|
|
The roof structure of the industrial hall in Kyjov
Nosková, Nela ; Pilgr, Milan (referee) ; Šmak, Milan (advisor)
The Bachelor´s thesis describes design and static assessment of the main roof structure supporting elements of the roof structure of the industrial hall in Kyjov. The hall is designed from timber. The aisle is rectangular floor plan 17,0 x 40,0 m. The main bearing structure causes as a frame truss supported by columns. Solid frame is made from solid timber C24. Purlin is designed from solid timber C24. The static calculation also includes fire resistance reports of single elements. Static analysis has been accomplished by student version of the SCIA Engineer 2012 software.
|
|
|
Storage hall
Osyková, Martina ; Šulák, Pavel (referee) ; Laníková, Ivana (advisor)
The master thesis ´´Storage hall” deals with designing of selected elements prefabrikated skeleton hall. Discussed elements are truss, beam, girder, column and prefabricate footing. Within above mentioned elements was carried out static analysis, design of reinforcement and reinforcement drawings. Analysis of internal forces for columns and prefabricate footing was carried out with usage of the program Scia Engineer, 3D model of the whole object was created. Analysis of internal forces for the rest of elements was carried out with help of manual calculation. Those elements were designed with consideration of ultimate limit state. Serviceability limit state assessment was carried out within the truss.
|
|
|
Reinforced concrete structure
Vaněčková, Adéla ; Čairović, Dorde (referee) ; Šulák, Pavel (advisor)
The aim of bachelors thesis is to design of the frame monolithic reiforced concrete frame construcition of a multistoried garage. Project designe sof a typice storey of construction. The supporting structure consist of a frame consisting of rungs, which are stored by beams and slab. Rungs are supported by columns. Reaction of the structure are transmitted to the foundation soil by footings. The design was made according to standard ČSN EN 1992 – 1 – 1. Structural analisis was modeled using Scia Engineer 20014 – Student vision. The results were validated by simplified manual method.
|
|
|
Static analysis of reinforced concrete roofing of platform
Popovič, Tomáš ; Strnad, Jiří (referee) ; Zich, Miloš (advisor)
The thesis deals with the static solution of reinforced concrete roofing of bus platform. It is a monolithic reinforced concrete frame structure, which is consisting of circular pillar and girder. The girder has the general shape. The board is double-sided embedded into girder. The loads acting on the construction are transmitted to the foundation soil using reinforced concrete foundation blocks. The content of this thesis is based on the dimensioning of individual elements of the support structure according to ČSN EN 1992-1-1. These elements are dimensioned for the ultimate limit state. The main outputs of this static calculation are drawings of shape and drawings of reinforcement.
|
|
|
Assembly hall
Beran, Miroslav ; Pilgr, Milan (referee) ; Barnat, Jan (advisor)
The diploma thesis deals with the design and assessment of the steel supporting structure of the production hall. The transverse dimension of the hall is 21,00 m, the longitudinal dimension is 70,00 m, the height of the hall is 17,56 m. S355 steel is used as the main supporting material. The supporting part of the hall consists of columns on which is placed a truss and two crane tracks at two height levels. Three different types of purlins and pillars are considered in the design of the steel structure. For the selected variant, a static calculation of the main bearing elements, including selected details, is drawn up and drawings are drawn up.
|
|
|
Industrial building
Nitková, Jana ; Buchta, Stanislav (referee) ; Sýkora, Karel (advisor)
The bachelor thesis contains design of steel one-aisle industrial building with span 24 m, lenght 63 m and height of the holder of a crane track girder 8,7m. There are two overhead cranes with load capacity 12,5 tons and 32/8 tons in industrial building. The structural material hall is made of steel S 235. The drawings includes transverse and longitudinal section, platform and manufacturing drawing of continuous truss.
|
|
|
Steel load-bearing structure of an industrial hall
Jaroš, Jakub ; Pešek, Ondřej (referee) ; Balázs, Ivan (advisor)
The bachelor´s thesis contains design of one-aisle industrial hall with span of 24 m, length of 72 m and height of the holder of craneway 9 m. In hall there are two cranes, first one with load capacity of 32/8 t and second one with load capacity of 12,5 t. The roof structure is designed as a system of truss girders and truss purlins. Spatial rigidity of the structure is secured by bracing. Main structural material is steel S235 JR+AR ČSN EN 10025-2. Drawings contain flor wiew and sections of hall and manufacturing drawings of truss.
|
|
|
Design of precast concrete hall
Prášek, Martin ; Nováček, Jan (referee) ; Zich, Miloš (advisor)
Master’s thesis describes the structural design and static analysis of selected elements of prefabricated reinforced concrete industrial building, that will be used as storage hall. Purpose of thesis is elaboration of assembly drawings of the project documentation and drawings of formwork and reinforcement assembly of selected elements. Calculations were performed in computer programs for static analysis SCIA Engineer 16, IDEA StatiCa and FIN EC. Drawing were made in programs Allplan 2016 and AutoCad 2015.
|
|
|
Production hall
Londa, Jan ; Pilgr, Milan (referee) ; Sýkora, Karel (advisor)
This thesis deals with steel structures of industrial building with the arrangements of the building with a span of 18 m, a length of 18 m and a corresponding height of cantilever of a crane track girder is 6,6 m. In the hall are considered two cranes with a capacity of 20/5 t and 32/8 t. The structures is designed for the district of Olomouc.
|
|
|
Reinforced concrete structure of a administrative building
Januš, Ondřej ; Švaříčková, Ivana (referee) ; Šulák, Pavel (advisor)
The main subject of this bachelor thesis is focused on the design of reinforced concrete locally supported slab of a multifunction building. Internal forces are calculated by a computer software SCIA Engineer and its resultes are compered with simplifield method. Another part includes the design of a reinforced concrete stairway and a column situated in the center of the disposition. The calculation method is based on ČSN EN 1992-1-1.
|
guest ::
