|
|
Precise adjustable power suplly
Pawlas, Andrzej ; Magát, Martin (referee) ; Kadlec, Jaroslav (advisor)
This bachelor´s thesis deals with the proposing precise switching power supply. This switching power supply works with a maximum of 99 % duty cycle. Input voltage is 12 V and output can be set in the range of 1.2 V - 11.9 V. Current can be a source of burden 0 A - 20 A. The entire power supply is controlled by microcontroller. While addressing the proposal switching power supply have been developed five prototypes. Last prototype works well, but the output appeared significant interference.
|
|
| |
|
| |
|
|
Controled laboratory voltage suplier
Vít, Tomáš ; Valach, Soběslav (referee) ; Macho, Tomáš (advisor)
The aim of my master’s thesis is the design and implementation of laboratory power supply with output parameters 0-25V and 0-2A and options to manage this resource by elements of the front panel or via a computer control program. Content is the theoretical analysis of the possibility of subsequent theoretical sources suggesting that it verified on the prototype laboratory resources.
|
|
|
Universal LED Source for testing of the light guide properties
Feilhauer, Jaromír ; Chmela, Ondřej (referee) ; Novák, Lukáš (advisor)
This bachelor thesis deals with the design of the LED source for testing the properties of light guides of car headlights. The thesis mainly includes the theory of the DC - DC converters, their categorization and the basic properties of the individual types of circuits. The design part is focused on the selection of the required chips. The importance of the chip as the basic description, characteristics and calculations of the values associated components are included. Then it follows with the design of the circuit diagram and the printed circuit, software and communication packet development and measurement results of real sample.
|
|
|
Traction Li-ion accumulator 28V/40Ah with internal protecting and control circuits
Kovář, Robert ; Pazdera, Ivo (referee) ; Vorel, Pavel (advisor)
This work is a design and construction solution for an inteligent charger of Li-Ion battery system.The system consists of an accumulator, built out of individual cells (serial-parallel sequence), protective and monitoring circuits and charger with control circuits. These control circuits of this charger collaborate with monitoring circuits. The base of this charger is a switching source (singlemode buck converter with transformer).The charger allows to supply relatively high power while sustaining small dimensions.(20A with 28V that´s 560W) Use of DC/DC converter is a base of charger and also delivers other benefits, such as high efficiency and easy control of output current.
|
|
|
Universal LED Source for testing of the light guide properties
Feilhauer, Jaromír ; Chmela, Ondřej (referee) ; Novák, Lukáš (advisor)
This bachelor thesis deals with the design of the LED source for testing the properties of light guides of car headlights. The thesis mainly includes the theory of the DC - DC converters, their categorization and the basic properties of the individual types of circuits. The design part is focused on the selection of the required chips. The importance of the chip as the basic description, characteristics and calculations of the values associated components are included. Then it follows with the design of the circuit diagram and the printed circuit, software and communication packet development and measurement results of real sample.
|
|
|
Electronic skylight
Coufal, Martin ; Šteffan, Pavel (referee) ; Boušek, Jaroslav (advisor)
Theoretical part of this thesis describes LEDs and other circuitry used for LED light design. LED light is designed, manufactured and put into operation. This thesis examines possibilities of measuring exterior light and its key parameters. The device uses two sets of LEDs – warm white and cold white to create light with parameters dependent on exterior light. LEDs are driven by constant current sources that are designed, manufactured and examined in this thesis. The device is microprocessor-controlled, which allows to switch between multiple modes of operation. Flyback SMPS is used to power the microcontroller.
|
|
|
Regulation of DC hub dynamo
Navrátil, Petr ; Knobloch, Jan (referee) ; Huták, Petr (advisor)
The aim of this bachelor’s thesis is the theoretical preparation, design and implementation of a DC converter for a bicycle charge dynamo with compensation for its large inductance. The designed converter will be able to use the maximal power of the dynamo.
|
|
|
DC-DC converter for matrix beam module
Sikora, Roman ; Dobesch,, Aleš (referee) ; Hudcová, Lucie (advisor)
The master thesis deals with the development of buck-boost DC-DC converter which supplies matrix beam module. The design is focused on testing two-phase boost converter and three channel buck converter manufactured by NXP Semiconductors. Part of the design is implementation of microcontroller for converter control and communication with computer. Part of the thesis is also to design user interface on Windows platform for easy system configuration. Next thing the thesis deals with is designing load for DC-DC converter that is variable and can make different current consumption. One part of this thesis is focused to achieve the lowest conducted emissions and to maximize conducted immunity. Part of this project is production of a prototype and prototype testing.
|
guest ::
