|
|
Modeling metamaterial microwave resonators
Zvolenský, Tomáš ; Kovács, Peter (referee) ; Raida, Zbyněk (advisor)
Práce je věnována modelování mikrovlnných rezonátorů z metamateriálů (materiálů se záporným indexem lomu). V úvodu je rozebráno, co metamateriály jsou, jak se vytvářejí a které jejich vlastnosti jsou podstatné při návrhu rezonátorů. Následuje návrh planárního rezonátoru z metamateriálů. Pro tento účel byly naprogramovány funkce počítající rozměry jednotlivých součástí struktury. Simulace navržené struktury probíhala v programu Zeland IE3D. Simulované struktury byly optimalizovány s ohledem na požadované kmitočty rezonance. První rezonátor sestával z jedné elementární buňky, druhý ze dvou buněk, naladěných na rozdílné kmitočty. Rezonátory byly vyrobeny a experimentálně byly ověřeny jejich vlastnosti.
|
|
|
Estimation of equivalent circuit parameters of a piezoelectric resonator
Ryšavý, Lukáš ; Majzner, Jiří (referee) ; Sedlák, Petr (advisor)
In this thesis, a simple measurement setup including control software is designed to estimate the parameters of Mason electrical equivalent circuit for piezoelectric resonators. Direct measurements can evaluate variables, such as mechanical quality factor, parallel resonance, serial resonance and serial resistance. These variables are used to estimate remaining parameters. The software is implemented in C++ Builder. Experimental study and verification were carried out on several quartz crystal and piezoceramic samples. The measurements are in good agreement with simulations as it is illustrated by a low value of relative error. The measurement setup will be used for scientific purposes of Dept. of physics FEEC BUT.
|
|
|
Design and Realization of Acoustic Adjustments of Listening Room
Vajda, Michal ; Miklánek, Štěpán (referee) ; Schimmel, Jiří (advisor)
This bachelor thesis is devoted to the design of acoustic modifications of residential space and the subsequent implementation of these modifications. Its aim is to design an optimal solution of the space for listening to music in accordance with the Czech Technical Standards. The basic parameters investigated are reverberation time and acoustic quality criteria. The thesis deals with simulation in the EASE modelling program and addresses situations before and after acoustic treatment. The following methods and procedures are used to comprehensively address the above mentioned treatments and to achieve the set objective. Furthermore, the simulation is verified with a custom calculator in Excel. After using the absorbers suitable for adjustment, the implementation with the final measurement of the reverberation time is carried out. Finally, an additional modification design is created using Helmholtz resonators. The implemented methods achieve an optimal and frequency balanced reverberation time and the room can be used as a mixing hall for multi-channel sound recording.
|
|
|
The Innovation of organ pipes
Holba, Stanislav ; Musil, Jaroslav (referee) ; Jirásek, Ondřej (advisor)
The thesis deals with the sound colour of organ pipes in relation to the way of tone excitation, physical dimensions of organ pipes and the construction material used. The sound colour of individual organ pipes is described by means of spectral analysis and selected psychoacoustic variables. The obtained knowledge is further used for the production of organ pipes from atypical materials and modification of conventional organ pipes. Resonator simulations are performed for the materials used for the production in order to determine the theoretical value of the resonant frequencies. These values are compared with the results of spectral analysis of the sound of physical organ pipes.
|
|
|
Design and Realization of Acoustic Treatment of Small Recording Studio
Tkadlec, Vojtěch ; Husník, Libor (referee) ; Schimmel, Jiří (advisor)
This bachelor thesis deals with the topic of acoustic properties of an enclosed space, their detection and modification. The thesis examines the acoustic properties of a small enclosed space, which were determined by simulation using a virtual 3D model and subsequently verified by measurement. After finding out the properties, a substantial part was also devoted to their modification, where the task was to design the acoustic elements so that the resulting length of the reverberation time corresponds to the optimal values for a small recording studio. The design of the elements is followed by their construction, followed by a re-measurement of the space. Furthermore, the work summarizes the principles of modeling and simulation of 3D models.
|
|
|
Piezoelectric MEMS resonators for sensing applications
Klempa, Jaroslav ; Svatoš, Vojtěch (referee) ; Gablech, Imrich (advisor)
Basic principles and processes used during fabrication of microelectromechanical systems are presented in this work. This thesis is focused on material properties, deposition, lithographic and micromachining processes. Fundamental principles and applications of piezoelectric resonant structures are described as well. Final part of this work is devoted to simulation of resonant beams using FEM method in ANSYS® Workbench, practical fabrication and characterization of piezoelectric MEMS resonators.
|
|
|
Model of breathing stabilization in infant using stochastic mechanosensoric stimulation
Laníková, Petra ; Čmiel, Vratislav (referee) ; Provazník, Ivo (advisor)
The goal of this thesis is to create a stochastic model of the breathing automaticity oscillator, including its management with the possibility of stopping and restarting oscillation by an accidental process. The oscillator is implemented by computer program MATLAB R2014a and the results are compared with real records of breathing patterns in newborns. These results are represented with pictures. To evaluate these records is used knowledge of respiratory automatism and sleep apnea syndrome, especially apnea in preterm neonates
|
|
|
Realization of the positioning device for mapping electromagnetic fields
Jozífek, Eduard ; Drexler, Petr (referee) ; Nešpor, Dušan (advisor)
This paper deals with the measurement of electromagnetic fields in reactive zone and proposing an automated workstation for its measurement. The sample is a periodic structure of the circular split resonators, which is due to the magnetic field generated from the supplied loop antenna is brought to resonance and itself becomes imaginary antenna. The measuring probe is placed on the cross-positioning table movement is controlled by two stepper motors.
|
|
|
Adaptive Digital Filtering of Biological Signals
Ištok, Martin ; Kozumplík, Jiří (referee) ; Provazník, Ivo (advisor)
The main objective of this bachelor’s thesis was to describe adaptive digital filtering theory including different types of the adaptive algorithm and adaptive filter. An adaptive systém is used for power line interference canceller for ECG signal. The thesis includes design of 4 adaptive filters: simple adaptive filter, simple adaptive notch filter, adaptive notch filter using resonator and adaptive notch filter using adaptive resonator. It also contains basic testing of the filters based on different settings. Different settings are also evaluated.
|
|
|
Estimation of equivalent circuit parameters of a piezoelectric resonator
Ryšavý, Lukáš ; Majzner, Jiří (referee) ; Sedlák, Petr (advisor)
In this thesis, a simple measurement setup including control software is designed to estimate the parameters of Mason electrical equivalent circuit for piezoelectric resonators. Direct measurements can evaluate variables, such as mechanical quality factor, parallel resonance, serial resonance and serial resistance. These variables are used to estimate remaining parameters. The software is implemented in C++ Builder. Experimental study and verification were carried out on several quartz crystal and piezoceramic samples. The measurements are in good agreement with simulations as it is illustrated by a low value of relative error. The measurement setup will be used for scientific purposes of Dept. of physics FEEC BUT.
|
guest ::
