11 meters. The thesis includes a description of the main parts of the conveyor belt and functional calculation according to standard ČSN ISO 5048 and determination of main dimensions and design of the conveyor drive. Furthermore, the function of the machine is evaluated for different grain and moisture of sand and the tensioning of the belt is solved. Finally the strength calculation is carried out for driving drum. The thesis is accompanied by drawings.
|
|
|
Belt conveyor for brick chippings
Jílek, Vít ; Pokorný, Přemysl (referee) ; Jonák, Martin (advisor)
The aim of this thesis is design of belt conveyor for transport of brick rubble. Thesis contains calculation and drawings of a belt conveyor according to the specified values. Specified values are transport capacity 110 000 kgh-1, center distance 49 meters in altitude of 17 meters. Functional calculations are carried out according to ISO 5048, 1994.
|
|
|
Belt conveyor for grawel sand
Herout, Jan ; Jonák, Martin (referee) ; Pokorný, Přemysl (advisor)
Bachelor thesis focuses on the constructional design of the conveyor belt given over the transport of the rinsed gravel by the assigned parameters. It´s functional calculation according to the norm ČSN ISO 5048 together with ČSN 26 3102 is performed. Bachelor thesis also contains the description of the particular constructional parts, solution of the conveyor belt´s drive, the checking calculation of the frame and a suggestion of the mechanical tightening of the belt. It is introduced a short analysis of the transporting material in the end of this thesis. It is enclosed drawing documentary materials with this thesis.
|
guest ::
