|
Bucket elevator
Havlena, Tomáš ; Pokorný, Přemysl (referee) ; Jonák, Martin (advisor)
The aim of this bachelor‘s thesis is the design of the bucket elevator for transporting grain according to the assignment. The first chapter is a brief literature review which deals with the construction of the elevator. The second chapter is drawn capacitance calculation and design of the drive. In the last part, there is a control of the individual components. The work includes drawing documentacion.
|
|
Design of belt grinder
Bartuněk, Jiří ; Tůma, Zdeněk (referee) ; Pavlík, Jan (advisor)
The aim of this bachelor’s thesis is to design a general-purpose stationary belt sander. Current knowledge and a working principle of a belt sander is delineated in the introduction. Furthermore, all possible methods are shown, one of which is selected as the most convenient. That design is further compiled as a 3D model with a calculation report attached.
|
|
Bucket hoist for food grain transport
Šustek, David ; Pokorný, Prokop (referee) ; Škopán, Miroslav (advisor)
The aim of this thesis is a construction solution of a bucket elevator for transportation of grain with specifiedtransport quantity and specified transport height. In the first part of the thesis, a brief overview of individual parts of the bucket elevator and their influence on the function of the devicewas performed. The conveyor parameters are then determined based on the overview. The second part of this work focuses on the theoretical calculations. Using these calculations, the individual components of the bucket elevator are selected or designed. This part includes a control of the safety of the drive shaft, together with the subsequent calculation of the bearing durability. This thesis further comprisesa relevant drawing documentation of the whole bucket elevator assembly and the subassembly of the driving station.
|
|
Newly built apartment building in Ivančice, implementation of roof cladding
Křeháček, Matěj ; Rychtecký, Martin (referee) ; Kovářová, Barbora (advisor)
The subject of my bachelor's thesis is the design of the supporting structure of the roof including plumbing work and roofing work of a residential building in the village Ivancice u Brna. It is a new building with 16 residential units. The building is without a basement with ground floor, aboveground floor and attic. The bachelor's thesis includes: a technical report, situation of building relationships with the wider transport routes, statement of measurement, technical regulations, organization of construction solutions, schedule of work, design of mechanical assemblies, quality requirements, safety work and details.
|
|
Centrifugal bucket hoist
Kotačka, Petr ; Malášek, Jiří (referee) ; Jonák, Martin (advisor)
This bachelor thesis deals with bucket elevator design for transport of dry, loose and non abrasive materials according to given parameters. In the introductory chapter a short search describes the concept of suggested solution. Functional calculation, designs and checks of individual proposed equipment elements are stated in the other chapters. In the design requirements for centrifugal bucket discharge as well as miscellaneous way of filling are preferred. Appropriate drawing documentation is enclosed with this thesis.
|
|
Design of belt grinder
Bartuněk, Jiří ; Tůma, Zdeněk (referee) ; Pavlík, Jan (advisor)
The aim of this bachelor’s thesis is to design a general-purpose stationary belt sander. Current knowledge and a working principle of a belt sander is delineated in the introduction. Furthermore, all possible methods are shown, one of which is selected as the most convenient. That design is further compiled as a 3D model with a calculation report attached.
|
|
Belt conveyors - special constructions
Hejl, Radek ; Pokorný, Přemysl (referee) ; Malášek, Jiří (advisor)
The aim of this bachelor thesis is to draw up an overview of manufacturers of belt conveyors and their individual components together with clarification of functions and construction of selected units. The work includes basic division, overview of manufacturers of different types of belt conveyors, diagram and description of individual parts, analysis of conveyor belts, drums, belt cleaners and others, together with the overview of manufacturers of these components. It also contains an assembly drawing of the selected unit.
|
|
Long-distance belt conveyance
Monsport, Jan ; Kašpárek, Jaroslav (referee) ; Zeizinger, Lukáš (advisor)
This bachelor thesis deals with the draft of long-distance conveyor transportation of dolomite that is crushed according to specified parameters. In the first chapters, there is a description of the conveyor transportation and its classification. In continuation, the individual parts of the long-distance conveyor belt as well as the characteristics of the transported material are described. In addition, this thesis deals with the calculations according to the ČSN ISO 5048 standard. The selection of individual components of the conveyor belt transportation is captured here as well.
|
|
Bucket hoist for food grain transport
Šustek, David ; Pokorný, Prokop (referee) ; Škopán, Miroslav (advisor)
The aim of this thesis is a construction solution of a bucket elevator for transportation of grain with specifiedtransport quantity and specified transport height. In the first part of the thesis, a brief overview of individual parts of the bucket elevator and their influence on the function of the devicewas performed. The conveyor parameters are then determined based on the overview. The second part of this work focuses on the theoretical calculations. Using these calculations, the individual components of the bucket elevator are selected or designed. This part includes a control of the safety of the drive shaft, together with the subsequent calculation of the bearing durability. This thesis further comprisesa relevant drawing documentation of the whole bucket elevator assembly and the subassembly of the driving station.
|
|
The study of the behavior of track chassis using dynamic simulation
Kukla, Lukáš ; Kašpárek, Jaroslav (referee) ; Jonák, Martin (advisor)
Objectives of the thesis is to develop research summarizing knowledge about the types of tracked undercarriages for existing mobile machines. Developing critical analysis of the various designs of track undercarriages with regard to their use - forest terrain, unpaved surface. Creating a basic structural design of one of the selected type of belt chassis suitable for use in the field. Verification by the design using dynamic simulation.
|