|
|
Distance Practical Education of Electric Machines
Šelepa, Jan ; Huzlík, Rostislav (referee) ; Hájek, Vítězslav (advisor)
This work contains scheme of practical point of distance training in the field of electric machines. It consits of three parts nessesary for consistence of entire work. In first part we have a description of data networks used to communication with virtual laboratory. Further there is a list and description of software fit for our study. These are programs capable of controling measurements, e.g. . LabView, Control Web, TestPoint, ScopeWin etc. In second part we have selection of measurment experiment. As experiment i measured the effectivness of three-phase transformer. The values archieved during the experiment where recorded and processed into form of graph and tables. In last part i used processed results to create functional simulation of measurement using MS Excel software. Further i calculated characteristics for equivalent circuit diagram of the transformer, that where equivalent to the real values measured in laboratory.
|
|
|
Laboratory model of a technological process
Macej, Maroš ; Pásek, Jan (referee) ; Zezulka, František (advisor)
In this thesis, there is implementation of the closed circuit mill model in the program Control Web. The model contains both logical and dynamical elements. There are four systems in the model. Three systems of the firsth degree are regulated by PI - controller, the fourth is regulated by a PSD - controller. The regulators were designed in the program Matlab using sisotool and simulink.
|
|
|
Simulators of balls and trunks laboratory models in Control Web
Chalupa, Petr ; Arm, Jakub (referee) ; Jirgl, Miroslav (advisor)
The aim of this bachelor’s thesis are creation of two program, able to simulate and visualize actions on laboratory models sorter logs and dosing balls. These models are used to learning PLC programing. In first part is deal with program Control Web. The next part describes both of models, their schema and functions. The following part describe creation and work of program, which I made. The last part of this work is deal with connection both programs with PLC by using MODBUS.
|
|
|
Control Systems for the Technological Process Model
Řegucký, Jakub ; Baštán, Ondřej (referee) ; Jirgl, Miroslav (advisor)
This work deals with systems and industrial controllers. The design of a model of a real technological process is demonstrated on a sewage treatment plant. A dynamic systems simulator serves to get an appropriate configuration for the chosen model which is then connected to a control system, measured and identified with the Matlab System Identification Toolbox. The calculation of regulator parameters and a process control is found in the second part of this work.
|
|
|
Control Systems for the Technological Process Model
Řegucký, Jakub ; Baštán, Ondřej (referee) ; Jirgl, Miroslav (advisor)
This work deals with systems and industrial controllers. The design of a model of a real technological process is demonstrated on a sewage treatment plant. A dynamic systems simulator serves to get an appropriate configuration for the chosen model which is then connected to a control system, measured and identified with the Matlab System Identification Toolbox. The calculation of regulator parameters and a process control is found in the second part of this work.
|
|
|
Simulators of boxes, parking and drill laboratory models in Control Web
Jaroš, Jiří ; Arm, Jakub (referee) ; Jirgl, Miroslav (advisor)
The subject of this bachelor thesis is creating of simulations and simulators of three laboratory models such as box sorting machine, parking lot and pedestal drill in a Control Web. According to the model tasks in the TIA programme, there are also samples of control programmes created. Used programmes, individual models, control electronics, all of the simulations and simulators are described here. Control programmes created in the TIA Portal are also included in the attachment.
|
|
|
Simulators of balls and trunks laboratory models in Control Web
Chalupa, Petr ; Arm, Jakub (referee) ; Jirgl, Miroslav (advisor)
The aim of this bachelor’s thesis are creation of two program, able to simulate and visualize actions on laboratory models sorter logs and dosing balls. These models are used to learning PLC programing. In first part is deal with program Control Web. The next part describes both of models, their schema and functions. The following part describe creation and work of program, which I made. The last part of this work is deal with connection both programs with PLC by using MODBUS.
|
|
|
Theatre Stage Control System with Graphics Interface
Ševcovic, Jiří ; Španěl, Michal (referee) ; Zemčík, Pavel (advisor)
This thesis focuses on a control system for theater scenes. The system is based on technology of industrial computers and can handle theatre scene equipment, such as slot. The asynchronous AC engines and computer controlled frequency changers are used along with various sensors. The control is done via CANopen protocol and the software was written using Control Web.
|
|
|
Control and visualization of techlologic process via IPC
Buchta, Luděk ; Libor, Matys (referee) ; Dvořáček, Martin (advisor)
The aim of this bachelor’s thesis was to acquaint with techniques and technologies used in the control and visualization of technologic processes. The industrial PC, PLC and Automation Panels from the company B&R was used on control of the technologic process in laboratory E541. Designed and implemented control algorithm contains three discrete controllers. The standard OPC is used for communication. Visualization for control workplace is created in the Program Control Web. Visualizations for operator workstations are created in the program Automation Studio. These visualizations are used to transfer information from the technological process.
|
|
|
Laboratory model of a technological process
Macej, Maroš ; Pásek, Jan (referee) ; Zezulka, František (advisor)
In this thesis, there is implementation of the closed circuit mill model in the program Control Web. The model contains both logical and dynamical elements. There are four systems in the model. Three systems of the firsth degree are regulated by PI - controller, the fourth is regulated by a PSD - controller. The regulators were designed in the program Matlab using sisotool and simulink.
|
guest ::
