|
Proposal of electrical equipment for soaking and drying cores for making castings
Čermák, Jiří ; Hájek, Vítězslav (referee) ; Veselka, František (advisor)
This diploma thesis deals with proposal of electrical equipment for soaking and drying cores for making castings at foundry in a Great Britain. It brings look at system of technical norms ČSN and it compares it with british system of technical norms British standards. The second part of this thesis contains detailed proposal of this equipment, including specification of control system, specification of power supply cables and control cables and particular technological units. The whole project documentation is enclosed as an inseparable attachment of this diploma thesis.
|
|
Connection of Solar Power Plant and Water management
Zajíček, Michal ; Vrána, Michal (referee) ; Baxant, Petr (advisor)
In the bachelor's thesis Connection of Solar Power Plant and Water management the author designs the technical solution of pump control using solar energy. The main reason is to make an automatic system for pumping the rainwater through filters due to increasing its quality. Powering the device with a solar power plant will reduce the energy requirements and will also make it possible to store surplus energy from the solar power plant into the potential energy of the water. The result of the work is the compact device with an automatic control system designed to control small 12 V pumps, theoretical design of the photovoltaic power plant to power the device and theoretical analysis of solar energy and water management issues.
|
|
Injection moulding machine prototype
Cikryt, Adam ; Jirgl, Miroslav (referee) ; Arm, Jakub (advisor)
This work deals with the design of a prototype injection molding machine for the company Elzaco s.r.o. The work includes theoretical analysis which breaks down injection molding machine into individual components and describes their functionality and their important parameters. Based on the analysis and determination of critical parameters of the injection molding machine, a detailed model of the injection molding machine is created. There are also requirements for electrical components such as motors, power supplies, heaters, temperature sensors, control electronics. The method of controlling such a machine is also discussed.
|
|
Control system for DC motors
Mikuláštík, Jiří ; Burian, František (referee) ; Kopečný, Lukáš (advisor)
This bachelor thesis deals with design of a control system for DC engines MCCRA12MP3N and MCCRA12MP. This system will be used to control a chassis and will allow smooth speed control of it. Serial interface will also be able to receive the desired and send out the current RPM values.
|
|
User Interface for Theatre Control System
Kobza, Lukáš ; Ševcovic, Jiří (referee) ; Zemčík, Pavel (advisor)
The topic of this bachelor's thesis is the technical equipment of theatre stage. In this work is offered the overview of stage technology and its control and furthermore the overview about user interfaces. The main goal was to create a new user interface for control system of upper and bottom machinery with the intention of application possibilities in distributed control systems with several operator stations.
|
|
Measuring cycles in control systems of CNC machines
Hamřík, Jiří ; Jaroš, Aleš (referee) ; Gregor, Lukáš (advisor)
In the first two points, the bachelor's thesis focuses on the comparison of CNC and NC machines and methods of control and programming of CNC machines, a description of the control system of CNC machines from selected producers and the characteristics of measuring cycles. Two producers were selected to describe the technology of measuring tools and workpieces using probes. In the third point of the bachelor's thesis, a practical demonstration of measurements with tool and workpiece probes from RENISHAW is performed. A tool correction was performed followed by measurement of the workpiece with a probe. For statistical evaluation, digital micrometer measurements were added, including comparison and evaluation of the obtained results.
|
|
Multi-Way robotic wheelframe
Krsek, Jiří ; Kopečný, Lukáš (referee) ; Šolc, František (advisor)
The master's thesis deals with a theoretical analysis of properties of a multi-way wheelframe and a selection of an appropriate method for the human operator control. Based on the analysis will be designed hardware and software of the control unit for controlling the movement of the robot's multi-way wheelframe. The electronic system will ensure a real-time processing the operator's instructions to control signals for the motors that will drive and implement the required angles of two driven wheels of the chassis. The proposal also reflects a sufficient equipment with input-output channels for any subsequent extension of additional sensors for testing the autonomous robot operation.
|
|
Controling the dust exhaust of smeltery for recyclation of aluminum waste
Jakubský, Ondřej ; Nadrchal, Zdeněk (referee) ; Trnka, Vladislav (advisor)
The work deals with controlling and visualizing technology of dust exhaust of smeltery for recyclation of aluminum waste. In the first part of the work are analyzed the different ways of automatic control. Based on the analysis is proposed control system configuration, algorithm of control, communication interfaces and sensors of alarm, measurement and regulation. The second part deals with visualization and remote administration of control system. On the basis of selection for the visualization software is designed and implemented a system that provides visualization of technology, the archiving of measured operating values, events and errors.
|
|
Industry 4.0 in according Design and Application of Production Machines
Serykh, Pavel ; Szabari, Mikuláš (referee) ; Knoflíček, Radek (advisor)
This Bachelor thesis is focused on the theme of CNC manufacturing machines and their use in accordance with the principles of Industry 4.0. The first part is a search of the current state in the field of the most frequently used CNC production machines in engineering according to their design and application. In the second part described principles, basic attributes and key technologies of Industry 4.0, defined concept. The last part is on top of the project conceptual workplace with CNC manufacturing machines in the premises of the technical high school VUTBR in accordance with the principles and tenets of Industry 4.0 and the evaluation of the results achieved.
|
|
Controlling ang checking system
Bláha, Jan ; Roubal, Zdeněk (referee) ; Szabó, Zoltán (advisor)
This bachelor thesis focuses on the design, fabrication and testing module 4 independent switching appliances. Switching can be controlled automatically according to the ambient temperature and time, or manually. The equipment includes the measurement of power. In the conclusion, the evaluation and lessons learned or problems in the implementation of module.
|